Used Shark 260 for sale (2,608)

Year of construction: 1985, condition: used, Hardening furnace, Heraeus Type KM 260 Bwodpfxjgtxuqo Afmep Width 250 mm, height 150 mm, depth 500 mm Temperature up to 1150 °C

Condition: used, Year of construction: 1970, Weiler lathe with tailstock. Bwodpfx Aohtnu Tofmsp

Condition: good (used), Stock number: 2889 Bwjdeugr Aaepfx Afmsp Manufacturer: Weiler Year of manufacture: 1969 Type / Model: FDU 260/38 Machine number: 11597/330 Control: conventional Center width: 400 mm Passage: 38 mm Tip height: 125 mm Turning diameter over bed: 250 mm over slide: 140 mm Speed range: 30 to 2,500 rpm Number of turret positions: 6 Power requirement: 0.9 kW Accessories/equipment: Various collets and turret inserts Condition: good Weight: approx. 0.5 t Dimensions: 1,300 x 700 x 1,200 mm

Condition: used, Year of construction: 1996, charge load 260 liter 1.300 mm tank diameter / tank height 1.150 / 500 mm 300 mm Bwsdpjwa Uhpefx Afmop motor capacity 1,5 / 3,0 kW motor speeds: 985 / 1.480 U/min voltage 400 V weight of the machine ca. 740 kg dimensions of the machine ca. 1,50 x 1,30 x 1,25 m Finishing machine - Serial-No.: 15770 / 96-08 - Machine ON: 37.851 h - Timer

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Bodpfx Aefg E H Tsfmjwp Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Bjdpfx Afjfg E H Usmswp Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. Bwedpfx Afsfg E Hyomjp - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm Bwsdpjfg E H Esfx Afmjp band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Bwsdofg E H Sspfx Afmep electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm Bwodpfxsfg E Ias Afmop capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Bwodefg E H Iopfx Afmjp Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Bedpfx Asfg E H Refmjwp Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: used, Year of construction: 1991, power: 3.5 kW (4.76 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 260 mm, total height: 1,720 mm, total length: 2,100 mm, total width: 2,300 mm, overall weight: 1,280 kg, table height: 700 mm, We are offering this used KASTO SBA 260 AU bandsaw, year of manufacture 1991. Model: SBA 260 AU Year: 1991 Cutting diameter: 260 mm Saw band dimensions: 3830 x 27 x 0.9 mm Cutting range (square): 260 x 260 mm Infinitely variable cutting speed: 19-110 m/min Feed length: 750 mm Multiple feed length: 6750 mm Material support height: 700 mm Dimensions approx. 2100 x 2300 x 1720 mm Voltage/Frequency: 380 V / 50 Hz Connected load: 3.5 kW Bwsdpfoy Eqavox Afmop Connection fuse: 16 A Machine no.: 101 378 6006/86249 Weight approx.: 1280 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, mileage: 82,821 km, power: 130 kW (176.75 HP), first registration: 03/2016, fuel type: diesel, overall weight: 3,425 kg, tire size: 195/75 R16C, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, Year of construction: 2016, Equipment: ABS, hydraulics, onboard computer, soot filter, === KEY SPECIFICATIONS === Year of manufacture: 2016 Mileage: 82,821 km Working height: 25.6 m Max. horizontal outreach: 15.5 m (rear, 100 kg) / 12.8 m (side/front, 100 kg) Platform capacity: 230 kg (reinforced version) Truck type: Nissan Number of axles: 2 Truck drive: 4x2 Transmission: Manual Cab type: Single Engine power: 130 kW Bjdpfx Afoxy Nqpjmowp Fuel type: Diesel Platform dimensions (L × W): 1400 × 700 mm Platform rotation: Yes (hydraulic 2 × 90°) Boom type: Telescopic (4-section aluminum hexagonal boom) Stabilisers: Yes – 4 hydraulic outriggers (2.15–3.40 m spread) CE certification: Yes Total vehicle weight: 3425 kg === HIGHLIGHTS === Reinforced basket version with 230 kg safe working load Excellent 25.6 m working height with strong outreach 4-section aluminum hexagonal telescopic boom Compact transport dimensions: 6.68 × 2.15 × 2.95 m Fully CE-certified and ready for immediate operation Reliable and versatile for construction, façade work, inspection and maintenance === CONDITION === Excellent working condition – fully inspected, tested and maintained by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €57.500 EXW (excl. VAT). This Palfinger P 260 B truck-mounted platform features the desirable reinforced 230 kg basket and delivers outstanding performance with a 25.6 m working height and strong horizontal outreach. Mounted on a compact 3.5-ton truck chassis, it is ideal for daily professional use in construction, renovation, cleaning, façade maintenance and inspection tasks. Fully CE-certified and supplied with complete documentation. Ready for immediate use. === DELIVERY === Crane loading available upon request. Flexible global transport solutions tailored to your needs. All logistics handled professionally by the Collé Rental & Sales team.

