Used Separators for sale (5,821)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, Additional Equipment Mechanical and electrical preparation for fire extinguishing system Cooling system with 600l capacity and 50µm filter Fpjdpfx Agex D H I Ts Dsr Pump with options of 8 or 20 bar IEMCA Boss 332E bar loader for bar length up to 3m Bristol B270/E oil mist separator Moving headstock (80mm) with tools on slides plus tool breakage detection This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2025, operating hours: 2 h, COMPLETE COPPER SORTING AND GRANULATION LINE CONSISTING OF: FEED CONVEYOR, SHREDDER WITH EXTRACTION, DISCHARGE CONVEYOR, DOUBLE DENSIMETRIC TABLE, DISCHARGE CONVEYOR, TURBO GRANULATOR, DENSIMETRIC TABLE 2, DISCHARGE CONVEYOR, SCREEN, DUST FILTRATION, FULL CONTROL CABINET, SPARE PARTS, ONE TURBO GRANULATOR IN ADVANCE. New equipment. Sold with all connection electrical cables. Fpedswb S Nmopfx Ag Dor

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) Fedpsx D Abpofx Ag Depr For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Fsdpfx Ajx Ddc Isg Djpr Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, Field of application: Mining In the realm of heavy-duty machinery, Polygonmach leads with its revolutionary mobile crushing and screening plant on wheels. This unique mobile crusher, consisting of a jaw crusher measuring 600*380mm and a second chassis equipped with the renowned Metso hp100, is designed for the toughest applications. These units aren't merely a combination of superior technology and robustness but also exhibit a deep understanding of their user's challenging requirements. With the inclusion of a Sandvik ch430, Terex, or locally equivalent cone crusher, Polygonmach stands at the apex of engineering excellence, providing highly efficient, mobile, and flexible solutions. The three-deck vibrating screen, a vital component of this mobile plant, plays an instrumental role in classifying and separating materials, ensuring you receive the highest quality output. Its seamless integration with the crushers guarantees a streamlined operation, reducing downtime and optimizing production rates. What sets this Polygonmach mobile crusher apart is its closed-circuit configuration, specifically designed for processing hard stones. Unlike conventional crusher plants, the closed-circuit system ensures precise material grading, reduced fines, and enhanced end-product quality. The inclusion of the single chassis in this design further optimizes the machine's mobility and ease of setup. The array of belt conveyors integrated into the mobile crusher system adds another dimension of flexibility to the operation. Their role in material transportation is critical to the overall efficiency and speed of the operation, ensuring continuous and uniform feed to the crusher. Technology: jaw Fodpfxex Dzb Uj Ag Djpr Mobility: mobile Capacity: Min.: 60 t/h(37 lb/s)Max.: 80 t/h(49 lb/s) Motor power: 220 kW(299.12 hp) Opening height: 550 cm(216.5 in) Opening lenght: 300 cm(118.1 in)

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Fpodpjw Ic H Iofx Ag Dor Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Year of construction: 2021, operating hours: 66,828 h, condition: ready for operation (used), Main Drive Laser power 2.5 kW Additional Equipment Automatic tube bundle loader for initial lengths between 3200 and 6500 mm Loading with an overhead crane possible 4000 kg loading capacity Special lift loader equipment for square, rectangular, and flat-oval tubes Tube separation with length measuring station Equipment for a 6500 mm bundle loader for pipes with sensitive surfaces Artube nesting software included This ADIGE LASERTUBE LT722D was manufactured in 2021. It's designed for laser processing of tubes, handling materials like mild steel and stainless steel. It supports various tube shapes, including round, square, and rectangular, with dimensions up to 140 mm. Features include a PRECITEC AK-HP cutting head, automatic tube bundle loader, and a robust unloading system. Ideal for high-quality laser cutting operations. Contact us for more information about this machine. Fpedpfex D Nnisx Ag Djr Application Types Cutting

Condition: new, ELBARON COB-H13 COBARON Mechanical air filter SN:67494 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpjdpfx Asi D Urbjg Djr

Condition: good (used), Sumbel Enano 150 gluing machine The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. Fpodpou Umapofx Ag Der A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Year of construction: 2003, condition: ready for operation (used), Additional Equipment Scaffolding with cladding Work tank // Flood tank 1 // Condensate tank // Flood tank 2 Fodpfx Agex D Snfe Dspr Continuous distillation Automatic sliding door Water separator Bogie without cover Storage with drive Drying cooler Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device HD - IFW Circulation filtration including chip rinsing This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Application Types Other Machine Tools

