Used Shredder Tracked Vehicle for sale (33,891)

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck. ©farmpartner-tec GmbH: UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader Kdjdpfx Ajyq Ar Aobfon STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreaders) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Gr.2(M) R=Gr.3 Control system Evolution Professional "EP", including electronic spreader pattern adjustment Premium spreading disc "490" (spreading width 2 - 10 m) Ball-point frame for Unimog 405.125 Support legs (4 pcs.), 3 t, crank drive in the center, including lateral supports Rotating beacon (1 piece) Warning film red-white, at the top of the container Marking "Winter Service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Flow measurement with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: used, Year of construction: 2015, _____The ECO IceFighter consists of a stainless steel frame, a tank made of special plastic, a dry-running and brine-proof piston diaphragm pump with OFF/ON switch and plugs, a proportional control valve for regulating the spray volume with 3 electrically switchable zone valves, pressure gauge, shut-off valve, a spray tube with 3 types of stainless steel spray nozzles and the necessary filters to prevent the nozzles from clogging. SB8 spray bar - 3 zones - spraying width 3.0 mtr- drive with hydraulic motor for oil volume up to 60 l/min- automatic refuelling - when the maximum level is reached, the refuelling process is automatically switched off (must be prepared in the brine preparation - the signal comes from the brine preparation) with standardized 4-pin plug- C-filler neck + stainless steel overflow (except C-coupling) Large overflow incl. shut-off valve for shutting off. Shut-off valve for shutting off after the filling process, storage location: 54595 Prüm Kedpfogqz A Rex Abfjdn

Condition: used, functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 760 mm, Untha RS 40 shredder Power: 2 x 18.5 kW Electrical cabinet: Siemens Simatic Chamber dimensions: 700 x 760 mm Screens. Hopper. Weight: approx. 2100 kg New oil. Machine in fully working order. Price upon request. Kdjdpfx Abozdldgsfen More photos and a video of the machine in operation available upon request. More information available by phone.

Condition: used, mileage: 187,204 km, power: 340 kW (462.27 HP), first registration: 11/2005, fuel type: diesel, empty load weight: 9,100 kg, maximum load weight: 8,900 kg, overall weight: 40,000 kg, tire size: 315 / 80 R 22.5 / 11mm, axle configuration: 4x2, next inspection (TÜV): 10/2024, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 315 / 80 R 22.5 / 11mm, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Kdedpfx Abszdkc Uefsn Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Kdodpfxsxx Tfzs Abfon Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, functionality: fully functional, first registration: 06/2026, fuel type: diesel, color: orange, driver cabin: day cab, gearing type: automatic, Year of construction: 2013, operating hours: 1,223 h, Equipment: additional headlights, air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Drive 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four preselectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater High roof Heat-shielding glazing and side sliding windows Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sun protection film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Other equipment Subframe for tool-free change of platforms and equipment Locking rail in the front for adjusting the upper link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, loudspeaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage incl. pull-in hook CAT II / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm in front Hydraulic flow divider 1 Flow divider, circuit 1 adjustable from 0–25 l/min with line set to front and rear Return flow front and rear Hydr. kit, implement adjustment pump Implement adjustment pump 0–80 l/min, variable Line set to front and rear Return flow front and rear Leakage oil line front and rear Hydraulic tilting mechanism for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings Ksdozdizvopfx Abfjdn 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction control switch and speed regulator Electro-hydraulic implement relief Conversion kit, wider fenders Comfort package Driver's seat with air suspension, armrest, air conditioning Hydr. tilting mechanism for cab Winter package = Mirror and windshield heating, engine preheater 2 work lights in the front 2 work lights in the rear Ball hitch, permanently mounted The following options are available at an extra charge: 1. PRICE INCREASE PLATFORM DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed € 2,750,- plus VAT 2. PRICE INCREASE TOWING HITCH, NON-AUTOMATIC HEIGHT ADJUSTABLE - DEMO UNIT € 470,- plus VAT Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty.

