Used Steel Bending Machine for sale (72,271)

Condition: used, Year of construction: 2007, 2100 mm 7 mm 6 mm roll diameter 190 mm min. dia. 285 mm 4 kW 3200 kg 4000x1350x1500 mm Equipment: - motorized rear roller adjustment - Digital display - Automatic conical bending. - Foot switch Cpsdpeyb S Etsfx Ac Nsu - Safety devices

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Cjdoyfph Hjpfx Ac Nepu Drive: Hydraulic cylinder and roller chain

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Max. sheet thickness: 4 mm Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Electrical connection: 7.5 kW Cpodpfsyfm Udox Ac Nju Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997

Condition: new, Ostas 3-rolls round bending machine SMR-S 1570 x 130 Special equipment included in the price motorized lower roll adjustment hardened rolls motorized back roll adjustment 2 x digital display sheet width 1570 mm sheet thickness 6,0 mm max. sheet thickness 5,0 mm bending roll length 1570 mm smallest diameter 195 mm roll diameter 130 mm Cpjdpfeiu Hvtex Ac Nou weight 1520 kg dimension L-W-H 3050 x 630 x 1020 mm motor 2,2 KW Equipment: upper and lower roll electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line, CE-sign values apply to St-37 / 240 N/mm²

Condition: new, roller diameter: 140 mm, - Capacity 1050 x 6 mm - Electrically adjustable rear roller - Conical roller - Swiveling top roller - Brake motor - Emergency stop Codpfjpwgdyex Ac Njpu - Documentation - 400V

Condition: used, Year of construction: 2006, machine/vehicle number: 192050, number of rollers: 3, shaft diameter: 55 mm, roller diameter: 155 mm, rotational speed (distance/time): 4,500 mm/min, overall weight: 350 kg, total length: 660 mm, total width: 900 mm, total height: 1,355 mm, power: 1.5 kW (2.04 HP), 1 used ring section bending machine SAHINLER PK-35 F Includes: - 3 rollers, 2 of which are driven - Shafts made of special steel Cedpfx Aceybbuqe Nspu - Horizontal & vertical operation possible - Machine body made of special cast iron

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Cedogqfmnspfx Ac Nspu Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: like new (used), Year of construction: 2022, Stierli bender 120 CNC Horizontal bending machine, Siemens controller Working force 12 tons Cpodpfoflc R Uex Ac Nou Very universal, for flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools. tool height 130 mm Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Backgauge length stop 1000/2000mm Program memory 200 programs Bending sets 10 bends Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2022, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Cpsdpfx Acegqfp He Nju Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Codpfegqflqjx Ac Nepu Demonstration machine year 2022 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm Cpodpfx Aceya Iaqj Nsu - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling option - Pivoting top roller - Brake motor Csdpfx Aowfn E Eoc Nspu - Foot pedal control - Emergency stop - Documentation - 400V

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. Cpedpfx Aoydn Shsc Nsu If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: Cpjdpfottah Rsx Ac Nsu → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure Cpedpfxjtr U Hlj Ac Nju → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. CP182A-X2 (outlined in red) Machine control panel with pedal and programmable board - ordered new from supplier in Lithuania CP4024A (outlined in green )Machine tool side supports, to guide the workpiece, to roll the spiral. Left and right sides, complete set - ordered new from supplier in Lithuania. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg Cpedpfx Acoxdnx Hj Neu ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail Cjdpfx Aoh S Uirjc Njpu -tool rest -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too Cedsfifbbopfx Ac Nepu RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Csdpfx Acjfifa As Nspu Freight costs on request

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm Cedstq Du Repfx Ac Njpu working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement / kW weight of the machine ca. 1000 kg required space 1200 850 x 1200 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 65 Upper shaft diameter: Ø 60 mm Cjdpjw Nbmpofx Ac Njpu Bottom shaft diameter: Ø 50 mm Roll diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Standard Accessories: Steel construction welded frame 3 rolls are powered Hardened and ground shafts made of high tensile special steel Horizontal and vertical working position Hardened standard rolls Mobile control panel 3-axis mechanical lateral angle guide rolls Brake motor equipped for precision bending Digital read-outs (2 pcs) Optional Equipment: NC control Hydraulic lateral guide rollers (2-axis) Spiral bending crane Special profile rolls

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm Cjdpfjuddfbsx Ac Nopu total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Cpedpfx Ajuddi Hoc Nsu Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Cpjdpfx Acexfb Ikj Nju Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Codpfx Aeuddcaoc Nepu Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.