Condition: ready for operation (used), Emag FSDPI-0314.06160.00 drive spindle SN: 16-016014 from Emag machine VSC200 DUO ATTENTION: Costs for packaging and shipping please inquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Fsdpsur Daisfx Ag Dspr

Condition: good (used), Tecnomac Sprinter 76 Automatic laminating machine The most efficient machine on the market from a legendary manufacturer. It is an advanced machine with high efficiency thanks to an external heating thermostat. Production Italy. Technical data: Max sheet size: 760mm x 1040mm Min sheet size: 210mm x 210mm Min weight: 120 gsm Max grammage: 400gsm Operating temperature: 80-145°C Max working speed: 40m/min Weight: approx. 1800 kg Power supply 380V Fpodpfxsxyvxtj Ag Dsr Additionally, air 8 Bar A steel, chrome-plated cylinder with a large diameter, filled with water for greater operational stability. Pneumatic pressure, separation and automatic feeding. Adjustable pressing force. Feeding from a high stack, Spiess type feeding head Expanding roller for attaching the foil. Sheet straightening module.

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Spindle motor power 10 KW Number of axis 4 Table Number of tslots 12 Turret Number of turrets 2 Fjdpfx Aex D Rudeg Dopr Tool taper VDI 25 Media Chip conveyor Yes Additional Equipment Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2004. It features a CNC lathe with dual spindles capable of speeds up to 6300 and 7000 rpm respectively, and two 12-slot tool turrets. Includes high-pressure coolant systems, a chip conveyor, and a bar feeder for efficient operation. Ideal for precision turning tasks. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Fsdpfx Aevkt N Iog Djpr Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CTX 420 Fpodox D D Ahjpfx Ag Djr Main Drive Number of axis 3 Additional Equipment Chip conveyor Oil mist separator via mechanical industrial filter, 1500 m³/h Package bar processing G Signal light 4-color Hollow clamping device, Ø 68 mm Lifting beam included This Gildemeister CTX 420 linear was manufactured in 2008. A robust horizontal turning machine featuring HEIDENHAIN Plus iT CNC control, tool drive, C-axis, Y-axis, and a chip conveyor. It includes a tailstock and a tool measuring device. The tool turret was completely overhauled this year. Consider the opportunity to buy this Gildemeister CTX 420 linear horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Sumbel Perkeo Edge Gluer This machine is fully operational and ready for production. This is the most valued brand among small laminators. Ideal for the production of covers, decorative packaging, etc. Made in Germany. The machine uses cold glue. Copper rollers. Smooth adjustment: glue thickness and gap width. Set of separators. Easy cleaning without the need for tools. Fodpfjx A Sdqsx Ag Dopr 230V power supply. Weight: 15kg. Roller width: 60mm.

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Fpedpfx Asx D Hvdsg Dsr Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: good (used), Foliant Mercury 760 NG Laminating Machine Fodpfjxwttisx Ag Depr The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,797 h, Control Unit Brand FANUC Model 21i-TB Additional Equipment Door monitoring / Spindle clamping device for the main spindle / Main spindle indexing 15° (not applicable for 480S) / Work light / Disconnect switch (control current: 30mA, available as an option for 480A) Tool set This Star SB-16 was manufactured in 2005. It features a robust FANUC control system, separate coolant tank, automatic central lubrication, and a 6-station tool holder. Ideal for precision turning, it includes a 4-spindle drill holder and a comprehensive workpiece removal system. Consider the opportunity to buy this Star SB-16 swiss type turning machine. Contact us for more information. Fpsdpox D Sm Uofx Ag Djr Application Types Turning

