Used Shredder Tracked Vehicle for sale (32,535)

Condition: like new (used), functionality: fully functional, power: 23.17 kW (31.50 HP), overall weight: 1,630 kg, fuel type: diesel, fuel: diesel, wheelbase: 1,680 mm, Year of construction: 2003, operating hours: 3,527 h, machine/vehicle number: 10309448, Cemetery Excavator - Fully Overhauled!!! REFORM BOKI COMPACT EXCAVATOR 2551E - USED EQUIPMENT CHASSIS NO. 1039448, CURRENTLY WITH 3527 OPERATING HOURS Fully Overhauled: - Thoroughly cleaned - Cabin repainted - Support feet repainted - New grapple shells - Service performed: oils, filters, etc. - UVV inspection passed Standard Equipment: - Three-wheel excavator with side steering - Sound dampened - Outside width adjustable from 0.83 to 1.25m - Speed of 0-6km/h adjustable purely mechanically on the drawbar - UVV approved - GS mark "tested safety" Engine: - With water-cooled 4-cylinder diesel engine - 23.2kW / 31.5 HP at 3,000 rpm according to DIN 70020 - Displacement 1,335ccm Electrical System: - Alternator 14V / 35A - Battery 12V / 63 Ah - Work lights Drive System: - Hydrostatic all-wheel drive via wheel hub motors - BOKILOCK DIFFERENTIAL LOCK SYSTEM - Activated from the drawbar and can be switched during operation - Infinitely variable adjustment of the driving speed on the drawbar 0-6 km/h - Mechanical start-up protection on the drawbar - Sensored front axle for automatic activation of the boom safety function Chassis: - Torsionally rigid frame made of fine-grained steel Steering: - The spur gear is actuated via the steering drawbar Brakes: - Service brake via the hydrostatic drive Tires: - 18 x 9.50 - 8 (lawn tread) Hydraulics: - 2-lever joystick control on an adjustable control unit - No visual obstruction due to control elements - Pilot-operated hydraulic valves - All functions are controlled proportionally - Two-circuit hydraulics - Hydraulic tank: 40 ltr., operating pressure: 180bar - Biologically rapidly biodegradable hydraulic fluid - Based on Poly-Alpha-Olefins (PAO) - Currently, the oil change interval is 4,000 operating hours - (Water hazard class 1) Djdpj Ahyf Uofx Alfowd Swivel Gear: - Superstructure rotates endlessly on an internally toothed slewing ring - Locking via locking pin in the cabin Excavator Structure: - Reinforced boom and excavator arm made of hot-rolled MSH profiles - Outreach 3,750mm from the outside edge of the base frame - Automatic detection of the operating status activates the "boom push" function when the device is supported (this allows the pressure on the earth grab to be significantly increased under heavy ground conditions) - Lifting force: 830 kp at 3,000mm - Load holding valve, pre-tensioning valve and hose rupture protection - 4 two-piece, hydraulic supports, play-free horizontal locking by means of forged toothed washers (unlimited adjustment possibilities) - Support cylinders with integrated hose rupture protection (no risk of sinking in the event of any external damage to the hydraulic lines) - Support plates with 2 insert claws Grab Bucket: - Earth grab / two-shell grab with integrated, central closing cylinder, grab rotation device approx. 210° - Dimensions: 750 x 830 mm standard Half Cabin: - Completely lockable with side window, optimal view of the working area thanks to glazing that reaches down to the ground - Windshield can be opened - Entry-side curtain with window - Foldable footrest - Weatherproof, sprung and hydraulically dampened driver's seat - Hot water blower heater Dimensions and Weight: - Length / transport position: 3,600mm - Width: 830mm - Height: 2,115mm - Track min: 830mm - Track max: 1,250mm - Weight: 1,630kg - Wheelbase: 1,680mm - Turning radius: 1780mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm Dwodjvx Hkzspfx Alfsd • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: excellent (used), CATALOGUE NUMBER 8148 Technical data: - inlet width 310mm - inlet height 90mm - shaft width 330mm - blade length 330mm - number of blades 2 pcs - screen dimensions 15x15mm - toothed draw roller, bottom - bottom shaft motor 0.55kW - toothed draw roller, top - top shaft motor 0.55kW - infeed belt length 1600mm - infeed belt width 310mm - main motor 22kW - auto-reverse (adjustable) - extraction nozzle diameter 210mm - machine dimensions with feeder (length/width/height) 3000x1500x950mm - weight approximately 1200kg ADVANTAGES – German-made – with belt feeder – auto-reverse (adjustable) – used shredder, very good condition Dsdpfxs Ait Syo Alfowd Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: used, empty load weight: 2,800 kg, maximum load weight: 9,200 kg, overall weight: 12,000 kg, first registration: 08/1995, total width: 2,550 mm, Equipment: ABS, EBS, electronic stability program (ESP), Key Features Internal Reference: 25494M Chassis Number: 38347 Serial Number: 925.237.450 Vehicle Model: TS12 13800 L / Swiss-Vehicle Vehicle Make: Lanz-Marti Product Category: Tank body Used / New / Demo: Used Dwodpez Hp Eksfx Alfod Date of First Registration: 08/01/1995 Last periodic technical inspection (MFK or TÜV): 05/04/2016 Suspension: Steel-Steel Hydraulic System: None Cab Vehicle Equipment: ABS, EBS, ESP Axles & Tires Axle 1: 295 / 80 R 22.5/8mm, Drum brakes, Leaf spring suspension Axle 2: 295 / 80 R 22.5/8mm, Drum brakes, Leaf spring suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12000 Payload: 9200 Unladen Weight: 2800 Vehicle Width: 2550 Body Body Manufacturer: WARTMANN Body Model: Tank trailer Internal Body Dimensions (L x W x H): 13800 L Body Year of Manufacture: 1995 Body Remark: 1-chamber, 13800 liters

