Used Shelving Racks for sale (4,135)

Condition: good (used), Year of construction: 1999, functionality: fully functional, total width: 1,060 mm, shelf height: 2,250 mm, support length: 500 mm, -KOM 3156- Pgedpfxjxqc Txs Amyop Offered here is an SSI Schäfer plug-in shelf rack in good condition. The maximum bay load is 1,200 kg, and the maximum shelf load is 200 kg. In total, we have 23 identical racks available. The rack consists of: - 2 x Schäfer storage bins LW 512 - 2 x Schäfer storage bins LW 530 - 3 x standard shelves Rack dimensions: Height: approx. 2,250 mm Depth: approx. 500 mm Width: approx. 1,060 mm Height of storage compartments (from bottom to top): 1 x lower standard shelf: approx. 200 mm high 2 x large Schäfer storage bins: approx. 350 mm high 1 x middle standard shelf: approx. 200 mm high 2 x small Schäfer storage bins: approx. 200 mm high 1 x upper standard shelf: approx. 300 mm high The height of the Schäfer storage bins can be individually adjusted using the mounting brackets (see last photos).

Condition: good (used), Year of construction: 1999, functionality: fully functional, total length: 500 mm, total width: 1,060 mm, total height: 1,800 mm, -KOM 3166- Offered here is an SSI Schäfer boltless shelving unit in good condition. The maximum bay load is 1200 kg, and the maximum shelf load is 200 kg. Due to its low height, the rack is ideal for rooms with limited ceiling clearance. Available quantity: 20 units The racking system consists of: - 1x Schäfer storage bin LW 512 - 2x Schäfer storage bins LW 530 - 2x "Standard" shelves Rack dimensions: Height: approx. 1800 mm Depth: approx. 500 mm Width: approx. 1060 mm Height of storage compartments (from bottom to top): Pgsdpfx Amexqdy Hjysp 1x lower standard shelf: approx. 250 mm high 2x Schäfer large storage bins: approx. 350 mm high 1x middle standard shelf: approx. 350 mm high 1x Schäfer small storage bin: approx. 200 mm high IMPORTANT! The height of the Schäfer storage bins can be adjusted individually using the brackets (see last photos). Additionally, an extra Schäfer storage bin of type LW 530 can be installed on the upper standard shelf with this racking system. This configuration is shown in the last listing images.

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. These racks can be stacked one on top of each other. Pgodsx Tg Axepfx Amyep Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m 1.10m Pgodpfxsiuvxbs Amysp 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: good (used), Approx. 8 units of mobile flow rack shelving from Creform, FiFo system, assembly frame with flow levels – used: Pedpfxszp Rn Ie Amyogp Price per unit, ex works: €400.00 (net)! Manufacturer: Creform Type: Pipe and joint system Year of manufacture: unknown Dimensions: approx. 180x180x200cm 2 channels 9 swivel casters with brakes Roller rails Condition: good Available: immediately Location: Leipzig

Condition: good (used), Approx. 8 units of mobile flow rack from Creform, FiFo, absorption/assembly frame with flow levels – used: Price per unit, ex warehouse: €350.00 (net)! Manufacturer: Creform Type: Pipe racking system Pgjdpfozp Rnbox Amyep Year of manufacture: unknown Dimensions: approx. 200x130x200 cm 1 channel 8 swivel casters with brakes Roller rails Condition: good Available: immediately Location: Leipzig

Condition: used, Year of construction: 2007, Product Information "Annealing Furnace ThermConzept" Type/Model: WW 1000/06/A Condition: Used Year of Manufacture: 2007 Technical Data Maximum Temperature: 650 °C Internal Dimensions (W x D x H): 1000 mm x 1000 mm x 1000 mm Psdpfx Amszpynqoyjgp External Dimensions (W x D x H): 2200 mm x 1800 mm x 3200 mm Volume: 1000 l Power: 47.0 kW Voltage: 400 3/N V Weight: 1900 kg Inquiry Item: Transportation costs will be provided in a separate, customized offer.

