Used Shelf Frame for sale (9,233)

Condition: good (used), machine/vehicle number: 2823, Year of construction: 2011, total length: 12,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 40" from Uniktruck Ppjdpfx Aoyuhvuomysw

Condition: used, 1 used Vollmer CAGB54 U band saw sharpening machine Grinding wheel diameter: 200 mm Complete Pjdpfxezguvks Amyjpw Control system functioning Carriage has been overhauled and newly fitted with bearings, and is also suitable for CAGB50U Head and coolant pump have been newly fitted with bearings.

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Ppodpszgr Iqsfx Amyjw WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Ppsdpfxey At A Ds Amyjw Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: as good as new (ex-display), Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 Ppodoyyqnfopfx Amysw With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: reconditioned (used), Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press Ppodpfx Amjxnqw Teysw ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 2000, Used, good condition Make: Schneider Ppsdpswkvw Hefx Amyew Type 2406 Year of manufacture: 2000 Machine no. 910 CE-certified Cutting height 250 mm Saw blade tiltable between 90° and 30° (60°) Turntable rotatable 180° Motor power 7500 W, 400 V Saw blade diameter 650 mm Cutting height for rip cuts Continuously adjustable from 0 to 250 mm Cutting width adjustment for rip cuts 650 mm by transverse saw movement Motorized tilting with digital display Movable machine stand Automatic saw feed with two-hand control Laser kerf indicator, cross cut Pneumatic workpiece clamping on the right and left New price approx. €25,000.00 Extraction connection 100 mm Space required approx. 2800 mm x 2800 mm x 2000 mm Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on freight, unpacked Handed over in as-is condition, as seen, without warranty or guarantee

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, total length: 750 mm, total width: 1,800 mm, type of cooling: air, DGUV certified until: 07/2027, Equipment: lighting, TOP Refrigerated Display Case Dilara 180 Fan-assisted refrigerated display case 4 adjustable stainless steel shelves Sliding doors made of insulated glass Temperature adjustable from +3 to +15°C Refrigerant: R 290 Only available from us: DGUV V3 tested Dimensions: 1800 x 750 x 2000 mm, W x D x H Connection: 230V, 1166 Watts Demonstration unit & SAB tested (New price: €6,299) With warranty + spare parts service Ppjdpsx I U Hhefx Amyjw Optional: Maintenance contract Delivery service Service package Training and commissioning

Condition: used, Year of construction: 2018, Please contact Gebrauchtgeräte Center for more information Ppsdpfjzfluzox Amysw

Condition: used, Year of construction: 2022, Please contact Gebrauchtgeräte Center for more information Pjdpjzfkm Njfx Amyspw

Condition: used, Year of construction: 2019, Please contact Gebrauchtgeräte Center for more information Ppodpfx Amjzfkmieysw

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine Ppodpfehqmghsx Amyow -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: used, Year of construction: 2002, Year of manufacture: Mar 2002 New: No Axle 1: left mm right mm Axle 2: left mm right mm Ppjdpoyn Nwgjfx Amysw Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, Technical specifications: Number of pistons: 6 Piston diameter: 60 Connection to central heating – None – cold shelves Ppsdpfx Amezd Ekaoyjw Shelf dimensions: 1300x3000 mm Clearance: 475 mm Hydraulic clamping Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 3360 mm Width: 1470 mm Height: 1750 mm

Condition: used, Meassuring frame for logs and timber type Rema 9001 Pedpfx Ajzd Azvsmyjpw Maximum meassuring field 700 mm

Condition: used, This package includes: 1 x Crossbeam, 3,600 mm (yellow) 2 x Locking pins Approximately 170 uprights and 800 crossbeams are available for this system. Please contact us for more information. Manufacturer: Jungheinrich Condition: used, good condition Shelf depth: 1,100 mm Crossbeam length: 3,600 mm Ppsdpfx Amoyu Rbasyew Load capacity per shelf: 3,200 kg Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guard rails Grid decking Rear panel grid Deep shelf supports Barrier railings and much more... Just ask us! Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net from our location. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and without obligation. We reserve the right to sell items prior to confirmation. - Retention of Title: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial businesses (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 921602, Offer 25342 Technical data: - Maximum load capacity per shelf level: 2000 kg - 6 extendable shelves - 1 upper storage compartment - Shelf dimensions approximately: W 3100 x D 1600 mm - Maximum extension of each shelf approximately: 100% - Distance between shelves: 240 mm - Space requirement approximately: W 3500 x H 2250 x D 2980 mm - Space requirement in depth when extended: 3200 mm - Weight approximately: 2000 kg Pjdpfjzdrulsx Amyopw