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - Power output: 450 kW DC - with ABB frequency inverter including DTC control - Bevel-spur gear - roller speed up to approx. 32 rpm / variable via belt drive and frequency inverter control. - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Stepless speed control - Tooth type: Form C3 trapezoidal tooth, 174 mm - Armor plates as wear protection on the roller - Hydraulically adjustable counter comb - cutting gap adjustment on the display - 4 comb cylinders - Central lubrication - Hydraulically opening comb flap - Pre-assembled main control cabinet - On-site operating unit on the machine - Start-up warning - Motor compartment lighting - Paint finish: RAL 2011 traffic orange The machine has the following additional equipment: - Guide rail limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine stand, height 1,200 mm - Hopper attachment, 3-sided, left or right - Flashing light module - Solenoid valve for spraying system with water - Radio remote control (EU) - Profibus integration - 2 additional power outlets on the control cabinet, up to 7.5 kW - Control cabinet container / air-conditioned, LxWxH 5,000 x 2,400 x 2,600 mm Kedpfx Aex I A Akjbfodn - Lower conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Upon request, the machine can undergo extensive refurbishment at our factory. Other: - Display in German, English possible - Stickers and labeling on the control panel in German, English possible - Warning stickers in German, English possible - Operating manual in German (paper and digital) (optional for local translation)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, power: 2 kW (2.72 HP), rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job Kdedjzdf Ruopfx Abfjn - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, mileage: 374,422 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,330 mm, first registration: 10/2018, loading space length: 4,750 mm, loading space width: 2,060 mm, emission class: euro6, color: silver, driver cabin: day cab, suspension: other, tire size: 195/75R16, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, traction control, trailer coupling, = Additional options and equipment = - Bluetooth - Electric windows - Electric mirrors - Tachograph (control device) - Halogen lamp - None - Manual - Radio/Cassette - Fabric upholstery - Winch = Notes = Configuration: 4x2, twin rear wheels, payload: 1,010 kg, unladen weight: 2,490 kg, gross weight: 3,500 kg, trailer load (unbraked): 750 kg, centre axle trailer load (braked): 3,500 kg, tow bar, winch, cab type: single cab, cruise control, tachograph (control device), air conditioning, number of airbags: 1, parking aid: none, electric windows, electric mirrors, radio/cassette, GPS navigation, colour: silver, metallic, lighting type: halogen lamp, air conditioning, Bluetooth, hazard warning lights, engine power: 120 kW (161 Hp), fuel: diesel, Euro 6, drive technology: timing chain, transmission: manual gearbox, gears: 6, power steering, ABS, ASR, starter battery, roof rack: none, central locking, seats: 3, seating configuration: 1+2, seat cover: fabric, seat adjustment: manual, recovery vehicle, TIJHOF, very complete, from LIER, ECC, navi, etc., tire type: summer tires = Further information = Transmission Gearbox: 6-speed manual transmission Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: left tire tread: 6 mm; right tire tread: 6 mm; suspension: coil spring Axle 2: twin tires; left inner tire tread: 2 mm; left outer tire tread: 2 mm; right inner tire tread: 2 mm; right outer tire tread: 1 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 790 x 210 x 237 cm Weights Unladen weight: 2,490 kg Payload: 1,010 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 65 cm Maintenance Kjdey Hqfwjpfx Abfsdn APK (periodic technical inspection): valid until 01.2027 Condition General condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 Identification Registration number: V-175-SK

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Kdodpfxswtmw Ae Abfsn Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: excellent (used), Year of construction: 2006, Specifications : Overall Length 54' 6" travel, 64' 10" operation Height 13' 2" Width 10' 10" Kedpjxd D Nhefx Abfsdn Weight 94,000–108,000 pounds Top Feed Roll Motor - High-torque Poclain Bottom Feed Roll Motor - High-torque Brevini planetary with Char-Lynn hydraulic motor Feed Conveyor - 440 belt or chain Length - 16' standard; 20' optional Width - 60" Motor - High-torque Brevini planetary with Char-Lynn hydraulic motor Discharge Conveyor Length - 50' 0" Width - 60" Discharge height - 17' Motor - High-torque Char-Lynn Engine Standard: CAT C-27, 1050 hp; PT Tech HPTO 15 clutch Option: CAT C-32,1200 hp; PT Tech HPTO 21 clutch Drive V-belt complete; 12-14-groove, 8-V banded belts with guard Flexaire Fan Reversing pitch radiator fan that reverses airflow every 5-15 minutes automatically (adjustable)