Condition: good (used), Year of construction: 2021, Min. 8 bays of flow rack shelving for boxes and crates, feed rack, SSI-Schäfer – used: Price per bay, ex works: €450.00 (net), incl. dismantling, packaged and loaded! Manufacturer: SSI-Schäfer Type: KDR / box flow rack Year of manufacture: 2021 Support type: P63 Bay width: 2.63m Pedpfxszpf Hrj Amyegp Max. bay load: 2000kg Lower clear shelf height: 2,200mm DLR depth: 1.90m: shelf load 200kg 2.15m: shelf load 200kg Condition: good Available: immediately (still needs to be dismantled) Location: Erfurt area

Condition: good (used), Year of construction: 2020, Approx. 1,965 Nedcon shelving units, including upright frames, with shelf width of 1.27m, depth of 0.60m, and frame height of 2m – used: Price ex warehouse, (net), disassembled, packaged, and loaded. Per base unit (with 2 frames and 5 shelves): €89.00 Per add-on unit (1 frame and 5 shelves): Up to 20 add-on units: €75.00 From 21 add-on units: €69.00 From 50 add-on units: €65.00 From 100 add-on units: €62.50 From 500 add-on units: €59.00 For complete purchase: €55.00 Manufacturer: Nedcon Type: Plug-in system Year of manufacture: 2019 - 2023 Approx. 5 shelves per unit Dimensions per shelf: approx. 1270x600 mm Frame height approx.: 2000 mm Load capacity per shelf: 100 kg Unit load: 500 kg Total number of shelves: approx. 9,079 units Podpfjzpf Hlsx Amyogp Condition: good to very good Available: from approx. August 2026, or upon agreement Location: Erfurt area

Condition: good (used), Year of construction: 2012, Approx. 36 bays of Hofe shelving systems, shelving units 1.30m wide, 0.60m deep, frame height 3m - used -: Price ex-works: €3,500 (net), disassembled, packaged, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Pgjdpfxozpf Euo Amyjp Approx. 6 shelves per bay Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Bay load: 1,700kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: good (used), Year of construction: 2011, Approx. 84 bays of industrial shelving, Meta, shelves 1.25m wide, 0.60m deep, frame height 2.50m - used: Price ex works: €6,500 (net), disassembled, packed and loaded. Manufacturer: Meta Psdpfx Aezpf D Dsmyogp Type: Slot-in system Year of manufacture: 2011 Approx. 4 shelves per bay Dimensions per shelf: approx. 1,250mm x 600mm Frame height approx.: 2.50m Load capacity per shelf: 230kg Bay load capacity: 1,030kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Note: The photo shows more shelves per bay than are actually available!

Condition: ready for operation (used), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. Podpfxjzp I Ews Amyegp PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. Psdszp I Eqopfx Amysgp - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Pgodpfx Amjzp Iyzoyjp Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 11.20 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 05 x upright approx. 450 cm x 110 cm, pre-assembled. - 16 x crossbar approx. 270 x 14 x 5 cm, T30. - 32 x locking pins. Pgsdszp Iwtepfx Amysp - 32 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2450 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 19.60 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelving consists of : - 08 x uprights approx. 450 cm x 110 cm, pre-assembled. - 28 x crossbar approx. 270 x 14 x 5 cm, T30. - 56 x locking pins. - 56 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 4.100 € net Pgsdpfx Aszp Ivcemyjp plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, GALVANIZED PALLET RACKS FOR OUTDOOR USE Hot-dip galvanized pallet racks for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 16.80 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 007 x upright approx. 450 cm x 110 cm, pre-assembled. - 024 x crossbar approx. 270 x 14 x 5 cm, T30. - 048 x Locking pins. - 048 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 54 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 3550 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Pgjdpfx Amjzp Iufeyop Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Podpjzp It Usfx Amyjgp Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Pedpfxozp Itzo Amyjgp Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? Pgjdpfxezpvnye Amyop - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Pgsdpfx Amszpvnmsyop Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors Pedszpvngopfx Amyegp - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Pgedpfezpvnaox Amyop Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Pgsdpfozpvdhox Amyop Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.46 linear meters wide-span racking, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 11.46 linear meters Racking offer includes: - 07 x frames approx. 200 x 60 cm, disassembled - 36 x beams approx. 185 cm - 18 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per level, with evenly distributed load - Levels: 3 storage levels - Chipboard shelves, natural finish - Blue uprights - New stock, available for immediate delivery Pgjdpfxezpvc Rj Amyjp - Other quantities available on request Frame pre-assembly can be provided by us for a small additional charge of €6/net per unit. Delivery at favorable rates available on request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €965.00 net Plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner freight forwarder upon request. Transport costs depend on the destination postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.