Condition: used, Year of construction: 2012, functionality: fully functional, Typical Applications: - Pulled meat and poultry production - Ready meal and prepared food lines Features: - Continuous flow design for consistent output - Fiber pulling action (not cutting or tearing) for natural texture - Stainless steel construction with easy-to-clean access - Safety interlocks and easy washdown design - Compact footprint for seamless integration Make: Cove Model: SH-5 Made in USA Capacity: 794 kg/hr Hopper Feeder Height (mm): 1900 Hopper Opening (mm): 450 x 380 Throat Opening (mm): 270 x 220 Throat/Chute (mm): 970 Discharge Height (mm): 700 Djdpfxox Akcro Alfjwd Overall Dimensions: 1000 L x 630 W x 1900 H Weight: approx. 113 kg YouTube video: factory video, similar machine, not this exact unit!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, rotor diameter: 495 mm, number of blades: 56, rotor length: 2,000 mm, rotational speed (max.): 125 rpm, VAZ2000MNF (VAZ220/200KNF) Dsdpfx Alj Ah E Imofjwd

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, total length: 3,600 mm, total width: 3,020 mm, total height: 2,470 mm, input voltage: 400 V, number of blades: 63, rotational speed (max.): 68 rpm, rotor diameter: 600 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Hydraulic and electrical system: in working order Dwodpfx Aoz D Sz Nslfjd 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: defective spare-parts repository (used), Year of construction: 2026, On behalf of our client, we are offering this 2026 JENZ BA926 Tiger Wood Shredder, available as fire damaged insurance salvage. This machine caught fire whilst in operation with the fire concentrated in the engine bay. Location: Midlothian, Scotland Dwsdpfx Alo Ah Svkjfod For questions or more information, please call us, or send a message.

Condition: excellent (used), Catalog number 7687 TECHNICAL DATA Dwjdpfezx Rngex Alfod - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2 pcs - screen dimensions 40x40mm - toothed pull shaft (bottom) - lower shaft motor 4kW - toothed pull shaft (top) - upper shaft motor 4kW - belt conveyor - length of feed belt 4720mm - width of feed belt 500mm - main motor 75kW - auto-reverse (adjustable) - overall machine dimensions (L/W/H) 3100x2000x1830mm - overall feeder dimensions (L/W/H) 4800x780x980mm - weight approximately 5000kg ADVANTAGES – German production – auto-reverse – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Year of construction: 2021, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2021 Power: 3 kW Cushion width: up to 420 mm Dodpfx Aljzpwnzsfowd Infeed height: 20 mm Shipping via a freight forwarder is possible upon request. #8552-2

Condition: like new (used), Year of construction: 2022, Rotor: 260 mm Feed opening: approx. 510 x 815 mm Rotor length: approx. 510 mm Motor: 15 kW Blades: 24 Screen: 15 / 20 mm Technical data available upon request. Completely factory-refurbished * New blades * New counter blade Djdpfs Ah Rqvex Alfjwd * New slide guide strips * Test run * New paint job

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, year of last overhaul: 2025, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 Dedps Ahnl Refx Alfewd - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: excellent (used), CATALOGUE NUMBER 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - blade length 530mm - number of blades 2 pcs - screen dimensions 55x50mm - 2 geared pull shafts from below - motor for lower shafts approx. 3kW - geared pull shaft from above - motor for upper shaft 1.5kW - feeder belt length 4600mm Dwsdpfj Aitmbex Alfed - feeder belt width 400mm - main motor 55kW - auto-reverse - feeder dimensions (L/W/H) 4630x620x760mm - machine dimensions (L/W/H) 2510x1700x1200mm - weight approx. 3500kg - German production - auto-reverse (adjustable) - used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW Dedpfx Ale Aitlwsfjwd - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 2007, operating hours: 7,682 h, condition: excellent (used), functionality: fully functional, Used Powerscreen Chieftain 1400 Tracked Screening Plant Year 2007 +/- 7682 Hrs Just Been Fully Serviced On Engine & Hydraulics New HRC Couplings Dsdj Ahpxmopfx Alfswd Various New Rollers Steam Cleaned Deutz Engine 11ft x 5ft Two Deck Screenbox Tipping Grid 24,000 kgs Weight All Belts, Rollers, Bearings In Very Good Working Condition

