Used Silo System for sale (40,808)

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Crsdpfx Aezy Hrksiiji Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg.

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation Csdov Da Dlopfx Aiieri - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Cedpfx Aiowufb Aeiori Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Ready to ship worldwide

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer – Rental Possible Type: CR 60 Chassis: Two fully automatically welded I-beam longitudinal girders with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brake 22.5" SAF axle units, 3x 9t with air suspension. Axle spacing is 2 x 1,310 mm, lifting and lowering valve, load indicator on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without steering gear, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice on Alcoa Dura Bright aluminum rims, 11.75 x 22.5, ET 120 Braking System: EBS 4S/2M WABCO air braking system with RSS, according to standard 98/12/CE - ECE R13/09, brake pad wear indicator connected Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swivel foot, rear with crank supports Electrical System: All lights in LED design, 24-volt electrical system consisting of: one 15-pole socket in front of the fifth wheel mounted on the chassis carrier, yellow side marker lights in the prescribed number, position lights at the rear, outline lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber lights at the rear at the level of the turntable mounted on aluminum brackets according to standard 97/28/CE-2007/35/CE, 1 LED work light on the container, yellow warning light at the rear, at the level of the hose pipes, 2 reversing lights in the underrun protection, 2 reversing lights at the level of the supports (each can be switched off on the power console) Container Design: A horizontal container made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), a 1-chamber container, with a volume of 60,000 liters. Warranty for the container: 24 months from delivery Operating Parameters: Pressure vessel according to standard Pressure Equipment Directive PED 97/23/CE. Wall thickness is approx. 5 mm, test overpressure 3.0 bar - operating overpressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding dome lids. The dome lids are sealed with 4 wing nuts each, rubber support for the dome lid on top for storage, closed rain strip at the front - open at the rear Material Outlet: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for loosening, material outlet cone can be pivoted to the side, shut-off valve DN 150, with white seal, connection: STORZ-A Crjdpfxey Ii Dzs Aiioi Air Piping: One 2.5" stainless steel air collector line mounted on the operating side RIGHT, a stainless steel air distribution pipe 4" is mounted at the rear of the container, air valves (shut-off valves) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve at the top of the container, 1 vibrator 1m in front of the turntable Ladder and Walkway: 1 aluminum ladder is mounted at the rear left of the vehicle, 1 aluminum safety handrail with a separate folding ladder section can be erected from below with a locking brake when opened, 1 aluminum safety walkway runs along the top left of the container, anti-slip coating on the container Hose Reel: 4 hose reel containers 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum.

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Rental Possible Type: CR 47 Chassis: Two fully automatically welded I-beams with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brake 22.5", SAF axle units 3x 9t with air suspension. Axle spacing is 2 x 1310 mm. Lifting and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system. 1st axle is liftable without an air suspension module (SZM). 3rd axle is liftable with Wabco Optiturn. Rims and Tires: 6 wheels with tires size 385/65 R22.5, according to manufacturer's choice, on Alcoa Dura Bright aluminum rims 11.75 x 22.5 ET 120 Braking System: EBS 4S/2M WABCO air brake system with RSS, in accordance with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swivel foot at the rear, without support. Electrical System: All lights in LED design. 24-volt electrical system consisting of: One 15-pole socket mounted in front of the fifth-wheel plate on the chassis beam, yellow side marker lights in the required number, position lights at the rear, outline lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE. 2 multi-chamber lights at the rear at the height of the swivel bearing, mounted on aluminum brackets according to standard 97/28/CE-2007/35/CE. 1 LED work light on the container, yellow warning light at the rear, mounted at the height of the hose pipes. 2 reversing lights in the underrun protection, 2 reversing lights at the height of the supports (each can be switched off on the power console). Container Design: One horizontal container made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment container, with 47,000 liters volume. Container warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness is approximately 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80°. Filling Options: 4 manholes DN 450 with pivoting and folding dome covers. The dome covers are sealed with 4 wing nuts each. Rubber support for dome covers at the top for storage, closed front rain strip, open rear. Material Outlet: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for loosening. Material outlet cone can be pivoted to the side. Shut-off valve DN 150, with white seal. Connection: STORZ-A. Air Piping: One 2.5" stainless steel air collector line mounted on the right-hand operating side. One stainless steel air distribution pipe 4" is mounted at the rear of the container. Air valves (shut-off valves) in INOX. Upper air hose and air connection hoses are in 2" STORZ couplings. Micron filter, vacuum valve at the top of the container, 1 vibrator 1m in front of the swivel bearing. Ladder and Walkway: 1 aluminum ladder is mounted on the left-hand rear side of the vehicle. 1 aluminum safety scissor guard can be erected from below with a separate ladder flap and a locking brake when opened. 1 aluminum safety grating runs along the top of the container on the left side. Anti-slip coating on the container. Hose Storage: 4 hose pipe containers 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings. Hose containers with compressor hose D.76. Crsdpfx Aox Nufmoiiji Accessories: The side underrun protectio

