Used Smoke System for sale (40,222)

Condition: new, Hygienio B1.N1 Steam Disinfection System The B1.N1 is ideally suited for ambulances, medical practices, dental clinics, and smaller spaces. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated operation, the Hygienio B1.N1 is just the thing for you. The ultimate, simplified disinfection system – developed for easy operation and handling. The B1.N1 model dispenses with the electronic control unit and is therefore particularly easy and effortless to use. Thanks to the manual and direct system status check, you have full control over the selection of the correct application mode – whether disinfectant or steam. The fluid tanks are equipped with optical level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant rubber wheels Consumption: 2 liters of disinfectant solution per hour Tank capacity: Water tank: 2 l / Disinfectant tank: 2 l Itedpfx Ahsykt Inebjn Working pressure: 2.5 - 4 bar Dimensions: 93.5 x 48.5 x 35.5 cm Lance length: 240 cm Weight: 23 kg Length of power cable: 4 m Manufacturer's price: €3,500 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, This listing is for the Malvern CHR6000 + CHR7100 OMNISEC RESOLVE and REVEAL GPC/SEC These units are in full working condition and ready for immediate use What the System Measures The combined OMNISEC RESOLVE and REVEAL GPC/SEC System provides absolute molecular weight, intrinsic viscosity, concentration, and conformational data in a single run. This eliminates the need for calibration standards, improving accuracy and confidence in results. OMNISEC RESOLVE – The Chromatography Module OMNISEC RESOLVE integrates four key components into a single unit: Pump: Delivers a flow rate range of 0.01–10 mL/min with low pulsation (0.15% at 1 mL/min in water), ensuring stable baseline signals. Degasser: Features a low-volume (960 µL) design for rapid solvent exchange, enhancing system productivity. Autosampler: Accommodates up to 192 samples, with temperature control from 4°C to 60°C, suitable for both vials and 96-well microtiter plates. Column Oven: Controls temperatures up to 65°C, supporting up to six analytical columns for optimal separation conditions. This integrated design minimizes baseline noise and enhances measurement sensitivity, particularly for low-concentration or low-molecular-weight samples. OMNISEC REVEAL – The Detector Module OMNISEC REVEAL is an advanced, fully integrated, temperature-controlled multi-detector module that includes: Refractive Index (RI) Detector: Highly sensitive and stable, enabling accurate concentration measurement, even for low-concentration samples. UV/Vis Photodiode Array (UV-PDA) Detector: Measures absorbance at any wavelength from 190 to 900 nm, providing versatile detection options. Light Scattering Detectors (LALS & RALS): Deliver market-leading sensitivity, allowing measurement of molecular weights as low as 200 g/mol and injection masses as low as 100 ng, for highly reliable results. Viscometer: Features automated balancing for precise intrinsic viscosity measurements, with a user-exchangeable capillary bridge to minimize maintenance. The fully temperature-controlled design improves detector stability and overall sample characterization, ensuring optimal performance for sensitive applications. OMNISEC Software Ijdpfx Ajychy Ajhbotn The OMNISEC software suite provides: Unified instrument control, data acquisition, and analysis. Calculations for molecular weight (Mn, Mw, Mz), polydispersity, radius of gyration (Rg), intrinsic viscosity, and Mark-Houwink parameters. Support for automated, unattended operation to streamline workflows. Key Advantages Exceptional Sensitivity: Measures molecular weights down to 200 g/mol and injection masses as low as 100 ng. Broad Wavelength UV/Vis Detection: Enables absorbance measurements across 190–900 nm. Superior Stability: Temperature-controlled detectors ensure consistent, high-quality results. Versatility: Ideal for polymers, polysaccharides, and proteins, with multi-detection SEC offering unmatched characterization detail. Integrated Design: Reduced inter-detector volume improves peak resolution and data quality. Accurate Viscosity Measurement: With automated viscometer balancing, ensuring reproducibility.