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Material: Stainless steel / Mains voltage connection: 230VAC / 50/60Hz/ 1Ph I - approximately 2.4 kVA I - approximately 10 A via separate fused supply line / Temperature range: +5 to +35°C, standard; optional 40°C / General protection class: IP 65 (except switch cabinet door due to cooling) X-ray Technology Fodjx D I T Depfx Ag Dspr This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 60–6000 Spindle motor power 11/15 kW Tool taper A2-5 Media Oil water separator Yes Chip conveyor Yes Additional Equipment Turret with Direct Mount (12 stations) High-Precision Linear Guides on All Axes Coolant System Hydraulic System Full Enclosure Automatic Lubrication System Signal Lamp (3-color) Work Area Lighting Fpsdpjx D N D Refx Ag Dor Automatic Machine Shutdown (via M-Code) Automatic Chuck Operation This Goodway GLS-150 was manufactured in 2018. A robust horizontal turning machine featuring a FANUC 01-T control system with a 10.4" LCD and Manual Guide functionality. It boasts a spindle speed of 60-6000 RPM and a maximum bar capacity of 51 mm. Equipped with a high-precision linear guide on all axes, a 12-station turret, and a reinforced coolant pump for enhanced performance. If you are looking to get high-quality turning capabilities consider the Goodway GLS-150 machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of spindles 2 Spindle speed range 6300 Fpedpfox D Rt Tsx Ag Dsr Spindle motor power 10 KW Number of axis 4 Media Chip conveyor Yes Additional Equipment Emco standard bar feeder interface Oil mist separator 2 coolant pumps for spindle flushing 2 high-pressure coolant pumps (10 bar) Parts ejector with flushing through counter spindle Short bar feeder This 4-axis EMCO TURN 332 MCPlus was manufactured in 2006. It features a CNC lathe with a drive power of 10 KW, main spindle speeds up to 6300 rpm, and counter spindle speeds up to 7000 rpm. Equipped with two 12-slot tool turrets VDI 25, it supports up to 24 driven tools. The machine includes a Sinumerik 840D control, chip conveyor, and a bar feeder for bars ranging from 6-45 mm in diameter. Contact us for more information. Application Types Turning

Year of construction: 2023, operating hours: 218 h, condition: ready for operation (used), Additional Equipment Basic Hardware Package: 1 UV lamp unit Lamp type: H-lamp/mercury / Process chamber throughput height: 70 mm top and 70 mm bottom / Usable working width top: 60 up to 450 mm (3 lamps top) / Usable working width bottom: 60 mm up to 450 mm (3 lamps bottom) / Potential-free contact for switching in of external exhaust system / Machine control, includes industrial PC (EMV-secured) / Password protection/ Monitoring of transport speed / Monitoring exhaust air with separate sensor (safety monitoring) / Main contactor control / Emergency switch control / Inlet height: Standard 950 mm +/- 20 mm / Network connection: Standard Ethernet / Power supply: 3~N, PE 230/400 V, standard 50 Hz / Software languages: Standard German, English, Rumanian, Swedish, Italian, Spanish, Chinese, Hungarian / Manual, mechanical drawings, and circuit diagram via USB-stick (German-speaking area: German, all non German-speaking countries: English) This SMT UV 3/-3 was manufactured in 2023. It features a UV lamp unit with a throughput height of 70 mm, both top and bottom, and a working width ranging from 60 to 450 mm. The machine includes an industrial PC, network connectivity via Ethernet, and supports multiple software languages. If you are looking to get high-quality UV processing capabilities consider the SMT UV 3/-3 machine we have for sale. Contact us for more information about this machine. Application Types Fpodpfex D Hfxsx Ag Djr Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2022, operating hours: 15,385 h, General Data Machine weight 14500 kg Control Unit Brand SIEMENS Model S840D sl Main Drive Spindle speed range 12000 Tool taper HSK-T63 Number of axis 6 Fedpfx Agjx D Efde Dspr Turret Number of turrets 1 Tools Number of station 18 Additional Equipment Equipped with Renishaw RLP40 probe, parts carrier, Breuning bar feeder, LTA oil mist separator, Hydac cooler, Knoll KF 150 paper filter, 2x Hainbuch TOPlus mini chuck, various Hainbuch clamps, 95x HSK-T63 tool holder. This 6-axis Index G220 turn-mill centre was manufactured in 2022. It features a Siemens S840D sl control system, a milling spindle with a capacity of 12,000 rpm, and a turret with 18 positions. The machine includes a Renishaw RLP40 probe, Breuning bar feeder, and an LTA oil mist separator. Consider the opportunity to buy this Index G220 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Year of construction: 2023, operating hours: 4,976 h, condition: ready for operation (used), General Data Measurements width 3250 mm Measurements depth 2100 mm Measurements height 2150 mm Fpjdpjx D Nfnsfx Ag Dor Control Unit Brand FANUC Model 31i-B Main Drive Number of axis 4 Movement X-Axis Movement 370 mm Z-Axis Movement 800 mm Workpiece Workpiece weight 150 kg Additional Equipment Equipped with: Measuring probe, Kraft & Bauer fire extinguisher installation, LTA oil mist separator, DGS paper filter, motorex/Ritter & bader coolers, grinding wheels, documentation This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2023. It features a distance between centers of 650 mm, center height of 175 mm, and can handle a maximum workpiece weight of 150 kg. Equipped with a Fanuc 31i-B control system, it also includes a measuring probe, fire extinguishing system, oil mist separator, and coolers. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. Application Types Grinding