Condition: excellent (used), functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg Crjdo Ah Rxcjpfx Aiiei EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Crodsy Ryhvepfx Aiisi Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer – Rental Available Type: CM 35 Axles and Suspension: Disc brake 22.5" SAF axle assemblies, 3 x 9 tons with air suspension. Axle spacing: 2 x 1310 mm. Lift and lower valve. Load indicator on top of the tank. Wabco Smartboard, Wabco tire pressure monitoring system. 1st axle: Liftable, without air suspension control module. 3rd axle: Liftable with Wabco Optiturn. Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer's choice, on Alcoa Ultra One aluminum rims, 11.75 x 22.5, ET 120. Braking System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, connected brake wear indicator. Landing Gear: Mechanical landing gear with two speeds, 2 x 20 tons support load with swivel foot. Electrical System: All lights in LED design, 24-volt electrical system consisting of: One 15-pole socket mounted in front of the kingpin on the chassis support, yellow side marker lights in the required number, position lights at the rear, clearance lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber lights at the rear at the level of the swivel plate mounted on aluminum consoles according to standard 97/28/CE-2007/35/CE. 2 swivel LED work lights on the upper left and right side of the tank, yellow warning light at the rear, mounted at the height of the hose pipes, 2 reversing lights in the underride protection, 2 reversing lights at the height of the supports (each can be switched off on the power console). Tank Design: One horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-chamber tank, with 35,000 liters volume. Tank warranty: 24 months from delivery. Kingpin 2" according to standard 94/20/CE. Operating Parameters: Pressure vessel according to standard Pressure Equipment Directive PED 97/23/CE. Wall thickness is approximately 5 mm. Test overpressure 3.0 bar – operating overpressure 2.0 bar, operating temperature -40° to +80°. Filling Options: 3 manholes DN 450 with swivel and folding dome covers. The dome covers are sealed with 4 wing nuts each. Support for dome covers at the top for storage. Front rain flap closed, rear open. Crsdpfsx Nuf Hex Aiioi Material Outlet: 2 material outlet cones with synthetic fabric as loosening insert. Individual discharge lines DN 100 made of steel, combined at the rear. 2 pinch valves DN 100 AKO in the lines, shut-off ball valve DN 100 with ring nozzle. Remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: One 2.5" stainless steel air collecting line mounted on the operating side RIGHT. The air line is routed to the front, to the end of the silo with check valve and connecting hose DN 65 for compressor with Storz-B coupling. The air collecting line has ball valves for upper air, additional air and loosening. Upper air 2" at the rear right, PRESSURE LINE INLET AT THE REAR RIGHT, external air connection Storz C on the air line pipe at the rear RIGHT, pneumatic connection with blow-off gun and spiral hose at the top on the walkway in the area of the ladder, 1 vibrator on top of the tank. Air line at the top in the middle of the walkway for cleaning with a gun. Air line at the bottom in the storage box for cleaning with a gun. Ladder and Walkway: 1 aluminum ladder is mounted at the rear left of the vehicle. 1 pneumatic aluminum safety guardrail with locking system acting on the brake. 1 aluminum.