Condition: good (used), Technical data for the pallet racking system: Racking system: Jungheinrich Type: Esmena Technical data for the installation: Number of racking rows: 1 Length per racking row: 53,433 mm Number of bays per racking row: 5 Number of levels including the base level: 2 Technical data for the capacity: Pallet spaces per bay: 19 Number of pallet spaces per row: 228 Total number of pallet spaces: 288 Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.d. Weight per pallet (max.): approx. 800 kg Included in the scope of delivery: 20x Pallet racking uprights, used Material color: blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System hole spacing: 50 / 50 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) Height: 6,000 mm Depth: 1,100 mm 114x Pallet racking beam, used Material color: yellow Box profile: 116 x 40 mm Beam type: GNA 116x40 SEG5 Hook: 5 hooks Clear span: 2,707 mm Max. load per beam pair: 2,400 kg, with evenly distributed load. 228x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams to prevent unintentional lifting 80x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 20x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 1x Load plate with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Iodpfx Ahez Ng E Uebjtn This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), mileage: 546,203 km, power: 309 kW (420.12 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 6,300 mm, Year of construction: 2016, Equipment: crane, Crane Crane length: 8.2 m Highest: ✓ Number of hydraulic extensions: 2 Number of support legs: 2 Number of extra functions: 2 Remote control: ✓ Rotator: ✓ Clamshell bucket: ✓ Meter capacity: 8,20 m Capacity kilo: 3200 kg = More information = General information Number of doors: 2 Cab: single Registration number: 2JEC711 Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Axle configuration Itjdjz I Uzaopfx Ahben Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 15.090 kg Carrying capacity: 21.910 kg GVW: 37.000 kg Max. towing weight: 42.000 kg Functional Crane: HMF 1643 Z2, year of manufacture 2015, behind the cab Tipper: Back Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, empty load weight: 9,500 kg, axle configuration: 3 axles, first registration: 08/2019, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 7,600 mm, Year of construction: 2019, Equipment: ABS, Tare weight: 9500kg, Loading area (L W H): 13.403 mm x 2.490 mm x 2.650 mmRiepu izmērs: 385/55 R22.5, Loading area volume: 88 m³, 1. ass: , 2. ass: , 3. ass: , Pneimatiskā piekare, Palešu furgons, Elektroniskā bremžu sistēma EBS, Rezerves riteņa turētājs (2x), Ferry फेरी फास्टनिंग के छल्ले, Šasija ir pieskrūvēta, 1x15- un 2x7-pin spraudnis, Āķis gaļai, Antispray, Ijdpfx Ahez Sfq Nobstn

Condition: used, This listing is for a Solentim Cell Metric Cell Imaging System The unit is in full working condition and ready for immediate use This cell imaging system is a high-quality lab instrument manufactured by Solentim (Model: Cell Metric). A high-contrast clone imaging system designed to provide accurate and consistent performance for cellular analysis and monoclonality verification. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Iodpfjzugbnox Ahbotn Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), Year of construction: 1999, Suction capacity: 1000 m³/h Maximum static pressure: 2700 Pa Electrical connection: 400 V, 1.5 kW Space requirement: 855 x 655 x 1475 mm Weight: 200 kg Itsdpfx Aoz Eq T Tshbjn

Condition: good (used), Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for installation: Number of racking rows: 1 Length per racking row: approx. 5,760 mm Number of bays / racking row: 02, each 2,700 mm Number of levels including base level: 04 Included in the scope of delivery: 03x Pallet racking uprights, used Isdpfx Ahjz Hbu Dsbjtn Material color: Sendzimir galvanized Profile dimensions: 120 x 76 x 2 mm Includes cross and diagonal bracing, upright protectors and base plates The uprights are pre-assembled (bolted framework) Height: 4,000 mm Depth: 1,100 mm 16x Pallet racking beams, used Material color: blue Box profile: 120 x 50 mm Beam type: PT120M Agraffe: 5 hooks Clear span: 2,700 mm Max. load per beam pair: 3,050 kg, with evenly distributed load 32x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 12x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 06x Shims, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2007, Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skid's own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Corvus - Year of manufacture: 2007 (filter housings 2006) - Machine type: cartridge filtration system (microfiltration), skid-mounted - Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each - Housing design ratings: max. 10 bar at up to 90 °C, max. 2 bar at 121 °C - Material: stainless steel - Overall dimensions: approx. 3,600 x 1,700 x H 3,750 mm Equipment - 4 CE-marked KHS cartridge filter housings - Pneumatically operated valve manifold with stainless steel piping Itedpsz Hb Scofx Ahben - Pressure gauges and process instrumentation - Stainless steel control cabinet with Siemens PLC and pneumatic valve terminals - Stainless steel skid frame with mesh safety guarding Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: good (used), mileage: 754,023 km, power: 338 kW (459.55 HP), first registration: 10/2005, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 7,700 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2005, Equipment: ABS, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, parking heater, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Leaf spring suspension - Brake booster - Speed limiter - Air conditioning - Air horn - Particle filter - Radio/CD player - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Power take-off (PTO) - Tow hitch = Notes = MAN TGA 26.460 Hooklift VDL 25 tons 6x4 754,023 km 2005 Full suspension Sleeper cab Auxiliary air conditioning Air conditioning Cruise control Automatic transmission Euro 3 Belgian truck Itsdpfx Ahezv D Sgobsn Chassis number: WMAH25ZZ84M380461 EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Technical information Number of cylinders: 6 Axle configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 10000 kg; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75%; Reduction: External planetary axles Rear axle 2: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 10000 kg; Tire tread depth left inner: 75%; Tire tread depth left outer: 75%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75%; Reduction: External planetary axles Weights Unladen weight: 12,260 kg Payload: 13,740 kg GVW: 26,000 kg Condition Technical condition: good Optical condition: good Further information Please contact Olivier Geerts or Edwin Geerts for more information.