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Kedpfx Aboyzfigefsdn Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : - Input transporter 10 m - Metal detector - Cheaper - Output transporter - El. Cabinet - Comand pult

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Kodpfxop H Sv Do Abfodn 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: excellent (used), color: black, Year of construction: 2021, operating hours: 42 h, Empty weight: 340 kg Lifting capacity: 1.200 kg Dimensions of cargo space: 120 x 75 x 50 cm CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: UK Please contact Vink Machinery for more information Tracked Carrier Kdedpsy I T Ttofx Abfon * 2021 * 42 working hours * Battery drive * With detachable glass rack * 360-degree turntable * Remote Control * One-hand operated * 1200 kg lifting capacity * 340 kg own weight

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: KA - 9,5 1000Kg, ABUS crane system, crane, bridge crane, workshop crane Crane available in a quantity of 2!!! Load capacity / lifting capacity: 1 ton - 1000 kg Track gauge: 9550 mm, overall dimensions approx. 9700 mm Year of manufacture: 1990, with floor-mounted control Abus GM chain hoist, 1000 kg, lifting height 3 m Overall height from the top of the crane to the hook: approx. 650 mm Head beam length with buffer: approx. 200 cm Kedpszdbyfefx Abfodn Optionally, 2 x 17 m HEA200 runway rails and the corresponding power rail are also available. The crane is disassembled and immediately available. Very good condition, inspection record is available. We also have pillar-mounted jib cranes and wall-mounted jib cranes. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire with your postal code. Collection is preferred.

Condition: used, Year of construction: 2015, operating hours: 9,583 h, 2015 | Caterpillar 314E LCR with 1 excavator bucket | Used Tracked Excavator | 9583 hours Kedsyyp Taepfx Abfsdn 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 48800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 56 approved ✅ 11 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator, drivetrain a bit noisy, installed Cat product link system, camera and Oilquick quick coupler, 1 bucket , hydraulic oil level a bit low, good engine performance , autolube leaks a bit from hose, small play on swing drive as well as pins of the boom and the blade cylinders 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40585 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2013, operating hours: 10,349 h, 2013 | Volvo EC220DL with 1 excavator bucket | Used Tracked Excavator | 10349 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 44900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 65 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator for its hours, a little bit water is in the transfer case of the swing motor (water went trough the dipstick cover) but there is no major issue with this. There is a little difference in travel speed between the two drive motors in fast travel mode (left driver motor is a little slower). Generally a nice machine! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40584 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kjdpfx Absyyww Hsfodn 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Kdedpsyyhqdefx Abfon

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, original vehicle papers. Kdodoy Duuwjpfx Abfsn Service was done. New tyres in April 2026. In very good and working condition.

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Kdodpfsyuvr Rox Abfen Including control cabinet

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Foldable discharge conveyor, overband magnet, radio remote control. Service new in February 2026. Kdjdpjydmgdsfx Abfjn

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional options and accessories = - Remote central locking - Lift axle - Air suspension - Pintle hook - Sun visor - Spotlights = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Kedpfezc Rhcex Abfedn Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Ksdpfxszc I S Ej Abfsdn Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. If you have any further questions or require additional information, please send us a message or call.

Condition: used, mileage: 78,786 km, power: 250 kW (339.91 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 7,040 kg, maximum load weight: 10,960 kg, tire size: 315 / 60 R 22.5 / 6mm, axle configuration: 4x2, next inspection (TÜV): 01/2024, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total width: 25,500 mm, front tire size: 315 / 60 R 22.5 / 6mm, operation weight: 18,000 kg, Equipment: air conditioning,