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,200 mm, loading space width: 2,500 mm, loading space height: 1,500 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Equipment: crane, Tyre size: 385/65R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Empty weight: 14.070 kg Carrying capacity: 27.930 kg Crodpfeuc D Uaex Aiiei GVW: 42.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 24001

Condition: ready for operation (used), Year of construction: 2004, I sell the 3-side brushing machine Quickwood CD2-1300, Year 2004. 2 pcs. Surface brushes from top Credpfx Aovylmqsiioi 2 pcs. Side brushes Working width 1300mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy With full Documentation. Available immediately.

Condition: used, axle configuration: 2 axles, first registration: 04/2016, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: tail-lift, General information Year of manufacture: 2016 Axle configuration Tire size: 385/65 R22.5 Crsdjzxlkiopfx Aiiji Axle brand: BPW Brakes: Disc brakes Rear axle 1: Lift axle; Tire tread depth left: 2 mm; Tire tread depth right: 8 mm; Suspension: Air suspension Rear axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 2 mm Weights Unladen weight: 9,350 kg Payload: 23,650 kg GVW: 33,000 kg Functional features Tail lift: Dhollandia DHLM.30, 3,000 kg Condition Damage: None

Year of construction: 1994, condition: excellent (used), For sale are 2 units of coal dust silos. Capacity: 120 m³ per unit. Silo material: S235 Discharge cone material: Stainless steel, from Ø 250mm to Ø 1450 mm. Diameter: 3.40 meters. Silo height: 20.6 meters. Total height: 24 meters. Weight: 22 tons. Explosion vent: DN 1300. Implosion vents: 2x DN 500. Silo filter: Ø900mm Infra Jet AJP 304 (30m²). Filling line: DN100. Discharge cone: 70°. Air fluidization with 6 nozzles. Level measurement: Endress Hauser Soliphant. Discharge/dosing with dense-phase conveying. Manufacturer: Altmayer Airdos PDF 800. Codpfxsh Dix Is Aiieri Rotary airlock: DN 250, manufacturer Kreisel. Dismantling has already been carried out; the silos are stored and immediately available.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = General information Year of construction: 2007 Registration number: OK-21-BL Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Cjdpoz Smtxofx Aiisri Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg GVW: 42.000 kg

Condition: used, Year of construction: 2022, machine/vehicle number: .35.12.113.22, Dust extraction system FELDER RL 350, 2022. Credpfo Aibqhjx Aiioi

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg Crsdpfozty Rmox Aiisi More technical information can be found attached as Tech. data file 4 units in stock In very good and clean condition As is Available immediately

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. Credsz Slmdspfx Aiioi The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: used, Year of construction: 2012, machine/vehicle number: 02 13 2202, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, volume flow: 16,000 m³/h, suction capacity: 16,000 m³/h, actuation type: electric, Equipment: CE marking, documentation/manual, Industrial dust extraction and filtration system, built in 2012 by the Italian company SILVI & C. S.r.l. The system is complete with a 22 kW fan, cartridge filtration system, automatic filter cleaning using compressed air, control panel, and STS CO₂ fire suppression system. Technical specifications: Manufacturer: SILVI & C. S.r.l. – Italy Year of manufacture: 2012 Serial number: 02 13 2202 Codpe Ahrk Nefx Aiijri Airflow rate: 16,000 m³/h Static pressure: 350 mm H₂O (approximately 3,430 Pa) Electrical power: 22 kW ATEX classification: II 3D – Zone 22 – T 150 °C CE marking Electrical supply: 400 V Equipment: 22 kW industrial fan Cartridge filtration system Automatic compressed air filter cleaning system TURBO electronic control unit for filter cleaning management Main electrical panel with controls and protections STS CO₂ fire suppression system Two lower containers for dust collection Inspection and maintenance access doors Condition: Used system, functional and complete with fan. Machine manual and electrical diagram dated December 2012 are available. Further information and photographs available upon request. Transportation not included. Any dismantling and loading operations will be agreed upon separately.

