Used Shaped Punch for sale (3,191)

Year of construction: 1985, condition: good (used), Bobst SP 130 E Year 1985 Max.size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Codoif Ed Dspfx Acyehd Max. cutting force Cutting force: 500 T Centerline Immidiately available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D Chsdpfxew Suwys Acysd MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, functionality: unexamined, Used TRUMPF CS 75 Punching Machine for Sale For sale is a robust and well-maintained TRUMPF CS 75 punching machine – ideal for industrial metalworking applications. Technical specifications: Model: TRUMPF CS 75 Punching force: 75 kN (7.5 MPa) Type number: 8206 Machine number: 1129 Connection: 380 V / 50 Hz / 5.3 kVA Compressed air connection: 6 bar Motor (Himmel Tübingen): 3~ 220/380 V 8 kW, 25 A 615 Nm torque 600 rpm Condition: Used Many tools included. Operating manual included. Chjdjxb Aytopfx Acysd

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ Cedovf I Ibepfx Acyehd strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3MM202810A, Euromac punching machine with a very extensive set of tools; machine has been regularly inspected and maintained. Fully operational and ready for immediate use. Chodpfx Acjw Ehv Reysd

Year of construction: 2010, condition: ready for operation (used), General Data Machine weight 21000 Control Unit Brand FANUC Model n/a Main Drive Number of axis 3 Turret Number of turrets 45 Additional Equipment Power Required: 27 kVA Noise Level: 91 dB (A) This 3-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Chedpfxew N Tnrj Acyed Application Types Punching

Year of construction: 2004, condition: good (used), Bograma die-cutting machine Proprietary control system Equipment: 4 x waste removal units Head and foot trimming unit Codpfx Acswt A R Eoyjhd

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, punching force: 28 t, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,000 mm, TECHNICAL DETAILS Chodpfow Suvvjx Acyed Sheet width: 2,000 mm Sheet length: 1,000 mm Punching force: 28 t MACHINE DETAILS Machine weight: approx. 11,000 kg EQUIPMENT - Various tools

Year of construction: 2000, condition: used, For sale are 2 James Burn EX 610 Auto-Punch punching tools: 2:1 with 6mm round pins (610mm width) and 3:1 with 4x4mm square pins (380mm width). Cedow Ulywopfx Acyohd Condition is refurbished; all pins are included and freshly sharpened. Price is €500 per unit, or €900 for both. Shipping within 24 hours, delivery across Europe.

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Chodjw Uk A Ropfx Acyed

Condition: excellent (used), Year of construction: 2008, Amada EMK 3510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm ( ONE REPOSITION) 34.5 mm mild steel 150Kg max sheet weight mm 58 Stations Turret Turret Stations: Cjdpfjw Dc Dysx Acyjhd 36 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 4 x C (Max. Dia. 50.8mm) 2 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x E (Max. Dia. 114.3mm)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Chsdpfxjw Nb D Us Acyod Machine weight 17500 kg Control Unit Model WIN NT Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, X working area max.: 3085 mm Y working area max.: 1650 mm Control: Siemens Sinumerik 840 D Laser power: 3200 Watts Operating hours: Power supply 41,117 h Cjdpfxow I Rq Is Acyohd Laser ready 37,005 h Laser beam on: 7,365 h Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change device for cutting heads - Programmable cutting gas selection/pressure setting - Capacitive height control (DIAS III) - ContourLas function - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 17 stations (21 – clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast shutoff of hydraulics - Automatic shutdown - Automatic part slides, each 500 x 500 mm - Sensors for both part slides - 2 good-part bins - Scrap slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - Remote diagnostics unit - RJ 45 network connection - 3.5'' floppy disk drive + Warp detection + Blow-off device for small parts + AutoLas Plus (FocusLine) + Function for deburring and roller technology + Function for thread forming with thread former breakage monitoring + MultiShear function + MultiTool function + Marking/fast beading function + Softpunch function + Low-scratch processing + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tipping container + Additional clamping claw Automation: + Peeling system + GripMaster (3000 x 1500 mm) + SheetMaster (3000 x 1500 mm) + Lift table (300 mm)

Condition: good (used), Year of construction: 2000, functionality: fully functional, punching force: 28 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, TECHNICAL DETAILS Csdpfx Aow Suu Socyjhd Pressing force: 28 t X-axis: 2000 mm Y-axis: 1000 mm MACHINE DETAILS Machine weight: approx. 11000 kg

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Csdpfxeq Hu H Re Acyohd Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Chsdpjqwg Acefx Acysd Punching force 200 kN throat 560 mm Tools up to 100 mm Die thickness: 0.5 to approx. 10 mm. Further data see data sheet .

Condition: used, Year of construction: 2008, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 750 mm, punching diameter: 105 mm, throat depth: 750 mm, compressed air connection: 6 bar, stroke length: 90 mm, Equipment: safety light barrier, Compact 750 x 2000 CNC / Revo Cjdpfx Asw S E U Ascyjhd - Year of manufacture: 2008 - Trumpf tooling system - Head 1: Standard / RevoTool - 90 mm punching stroke - X-axis: 2000 mm Y-axis: 750 mm - 2-axis CNC Labod control - Repositioning device - Brush table - Standard hydraulics

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Csdpfx Ajdzqmzscyjhd Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Csdpjwlifmefx Acyohd Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Cedpfow Sxyfex Acyshd

Condition: excellent (used), Punch St 225 Hydropneumatic, air consumption 9l/per stroke Ram stroke 30 mm Punch pressure 3600 Kp at 6 bar 6000 Kp at 10 bar Pressure ratio 1:6 Foot switch Projection 100 mm, table surface 280 x 200 mm Cjdpst Sigzsfx Acyjhd Weight 60 kg

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Chededzqlvopfx Acyod Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers Cedpfx Aewld Suecyjhd - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Cedpfx Asw Sxyljcyjhd

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Chedpfx Aew Sxyrocysd