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100504073, overall weight: 83 kg, load capacity: 250 kg, pivoting range: 360 °, input voltage: 48 V, input current: 34 A, Equipment: documentation/manual, We are offering this MiR250 ex-demonstration unit, manufactured in 2022. Manufacturer: MiR Model: MiR250 Year of manufacture: 2022 Dodpfx Ao Aidwzelfewd Machine type: AMR/AGV Battery: new Includes charger This MiR250 has only been used for demonstration purposes and is therefore in almost new condition. The MiR is equipped with a new battery, making it practically as good as new. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear Dwedpe Aithwjfx Alfsd - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR510 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes these chippers ideal for craft businesses, recycling companies, and woodworking businesses seeking an economical and powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, consistent shredding process - High performance with low energy consumption - Robust construction - Larger feed opening Dwedpfj Air Hcex Alfjd - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR510 ecoline Rößler shredders – “Made in Germany”

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker wood chipper, shredder, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood chipping machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecorings (for different types of wood) - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase current) - Siemens PLC controlled - MHR630 ecoline_Ecorings Dsdpfo Air H Dox Alfswd Rößler waste material shredder, "Made in Germany"

Condition: used, Year of construction: 2012, operating hours: 33,400 h, functionality: fully functional, control cabinet height: 2,300 mm, number of blades: 28, year of last overhaul: 2025, overall weight: 33,000 kg, type of input current: AC, Lindner Jupiter 2200 – Year of manufacture 2012 – 264 kW – Pre-shredder For sale is a powerful and regularly maintained Lindner Jupiter 2200, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial pre-shredder for processing various commercial waste and recyclable material fractions and was permanently integrated into our stationary production line. Technical data Manufacturer: Lindner Recyclingtech Model: Jupiter 2200 Year of manufacture: 2012 Machine number: 1744 Machine weight: approx. 33,000 kg Drive power: 2 × 132 kW (264 kW total) Rotor speed: 51 rpm at 50 Hz Operating voltage: 400 V / 50 Hz Number of knives: 28 pieces Knife dimensions: 116 × 116 × 37 mm Screen opening: Sickles 79 mm Frequency converter: ABB ACS-800 Hydraulic unit: Bosch Rexroth Hydraulic drive: 11 kW Hydraulic oil tank: 400 liters Equipment and special features The Jupiter 2200 features a frequency-controlled drive and a hydraulic feed unit for controlled material feed. The robust design and powerful cutting unit enable use in industrial recycling and processing plants. Maintenance and servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists for the Jupiter 2200 with the manufacturer Lindner Recyclingtech. In addition to the regular maintenance, extensive maintenance and modernization measures were carried out. Important work carried out: Both couplings completely overhauled. Control computer and display renewed. Djdo Ahnlbepfx Alfowd Rotor completely armored and regularly serviced. Air conditioning unit renewed. Both frequency converters (FC) overhauled. Complete new set of sickles installed. The corresponding maintenance and service records are available and can be viewed upon request. Protected housing of the control cabinets The associated control cabinets are located in a separate control room and are therefore protected from dust and dirt from the production environment. Sale due to plant modernization The machine is being offered for sale as part of the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Dismantling and loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your inquiry.

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Dedjz H Elmepfx Alfewd Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: good (used), Year of construction: 2003, empty load weight: 12,900 kg, For sale Dwsdps Ah Ilzefx Alfsd Well-maintained tracked aerial platform Working height: 20 m Trade-in and transport options available For more information, please call or send a message.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, wood chippers ERJO 604 MA 450 opening size 550 x 450 mm Dwsdpfx Alsz Abz Sofod 90 KW engine fully functional

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, year of last overhaul: 2026, VAZ2500 (VAZ145/250U) Djde Ah E Ngspfx Alfewd

Condition: refurbished (used), Year of construction: 2019, operating hours: 450 h, functionality: fully functional, type of input current: three-phase, total height: 2,836 mm, total width: 2,930 mm, total length: 2,500 mm, overall weight: 6,500 kg, empty load weight: 6,500 kg, Equipment: documentation/manual, Refurbished Optima 154 shredder. In very good condition - like new. Is a single shaft shredder of medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeder press the material against the rotor, equipped with fixed teeth that cut the material against anvil steels.
 The feeder, is operated by a last generation hydraulic system with proportional valve or hydraulic variable displacement axial piston pump.
 The process is set from software in the PLC. Key benefits: • Low electrical consumption. • Low dust and noise level. • Very simple maintenance. • It is not necessary with rotor cooling. Dwodpfe Aarakjx Alfjd • Can process material down to 10mm in one step. • Technical availability from 96% to 98%. • Possibility to add water in the inlet. Shreds materials: 
 Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles. Is on a hook-lift platform, so easy to transport. New price Optima 154 shredder - aproximately euro 300 000,00