Condition: as good as new (ex-display), +++++ We manufacture the original +++++ Itodpfx Ajfb R Ixehbsn Non-binding offer. Compact system LLK 246. Copper cable recycling machine. System for processing copper cable. - Consisting of a granulator, conveying fan, separation table, and extraction system. - PLC controlled. Available as a new or used system. - Ex works. General Terms and Conditions available on our website.

Year of construction: 2007, condition: good (used), Laboratory fume hood, fume hood, extraction cabinet, extraction fume hoods, fume hood system for pharmacies, chemical and medical applications, extraction system, filter system Itsdpob Uhnqefx Ahbsn -Extraction: aggressive, chemical gases -Internal dimensions: 540/850/H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Suction type: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 200 m², input voltage: 380 V, volume flow: 20,000 m³/h, total width: 2,400 mm, total length: 3,500 mm, total height: 8,500 mm, compressed air connection: 6 bar, warranty duration: 12 months, input frequency: 50 Hz, noise level: 75 dB, Equipment: documentation/manual, Dust collector – Self-cleaning filter with filter sleeves – NEW – Airflow rate: 20,000 m³/h Dimensions: approximately 3600 x 2400 x 8500 mm (height) Filter area: 200 m² Filter fabric cleaning system: reverse-flow air jet Discharge of filtered dust: motorized screw conveyor, 1.1 kW – rotary valve, 0.75 kW Explosion-proof ventilation panels: 2 Electrical control panel Electrically driven fan: 30 kW Isdpoz Nhgyjfx Ahbstn

Condition: good (used), mileage: 646,540 km, power: 353 kW (479.95 HP), first registration: 02/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 4,780 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,800 mm, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - High roof - LED lamp - Manual - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 10040 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 640 liters, Tow hitch, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling force: 393 tons, Suspension type: Full air, Cabin type: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Engine power: 353 kW (473 Hp), Engine displacement: 11120 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Rotation direction: 1x20, System length: 78 cm, System type: SDG, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, STEERABLE REAR AXLE // INTARDER // LAST AXLE STEERING // DIESEL Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 315/70R22,5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steerable; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Dual tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 4 mm; Tire tread depth right outer: 4 mm Axle 3: Lift axle; Steerable; Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 10,040 kg Payload: 15,960 kg GVW: 26,000 kg Functional Loading platform height: 109 cm Maintenance APK (technical inspection): valid until 11/2026 Iodjy Tiqxepfx Ahbjtn Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €712 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest trading • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Isdpfsx Em E Rox Ahbetn

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², total height: 2,500 mm, total length: 3,150 mm, total width: 1,030 mm, overall weight: 900 kg, Wood chip extraction system, dust extraction system, self-cleaning filter, vacuum system – Hoecker Polytechnik brand. Model: Vacumobil JT 300 – with pneumatic cleaning of filter bags using compressed air during operation. Year of manufacture: 2009 Fan power: 7.5 kW Capacity: 6,000 m3/h Filtration area: 28 m2 Air return Dust tank capacity: 495 liters Equipped with an automatic fire suppression system Iedoz Nxxaspfx Ahbotn Inlet diameter: 300 mm Stock number: 1172

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc. Isdpfxoz N R U He Ahbotn

Condition: used, For sale is a complete industrial painting station, equipped with two highly efficient pneumatic double diaphragm pumps of the GRACO Triton® 3:1 350 type. The pumps in the Triton series were specifically developed for demanding finishing applications in the metal and wood industries. Thanks to the 3:1 ratio, they generate a high material output pressure and deliver an extremely even, pulsation-free spray pattern. The stainless steel construction allows for trouble-free use with highly viscous, abrasive media, as well as water- and solvent-based paints. Iedpfx Asz Im I Sjhbjtn Technical specifications: • Manufacturer: GRACO (USA) • Pump model: Triton 3:1 350 • Number of pumps in the set: 2 • Pressure ratio: 3:1 • Max. air inlet pressure: 0.6 MPa / 6 bar (88 psi) • Max. material working pressure: 1.8 MPa / 18 bar (260 psi) • Material: Stainless steel (SST) for maximum chemical resistance • Overall dimensions of the station: 152 x 252 x H=132 cm