Condition: used, functionality: fully functional, Year of construction: 2016, power: 120 kW (163.15 HP), load capacity: 200 kg, mast type: telescopic, lifting height: 23,600 mm, lifting power: 200 kg/m, platform length: 1,400 mm, platform width: 700 mm, overall weight: 3,500 kg, empty load weight: 3,300 kg, transport length: 6,680 mm, transport width: 2,150 mm, transport height: 2,950 mm, construction height: 3,000 mm, fuel type: diesel, fuel consumption per hour: 8 l/h, fuel tank capacity: 80 l, tire size: 215/75 R17.5, tire condition: 80 %, wheelbase: 3,700 mm, ground clearance: 230 mm, color: white, Equipment: ABS, UVV, soot filter, tilting carriage, === MAIN SPECIFICATIONS === Year of manufacture: 2016 Operating hours: – (95,000 km chassis) Maximum working height: 25.6 m Maximum horizontal outreach: 15.5 m (rear) Platform capacity: 200 kg Truck type: Nissan Number of axles: 2 Drive type: 4x2 Transmission: Manual Cab type: Single Engine power: approx. 120 kW (163 HP) Fuel type: Diesel Platform dimensions (L x W): 1,400 x 700 mm Platform rotation: Yes (2 × 90°) Boom type: Telescopic (4-section) Stabilisers: Yes (4 hydraulically extendable) CE certified: Yes Total vehicle weight: 3,500 kg === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Good working condition – fully inspected, serviced and tested by certified professionals. Color: white. Rated 4/5. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €49,500 excl. VAT (€59,895 incl. 21% VAT) The Palfinger P 260 B is a compact and reliable truck-mounted platform on Nissan chassis, offering a working height of 25.6 meters and a horizontal outreach up to 15.5 meters. Equipped with a 4-section telescopic aluminum boom, 200 kg basket capacity, and four hydraulically extendable outriggers, this platform provides excellent stability, reach, and ease of use. CE certified, well maintained, and ready for immediate operation. Ideal for maintenance, installation, cleaning, and rental applications. Bwedpfoxct U Rsx Afmjp === DELIVERY === Crane loading available upon request for smooth handling during dispatch. Flexible delivery options tailored to your destination and logistics preferences. All transport is professionally managed by the Collé Rental & Sales logistics team.

Condition: reconditioned (used), Used semi-automatic bandsaw MEP Shark 281 sxi evo Three operating modes: semi-automatic, manual, and manual dynamic (gravity) Blade dimensions: 2950 x 27 x 0.9 mm Two blade speeds: 36/72 m/min Max vice opening: 285 mm Cutting capacity: at 0° round 250 mm, rectangle 280x200 mm at 45° round 190 mm, rectangle 180x180 mm at 60° round 120 mm, rectangle 110x110 mm Year: 2006 Weight: 435 kg Fully serviced. Bedpjyyn Suefx Afmowp

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg Bwjdpfxeqvcnns Afmjp speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Year of construction: 2000, cutting diameter 260 mm saw band length 3800 x 27(25) x 0,9 mm cutting width 400 x 260 mm cutting speed 20 - 90 m/min Bsdpfxoy D A Ewo Afmswp total power requirement 1,85 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,8 x 1,6 x 1,5 m Semi-automatic miter band saw - Miter cutting +/- 60 degrees - Coolant system - Emergency stop

Condition: good (used), machine/vehicle number: 087222, Horizon Perfect Binder BQ-260, 1 station, hotmelt glue, envelope feeder, machine number 087222, in good condition, immediately available. Bedpfx Afexdh Etjmswp If interested, we are happy to provide information on further machines available at our facility. You are welcome to view the machine at our premises by appointment.

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Main technical specifications: Bwodpfx Afoy A Typsmjp • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: refurbished (used), Year of construction: 2011, Used automatic metal band saw MEP SHARK 282 nc evo Year of manufacture: 2011 Blade dimensions: 2950x27x0.9mm Cutting angle: from -45° to +60° Bwodpfx Aoykvg Hefmep Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Blade cutting speed: from 15 to 100m/min Cutting capacity at 0°: - round 250mm - square 220mm - rectangle 280x220mm Machine weight: 980kg The machine is fully refurbished.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Weight 1600 kg Bsdpfsvz Epzox Afmswp Total power requirement 22 kw

Condition: new, Length: 1500 mm 6 rollers made of tubular steel, width: 185 mm Bsdofxu Tkjpfx Afmjwp Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm

Condition: good (used), functionality: fully functional, Year of construction: 1985, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bosch, controller model: CC 300, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,300 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 16,800 kg, total length: 5,000 mm, total width: 5,000 mm, total height: 2,600 mm, Equipment: documentation/manual, We offer this good TRUMPF Trumatic 260 Rotation CNC punch, year of construction 1985. manufacturer: TRUMPF model: Trumatic 260 Rotation year of construction: 1985 condition: good category ID: 908 type ID: 1180 type: CNC punch If you have any questions or need more information, feel free to send us a message or give us a call. TRUMPF Trumatic 260 Rotation & Quicksharp ALL TOOLING INCLUDED • Punching Force: 250 kN (approx. 25-30 tons) • Footprint: L x W x H 5000 x 5000 x 2600 mm • Working Range (X x Y): 2500x1300 mm (plus optional repositioning) • Max Sheet Thickness: 6.4 mm Bwodpfxey Ax I Es Afmjp • Max Workpiece Weight: 150-200 kg • Tooling: 10 stations (with 360-degree rotation of all tools) • Max Tool Diameter: 76.2 mm • Max Rotation Speed (C-axis): 360°/sec • Traverse Speeds (X/Y): Up to 90 m/min (X), 60 m/min (Y) • Control: Bosch CC 300 (typical) • Machine Weight: Approx. 16,000-16,800kg • Compressed air requirement: 6 bar • Motor Power Hydraulics: 7,5 Kw • Mains Connection: 380 volts, 50 Hz, 35 kVA

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. Bwjdjyv Nyljpfx Afmjp - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.