Used Splinters Separator for sale (6,681)

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Depth: 500 mm Hfodpfx Ajzqc Uvegtol Weight: approx. 20 kg Condition: good, second-hand

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: Hodpfx Agezx Ergotsfl ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 13,067 h, functionality: not functional, Equipment: documentation/manual, Control system issues (under Programs) Electrical fault (control boards) Suitable for spare parts Tool changer – chain conveyor included Without tools Already disassembled and stored separately! Hsdpfx Aeznvm Hegtefl

Condition: used, functionality: fully functional, Amano PiA-30U Dust collector Hfodpforyxmxox Agtjl Good working condition. Please check out our other listings as well.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Hsdpezx S Egsfx Agtefl Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Year of construction: 1992, Made in Germany Electrostatic filter Suction capacity: max 2200 m³/h Weight: 150 kg Operating voltage: 400 VAC, 50 Hz, Current consumption: 3.2 A Hjdpfx Agsv D Drmotjfl

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Hedpozvychsfx Agtjfl

Condition: refurbished (used), functionality: fully functional, SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Technical specifications: Manufacturer: Sepamatic Hfjdpew Dcrksfx Agtsl Model: SEPA 2000T Mesh size: 5 mm Power: 11 kW Power supply: 400V, 50Hz Power consumption: 22A Control voltage: 24V Electrical diagram: No. 0695030 B Made in Germany Dimensions: Length: 165 cm Width: 150 cm Height: 200 cm Application: The SEPA 2000T separator is ideal for processing poultry, pork, and beef. Thanks to its 5 mm mesh, it allows for high-quality separation of raw materials while maintaining high efficiency. Why choose the SEPA 2000T? Robust construction High separation efficiency Easy operation and maintenance Compact dimensions ideal for production lines

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Desiccant dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 Hfedjx Na Itspfx Agtol 4 insulated granular material silos, each with a capacity of 200 L With additional heating 3 material separators Manufacturer: Colortronic This system has been checked for all functions and is fully operational! PRICE REDUCTION FROM 6450 TO 6200 EUR!!!

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Hodszizh Sspfx Agtefl Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Hedpfeyf Atvjx Agtefl Series: TSC.134.018

Condition: used, Separator for clarifying fruit juice Additional title: Plate centrifuge with self-emptying drum Drum speed: 5000 rpm Density liquid: 1000 kg/m³ Density solid: 1200 kg/m³ Features: Centrifuge, motor, sludge discharge, control cabinet Hfjdsztx S Njpfx Agtol

Condition: like new (used), functionality: fully functional, empty load weight: 900 kg, maximum load weight: 5,000 kg, overall weight: 6,000 kg, tire size: 300 x 80, tire condition: 100 %, trailer brake: trailer braked, Year of construction: 2025, Water tank trailer, 5000 liters - 25 km/h, with ABE (German type approval) Ideal for municipal services (gardening department), civil engineering, road construction for dust control, construction site supply, agriculture, or as a professional water tank for large companies – anywhere where water is needed on site. Equipped with a mounted wide-spreading nozzle and spray bar with nozzles. Coupling height approx. 700 mm. Automatic support wheel with folding mechanism. PTO pump for filling and emptying. Additional PTO pump for operating a high-pressure cleaner. Hjdpfx Agjzy Dy Eotjfl As-new demonstration unit from 2025. Please send us your realistic offer. VAT can be shown separately.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Hjdpfx Asqabm Eogtofl Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. Hfsdpfeyanlasx Agtol The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Year of construction: 2020, condition: refurbished (used), Dear customers, To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Hjdpfoftb Ebox Agtefl Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Year of construction: 2024, condition: good (used), Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. The mixing of compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, and gravel. Refilling of structures and trench backfilling, etc. Shafts for other grain sizes or applications can also be installed, please inquire for details. The mounted adapter can be purchased or modified, not included in the price. For excavators from 4 t For wheel loaders from 3.5 t Hfodpjw N Rxhjfx Agtjl Weight in kg: 400 Throughput: 10.5 - 15 m³ / hour Leak oil connection required: no

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, This is a combination steamer, model SCC 61WE, from the premium manufacturer Rational, in an electric version. This combination steamer is equipped with a racking system with 6 shelves. The unit has been completely overhauled in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. Hedpfx Ajz Ahvpegtsfl These are example images; actual images will be available soon. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational appliance model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This combination steamer offers space for 6 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Power connection: V: 400 / kW: 11.0 / Hz: 50/60 Capacity: 6x1/1 GN Weight: approx. 103 kg Serial number: E61SH12062305275 Year of manufacture: 2012 Condition: used, completely overhauled, fully functional Additional information: With care Control - self-cleaning system In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature probe Hand spray with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time setting 7 cleaning levels for unattended cleaning - even overnight Steam injection adjustable in 3 levels - from 30°C to 260 °C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 1979, condition: used, Westfalia Separator, last used in a fruit juice plant. The separator's control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit. Additional title: Disc centrifuge Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h Hfjdpfx Asyr Ic Njgtel Drum velocity: 6500 rpm Density liquid phase: 1 kg/dm3 Density solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1485 mm Width: 850 mm Height: 1470 mm Weight: 1200 kg Material: Stainless steel surfaces that come into contact with the product Position: on a 685 x 585 mm foundation Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, drain, solids outlet, control water drain, circulation monitor, oil sight glass, brake, control valve, hood flushing, pressure gauge

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition. Hodpfszhr Rhox Agtofl

Year of construction: 2008, condition: used, machine/vehicle number: 51E361-010-02, IFE Processing Technology Year of manufacture: 2008 Hsdpfx Agsxztbhetofl For sale: 2 identical screens, each equipped with 2 unbalance motors. The price is for 1 screen.

Condition: used, Mayfran Emulsion Treatment System, Emulsion Separator, Chip Handling System, Used Machine Manufacturer: Mayfran Overall dimensions: 3300 x 2100 x 2200 mm Year of manufacture: 2004 Processing and filtration capacity: 700 l/min Hjdjy Uc Tpopfx Agtsfl Filtration precision: 40 ppm > 20 µm Tank volume: 7250 l Pump performance: 4 kW; 160 l/min; 5 bar

Condition: good (used), clear span: 2,775 mm, total length: 17,350 mm, load per truss pair (max.): 1,023 kg, Technical data for the pallet racking system: Racking system: Jung Heinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: approx. 17,350 mm Number of bays per racking row: 6, each 2,775 mm Number of levels including the base level: 6 Technical data for the capacity: Pallet spaces per bay: 21 Pallet spaces per racking row: 126 Total pallet spaces: 126 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): approx. 341 kg Included in the scope of supply: 07x Pallet racking uprights, used Material color: RAL 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole pitch: 50 / 50 mm incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted truss) Height: 9,000 mm Depth: 1,100 mm 72x Pallet racking beams, used Material color: orange Box profile: 85 x 40 mm Hedpfxoz A D Dgo Agtsfl Beam type: GN85x41 Connector: 5 hooks Clear width: 2,775 mm Max. load per pair of beams: 1,023 kg, with evenly distributed load. 144x Locking pins, used Material color: Sendzimir zinc-plated For securing the longitudinal members against unintentional lifting out. 28x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, zinc-plated Approved for: cracked concrete 14x Shims, used Design: completely zinc-plated For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2014, Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Food-safe with stainless steel design Hodpfx Agswkbfvstsfl Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2018, Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Hsdpfevzbg Nsx Agtefl