Used Smoke Extractor for sale (2,064)

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Ksdpoxnqaujfx Affenf Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Knedpfxoxnlwzj Affef Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: good (used), functionality: fully functional, suction capacity: 7,500 m³/h, 3-bag sawdust extractor MAPELLI 5.5 kW Specification: • Condition - used, after inspection • Manufacturer - MAPELLI • Turbine motor power - 5.5 kW • Bag shaking mechanism • Turbine inlet - Ø350 mm • Filter surface area: 30 filter bags 20x120 cm • Capacity - approx. 8,500 m3/h • Airtight body with warm air return • Warm air return diameter - Ø500 mm • Collection bag diameter - 3 x 600 mm • Overall dimensions - 380/285 x 105 x 340 cm (length/length without turbine x width x height) • Transport height - 275 cm Additional information: • Good factory technical condition • The photos show the actual condition of the item for sale Ksdpfxew Av Amj Affjnf • Possibility to connect and test the device on site

Year of construction: 1997, condition: good (used), functionality: fully functional, MOTAN dry air dryer Model MDE 40 Power 1.3 kW MOTAN granulate container Knjdpfx Afexr Acvefef Model BE 60 Ltr. Additional heater Power 1.55 kW MOTAN material conveying unit Model HLS-02-1-A-000-0 This system has been tested for all functions and operates flawlessly!

Condition: new, functionality: fully functional, Year of construction: 2025, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Knsdpfxoxrdhao Affjf Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 2800 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: ready for operation (used), Dust and mist extractor DeWalt model DW60 Kodjxdwn Djpfx Affsnf

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Knodpoxnprcefx Affsf Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Kodjw Avl Uopfx Affonf

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Kedpexh Ammofx Affjnf Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h Knjdexg Nx Tepfx Affof — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Specification: • Condition – used, after inspection • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism • Turbine inlet – dia. 160 mm • One collection bin for dust/chips • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale Knedpoxph Dasfx Affjf • Possibility to switch on and test the device on site

Condition: good (used), Year of construction: 2019, Mist extractor Kedotu Uxrjpfx Affenf

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm Kjdpfep A A Saox Affjnf -Weight: 30 kg/piece

Condition: good (used), Motor : 1.5 kW Knjdpjhc Sypofx Affef Quantity : 2 pieces Price/ piece

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Manufacturer: Dongguan Jieba Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Knsdpfxsxfkuyo Affjf Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more Knedpsxg Ickefx Affof High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: ready for operation (used), functionality: fully functional, filter area: 2.2 m², volume flow: 3,000 m³/h, Sawdust extractor 1 bag Alfa Rimini Specification: • condition - used • manufacturer - Alfa Rimini • model - Alfa 1 • turbine engine power - 1.5 kW (single-phase, 220V) • turbine inlet - fi 160 mm • collection bag diameter - 1 x fi 500 mm Knsdpfx Afevuhqnsfjf • 1 filter bag with dimensions - 500 x 1250 mm (2.2 m2) • efficiency - 3,000 m3/h • year of manufacture - 2000 • dimensions 110 x 720 x 260 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Kjdpfx Afeumm Npofjnf

Condition: like new (used), functionality: fully functional, machine/vehicle number: CS1, GEWA Chio vacuum CS1. The new price was €1,750. Kedpfx Asxiv Ereffsnf

Condition: used, functionality: fully functional, Inlet diameter: 38cm * Production may vary depending on the product. * Maximum capacity from 1 to 200 t/h *Hot extraction * Tomato extraction * Fruit and vegetable extraction * Alveolar and hypo-cycloidal rotor Knsdpfxswnx Txe Affjf Final product: * Tomato puree * Fruit puree * Vegetable puree

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Knodpfjv T Db Tjx Affsf Connection: 100 mm #8347

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043 Kjdpjxd Ry Hjfx Affonf

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area Kodexaal Ropfx Affenf - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: used, Extraction capacity of the unit: 182 m³/h with 5 m air hose 45 Ø: 159 m³/h Filter surface: 9,6 m² electr. connection: alternating current 220 V weight: 20 kg Ksdpfx Afob Nv S Ejfjnf Space requirement: 850 x 330 x 450 mm

Year of construction: 1991, condition: ready for operation (used), machine/vehicle number: 004744, extraction capacity: 1200 m³ / h drive: 0.75 kW Knjdpfxjfm Ekxj Affjf space requirement: 700 x 660 x 1030 mm