Condition: used, axle configuration: 3 axles, first registration: 07/2013, loading space length: 10,250 mm, loading space width: 2,450 mm, total length: 11,700 mm, total height: 1,600 mm, color: other, Year of construction: 2013, = Additional options and accessories = - Steering Axle = More information = Axle configuration Rear axle 1: Lift axle Rear axle 2: Steering Weights Empty weight: 8.000 kg Carrying capacity: 34.000 kg GVW: 42.000 kg Functional Height of cargo floor: 160 cm Condition General condition: average Technical condition: average Visual appearance: average Identification Registration number: QAQU503 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Crsdpoyzt Siofx Aiioi Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts Crsdpfx Ae Ah Hvleiisi -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar -Connection power angle sealing machine: approx. 4 kW Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. Cjdpfxez Smtrj Aiieri ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: Credpfxeyxxxvo Aiiei - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Cedoq T N T Topfx Aiieri Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: used, maximum load weight: 12,730 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 39 m³, total length: 9,500 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, tail-lift, Vehicle No. for customer inquiries: 185 ----Additional features * BÖSE beverage body with LBW (welded body) * Rear view camera * Air suspension * Loading board Bär 2,000 kg * Cargo area dimensions: L: 7,300mm W: 2,480mm H: 2,200mm * Front wall height: 2,100mm * Side wall that can be folded open on both sides * Turntable * Air brake ----Special features * Base color: black * ABS, EBS * Axles: 2x SAF * Ready for operation * Air connections: Duomatik * Electrical connections: 15-pin * Other connections: Camera ----Technical data: * HSN/TSN: 9837/000 * Suspension: Air * Cargo area dimensions: L: 7,300mm W: 2,480mm H: 2,200mm * Front wall height: 2,100mm * Side board: 900mm Crsdpfx Aiez Ifaasioi * Payload: 12,730kg * Tire size: 385/65 R22.5 * Tire tread: approx. 30% - 70% * Winter tires ----German vehicle! * €8,850 net plus VAT * A deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information provided does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typographical errors, errors and prior sale * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to commercial enterprises or dealers. Thank you very much. * We speak: * English - Greek / Miláme Elliniká Tel:+49.171.2776449 * Russian / My govorim na Russkom Tel:+49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-Mail: * * Internal number: 185

Condition: excellent (used), I am offering for sale a professional HBM MGCplus measuring system from Hottinger Baldwin Messtechnik (HBM). This is a high-end, modular measuring amplifier used in research laboratories, industry, and testing stations for signal acquisition and analysis from sensors. The device is equipped with a control panel with an LCD display and installed measuring modules. The unit being sold was removed from an industrial installation. Crsdpfxez Snq Rs Aiioi Specifications: • Manufacturer: HBM – Hottinger Baldwin Messtechnik • Model: MGCplus • Control unit: AB22A • Installed modules: ML60B BL01 (2 units) AP17 SY03 • Power supply: 115–230 V AC, 50–60 Hz • Maximum power consumption: 300 VA Condition: • Used. • Visual condition as shown in the photos – normal signs of use.

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Used aseptic line for Tetra Pak fino 1 L - 3600 PPHTechnical Specifications & Performance DataThis complete Tetra Pak Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling.Production speed: up to 3,600 packages/hourContainer type: Carton-based aseptic packages (Tetra Fino Aseptic family)Supported volumes: 1.0LPrimary product currently run: MilkMain filler year: 2006Additional module: SOCO System unit, year 2014Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyorAdvanced Automation & Control SystemsThe line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments.Production Line Integration CapabilitiesThis used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations.Machine Condition & Maintenance HistoryThe equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment.Operational Performance & VersatilityOptimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics.Installation Requirements & Site PreparationThe system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environment ... Crodpfx Aijyh E Apoiei