Condition: used, functionality: fully functional, machine/vehicle number: S/N 111000029, overall weight: 240 kg, total width: 710 mm, total length: 1,030 mm, total height: 860 mm, input voltage: 240 V, input current: 10 A, Includes lateral and vertical smoothing device. The brochure is pressed before the front trim for a sharp fold. Movable bending guides ensure flat positioning of the staple. A feed belt with a roller ensures smooth paper transport. The patented booklet folding principle guarantees exact staple positioning. Itedpjz S Hxgefx Ahben With extra-long paper output – 92 cm long. Paper format: 105 x 210 to 325 x 450 mm Block thickness: 25 sheets (80 g/m²) Staple types: Flat or ring staples Stapling heads: Up to 4 (standard 2), can be used in 4 positions Connection: 240 V, 10 A, 50 Hz, 1~ Dimensions: H x W x D, 860 x 1960 x 710 mm Weight: 240 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 113018006121, Equipment: documentation/manual, type plate available, Optical measuring system with the following objectives: 1900WD30, 800WD17, 400WD19, and 150WD11. Rotary unit with EROWA clamping system. Ring light, compatible with all objectives. Automated pick-and-place system with 24 positions, featuring the latest software packages: MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1, and Inspect 2023. 2 Inspect licenses available as floating licenses. Ijdpfx Ahezwuxajbotn Automation Manager.

Condition: new, Year of construction: 2015, Complete Knapp Fastline System RA2519 _____ Premium Conveyor Technology Available Immediately A high-quality, modular conveyor system from the Austrian intralogistics specialist KNAPP AG is for sale. The system was manufactured in 2015 as part of an automated material flow system but was never put into operation. It remains disassembled and in storage today. With a conveyor length of approximately 300 meters, numerous buffering sections, RollerDrive curves, and comprehensive original documentation, this system offers a cost-effective alternative to a new, expensive purchase. _____ The system at a glance Feature Description Manufacturer KNAPP AG System Fastline Year built 2015 Conveyor Length approx. 300 m Roller Width 450 mm Accumulation space 720 mm Conveyor speed 0,75 m/s RollerDrive curves 11 units Interroll DriveControls 277 units available _____ High-quality industrial design The KNAPP Fastline series is one of the proven modular conveyor systems for automated material flows. The system was developed for the continuous transport of cartons and containers and is suitable for use in: • Distribution centers • Shipping logistics • Production logistics • E-commerce • Replacement or expansion of existing conveyor systems Thanks to its modular design, individual conveyor sections can be used just as easily as complete system components. _____ Scope of Delivery The scope of delivery includes, among other things: Conveyor Technology • Approx. 300 meters of roller conveyor systems • Accumulation roller conveyors • Drive roller conveyors • Conveyor modules of various lengths • Conveyor curves Curves • 11 RollerDrive curves Drive Technology • 277 Interroll DriveControls EC310 Steel Structures • Extensive support columns • Column bases • Connecting elements Pneumatics • Pneumatically controlled accumulation stations • Pneumatic assemblies • Sensors Documentation • Original KNAPP parts lists • Transport and package lists • Documentation of the main assemblies _____ Technical Concept The system is based on the modular KNAPP Fastline system. The material being conveyed is transported on roller conveyors. The storage bins are pneumatically controlled. Thanks to the modular design, conveyor routes can be easily extended or adapted to new warehouse layouts. A key advantage is the use of commercially available industrial components, ensuring that replacement parts will remain available in the future. _____ Premium Manufacturer Itedszwylrjpfx Ahbsn KNAPP is one of the world\'s leading manufacturers of automated material flow systems. The system is not a custom-built or specially designed solution, but rather based on an industrial mass-production platform. _____

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time Itsdpjz Izrfjfx Ahbon * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar Itsdoz Iz Sfepfx Ahbjn

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Iodpfoz Iql Iox Ahbstn Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1998, Extraction system Manufacturer: Schuko Type: Vacomat 200 Year of manufacture: 1998 Volume flow rate: max. 2,950 m³/h Negative pressure: 2,200 Pa Itsdpfxjz Iq H Es Ahbjn Power: 3.7 kW Extraction nozzle diameter: 200 mm Cleaning: mechanical