Condition: new, Wide-span shelving / basic shelving / 2550x2500x600 WxHxD Podpjcfbzcefx Amyopw Wide-span shelving, new Dimensions: W 2550 x H 2500 x D 600 mm including 4 shelf levels Shelf load: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelving uprights, 600x2500mm unassembled, including cross and diagonal braces, plastic foot plates 8x crossbeams 2450mm, including locking pins 4x shelf inserts 2430x545mm, thickness: 22 mm

Condition: new, Wide-span shelving unit, new Dimensions: L 2550 x H 3000 x D 800 mm Includes 4 shelf boards Shelf load capacity: ~250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 800x3000mm Unassembled, including cross and diagonal braces, Plastic footplates 8x Cross members 2450mm, Including locking pins 4x Shelf boards 2430x745mm, Thickness: 22 mm Podpfxocfbyzo Amyspw

Condition: good (used), The scope of delivery includes: 30x press locked gratings, used Material color: hot-dip galvanized Total depth: 995 mm (bearing bar direction) Total width: 1.190 mm (cross bar direction) bearing bar dim.: 40/2,0 mm frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11,44 kg | pcs. Weight / pallet: approx. 370,00 kg Internal designation: K Remark: - The gratings may have damages, scratches, dents, welds etc. - The above price is valid only when purchasing a complete complete pallet of 30 pcs. General information about the item: This item is offered for pickup only. A transport or shipment of this desired transport or shipment of this article is associated with additional Podpfxjncbh Re Amyjpw additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x workbench stand, used Material color: blue Stand height: approx. 910 mm Stand depth: approx. 1,050 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( welded framework ) 04x workbench crossbars, used Material color: orange Box profile: 120 x 50 mm Truss type: HN 120|20 clear width: 2,700 mm 08x locking pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Ppsdpfxjrdy Ivs Amyew The pictures serve to illustrate the material. The material color may vary. The workbench racks are commissioned in an assembled state; The workbench stands are pre-assembled; The production time is usually approx. 3 - 5 working days. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Wide-span shelving unit, new Dimensions: L 2050 x H 3000 x D 800 mm Includes 4 shelves Shelf load capacity: approx. 300 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving unit consisting of: 2x Shelf uprights, 800x3000mm Unassembled, includes cross and diagonal braces, Plastic foot plates Pedpfx Aocfbyhomyepw 8x Crossbeams 1950 mm, Includes locking pins 4x Shelves approx. 1930x745mm, Thickness: 22 mm

Condition: good (used), The delivery includes: Psdpei Enx Tofx Amyopw 1x shelf connector, used (for lateral attachment to the shelf upright) Manufacturer: Jung Heinrich Type: Esmena Material color: mill galvanized for shelf spacing: approx. 250 mm L-profile: 85 x 40 mm Weight: 0.68 kg | per piece

Condition: good (used), The scope of delivery includes: Pedpfx Amsi Hpkxeyopw 1x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 70 mm for shelf spacing: approx. 250 mm Dimensions of head plates: 130 x 60 mm Profile dimensions: U 62 x 45 mm Weight: approx. 1.660 kg | per piece General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet racking crossbeam: Racking system: META (Thyssen) Included in the scope of delivery: 1x Pallet racking crossbeam, used Material color: orange Crossbeam type: HN 100|20 Box profile: 100 x 50 mm Clip: 3 HK (hooks) Clear width: 2,700 mm Maximum load per crossbeam pair: 2,100 kg, with evenly distributed load 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: Ppjdpfxoiimtqj Amysw This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)