Used Shelf Stand for sale (24,638)

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Clear width: approx. 730 mm L-profile: approx. 30 x 30 mm Njdpork I D Refx Afrjdd Top plate: approx. 95 x 60 x 6 mm Weight per unit: approx. 1.510 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Nsdpofdkb Tjfx Afredd Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Manufacturer: Nedcon Type: NS Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm Ndjdpoi Euu Rjfx Afrsd profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Ndsdpfx Afjguk Dkerod

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Nsdpfx Afjd Tt Afsrodd Technical data of the shelf connector: Manufacturer: Jung Heinrich Type: Esmena Included in delivery: 01x shelf connector used material colour: sendzimir galvanized shelf distance: approx. 200 mm L-profile: approx. 85 x 40 mm Weight/pc: approx. 0.519 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Ndsdpfxsguk Dve Afred 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the shelf connector: Shelf system: Dexion Type: P 90 Included in delivery are: 01x shelf connector, used for shelf distance: 900 mm Cross section: U 50x25 mm Nedpji Dfmtofx Afrodd Material color: sendz. galvanized Weight: 1,01 kg | pcs.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Ndsdpfjguk A Hox Afred - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Technical data for the shelf connector: Shelf system: Nedcon Type: NS Ndedpfsi Dfm Eex Afrsd Included in delivery: 01x set of spacers NR screwed L300, new consisting of each: 01x spacer NR L=300, sendz 02x hexagon bolt 8.8 M10x25 galvanized 02x Toothed nut hexagon 8.8 M10 flange galvanized 02x Flat washer M10 galvanized

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: Nedcon Type: NS Included in delivery: 1x pallet rack upright, used Material color: cream-white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment pitch: 50|50 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) Upright height: 9,000 mm Upright depth: 1,100 mm Your contact person in our company: Ndsdpfx Afjv N E H Ajrod Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Shelf system: Nedcon type: NS suitable for frame profile width: 100 mm Ndodpfx Aji Enyujfrjd for shelf distance: 300 mm profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 General information about the item: Ndodpfxei Dtcne Afred This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 28,425 mm Number of fields per rack row: 09 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 54 pcs. Total number of pallet spaces: 54 pcs. Ndedjvzappjpfx Afred The scope of delivery includes: 10x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 36x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 72x integrated locking pin, new To secure the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 20x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length of each rack row: 119,175 mm Number of fields per rack row: 39 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 234 pcs. Total number of pallet spaces: 234 pcs. The scope of delivery includes: 40x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 156x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 312x integrated locking pin, new To secure the longitudinal beams against accidental lifting 160x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 80x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, Ndedovzat Ujpfx Afrod manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data of the shelf rack: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 2.630 mm Number of bays / shelf row: 02 pcs. á 1.290 mm Number of levels plus floor level: 04 pcs. Included in delivery: 03x shelf uprights, used Material color: sendzimir galvanized frame profile dim: 50 x 55 mm adjustment grid: 25 mm incl. cross and diagonal braces The uprights are pre-assembled 1.200 mm high Nodpjpaihmsfx Afrjdd 610 mm deep 08x shelves, used Material color: sendzimir galvanized dimensions: 1.275 x 575 x 30 mm weight / pcs.: approx. 4,78 kg max. load per shelf with evenly distributed load: 120 kg 06x shims, new type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x shelf crossbars, used total length: 1.275 mm Z-profile: 50 x 25 mm number of hooks: 02 pcs. weight / pcs.: approx. 0,84 kg Material color: sendzimir galvanized 01x load plate with data of field and compartment loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Remark: Since this is a used item, can be damaged, rusting or the like. may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used ( for lateral fastening to the shelf uprights ) Total length: 391 mm Shelf distance approx.: 289 mm L - profile: 40 x 40 mm dimension center - center drill hole: approx. 353 mm Weight: 0.39 kg | pcs. Nsdpei A Iu Ajfx Afrodd Material color: sendz. galvanized

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Polypal for shelf distance: approx. 545 mm Ndsdpfxji Igcas Afrsd total length: approx. 610 mm profile dim.: U 50 x 15 mm Weight: approx. 0,650 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.010 mm depth of support: approx. 1.000 mm clear span: approx. 895 mm Njdpfx Aeib H Hyofrodd profile dim.: C: 75 x 45 x 18 mm Technical data of the deep bar: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) crossbar support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pc. ----- General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical specifications for the shelf connector: Shelf system: Polypal Included in delivery: 1x shelf connector, used Nsdjwmng Sspfx Afrjdd for shelf spacing: 250 mm Total length: approx. 310 mm U-profile dimensions: approx. 50 x 15 mm Material color: Sendzimir galvanized Material thickness: approx. 2 mm Drill hole diameter: 10 mm Weight: 0.270 kg | each includes: 2x M10 x 35 mm screws 2x M10 nuts 2x M20 washers Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), Technical data for the pallet rack upright: Rack system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack stand, used Material color: sendzimir galvanized frame profile: 140 x 80 x 2,25 mm Incl. cross and diagonal braces, Ndedpfx Aek Uuv Sjfrod base plates The uprights are pre-assembled ( screwed truss ) Height: 9.650 mm Depth: 1.100 mm General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length of each rack row: 16,325 mm Number of fields per rack row: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 30 pcs. Total number of pallet spaces: 30 pcs. The scope of delivery includes: Nodevzam Ispfx Afrjdd 06x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 20x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 40x integrated locking pin, new To secure the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data of the shelf rack: Shelving system: Dexion Type: HI280 Ndjdpopahwysfx Afrsd Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1.340 mm Number of bays / shelf row: 01 pcs. á 1.290 mm Number of levels plus floor level: 04 pcs. Included in delivery: 02x shelf uprights, used Material color: sendzimir galvanized frame profile dim: 50 x 55 mm adjustment grid: 25 mm incl. cross and diagonal braces The uprights are pre-assembled 1.200 mm high 610 mm deep 04x shelves, used Material color: sendzimir galvanized dimensions: 1.275 x 575 x 30 mm weight / pcs.: approx. 4,78 kg max. load per shelf with evenly distributed load: 120 kg 04x Balance plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x shelf crossbars, used total length: 1.275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. weight / pcs.: approx. 0,84 kg Material color: sendzimir galvanized 01x load plate with data of field and compartment loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Remark: Since this is a used item, damage, rusting or the like may be present. may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data of the shelf rack: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 6.500 mm Number of bays / shelf row: 05 pcs. á 1.290 mm Number of levels plus floor level: 04 pcs. Included in delivery: 06x shelf uprights, used Material color: sendzimir galvanized frame profile dim: 50 x 55 mm adjustment grid: 25 mm incl. cross and diagonal braces The uprights are pre-assembled 1.200 mm high 610 mm deep 20x shelves, used material color: sendzimir galvanized dimensions: 1.275 x 575 x 30 mm weight / pcs.: approx. 4,78 kg max. load per shelf with evenly distributed load: 120 kg Ndsdpfxepaih Ae Afred 12x shims, new type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 20x shelf crossbars, used total length: 1.275 mm Z-profile: 50 x 25 mm number of hooks: 02 pcs. weight / pcs.: approx. 0,84 kg Material color: sendzimir galvanized 01x load plate with data of field and compartment loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Remark: Since this is a used item, damage, rusting or the like may be present. may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the shelf connector: Shelving system: SLP The scope of delivery includes: 01x shelf connector, used for shelf spacing: 310 mm Total length: 310 mm Cross section: L 25 x 25 mm Material thickness: approx. 3.00 mm Material color: orange Drill hole diameter: 13 mm Weight: 0.460 kg | piece 04x screws M10 x 35 mm 04x nuts M10 Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery. Ndjdpsvuxy Tjfx Afred

Condition: good (used), Scope of supply includes: 01x shelf connector, used Manufacturer: Schäfer Type: PR600 Material colour: RAL 5010 blue Total length: approx. 280 mm Distance between shelves: approx. 200 mm L-profile: approx. 40 x 40 x 3 mm Weight: 0.400 kg | each 02x bolts M8 x 20 mm Ndjdjwv Rg Hepfx Afrjd 02x nuts M8 04x washers M8 Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for collection only. Transport or shipping of this item is subject to additional costs, which can be provided upon request depending on the delivery location and the scope of supply.