Used Segmental Saw Blades for sale (9,275)

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 104000031, The machine is in very good condition. Ledpfx Afjx I Rtqsfeak

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, Laodpfxexvc Dhs Affjk 5.5 kW vario motor, speed adjustable via frequency inverter, Maximum blade diameter 500 mm, LED lighting for the scorer, Used machine, in very good condition, Few operating hours.

Condition: used, Year of construction: 1980, total width: 5,300 mm, total length: 7,300 mm, total height: 2,100 mm, The machine has been dismantled and is in storage. Laedpfxoxr Rpwo Affsk

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Edging saw Esterer DKV-5S The machine has already been dismantled Year of manufacture: 1981 55 kW saw motor Lsdpfeuy Ib Ijx Affeak Without electrical installation With extraction system ASV/B Year of manufacture: 1981 The machine is being sold as is.

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Ledpfxow Edigo Affoak Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, Fully automatic metal band saw with NC control, single mitre 90° – 45° – 30° Used machine – fully functional, refurbished Lsdpox I A Iyefx Affjak Standard features: • NC control with digital display (99 programs with 99 sets each) • Torsion-free cast iron saw frame, hydraulically operated • Infinitely variable feed rate adjustment via control valve at the operator panel • Powerful band drive via industrial electric motor; 2 band speeds for optimal cutting results • Operating sequences (including fault messages) are digitally displayed • Hydraulic feed, single stroke feed length 600 mm; max. feed length 9999.9 mm • Hydraulic clamping of the workpiece via short-stroke cylinder (preset via handwheel) • Floating feed vice to compensate for material irregularities • Large-diameter band wheels and three-sided carbide band guides and band guide rollers ensure long service life of the saw bands • Electric band tension monitoring with saw blade breakage control • The machine operates with a 27 mm saw blade, available in various versions for processing a wide range of materials • Saw band is tensioned manually • Sturdy base frame with coolant tray and coolant pump • Coolant pump with dual supply to the band guides, individually adjustable • The machine is equipped with a high-performance hydraulic unit • All electrical/electronic controls operate at low voltage in accordance with EU directives! Scope of delivery includes: • Electronic height adjustment • Cutting pressure regulation • Bi-metal saw band M 42 • Rotating chip removal brush Technical data: • Cutting range: 90° round: 240 mm ; rectangular: 290 x 240 mm ; square: 240 mm 45° right round: 200 mm ; rectangular: 200 x 240 mm ; square: 200 mm 30° right round: 110 mm ; rectangular: 140 x 110 mm ; square: 110 mm • Drive power 1.1/1.5 kW / 400 V / 50 Hz • Total connected load 4.9 kVA • Band speed 40 and 80 m/min • Saw band 2910 x 27 x 0.9 mm • Remnant piece length 80 mm • Smallest Ø 5 mm • Material support height 770 mm • Dimensions 1980 x 1750 x 1470 mm • Weight 651 kg

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 NR.27968 Stepless speed from 15-2350m/min 4 gears Band welder BSSO25 Air pump Work light Ljdpfxeviym Dj Affeak Grinding stone Table swivels left15°-right45° Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Weight approx. 700kg

Condition: like new (used), Altendorf F45 EvoDrive CNC panel saw, 320 cm sliding table, Lsdpfox I D D Nox Affoak motorized tilt and height adjustment of the saw blade, motorized right-side fence adjustable up to 1000 mm, motorized position indicators on the fence rail on the carriage, 3-axis scorer, electrically adjustable, 5.5 kW vario motor, speed adjustable via frequency inverter, max. blade diameter 550 mm, LED lighting for the scorer, machine from 2023, condition like new.

Condition: used, functionality: fully functional, Large wall saw Lasdpfx Ajx I A D Ioffjk

Condition: new, Year of construction: 2025, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer. Laedpoxdciasfx Affek

Condition: excellent (used), functionality: fully functional, Catalogue number: 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max saw blade diameter for multi-rip saw: 350 mm - Blade bore diameter: 80 mm - Max cutting height for edger: 100 mm - Max cutting height for multi-rip saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm Top section: - Kickback devices - Sliding pressure roller, metal - Kickback devices - Sliding pressure roller - Saw shaft - Sliding pressure roller - Sliding and pressure shaft, metal Bottom section: - Guide bar - Kickback devices - Track - Central lubrication - Infinitely variable feed speed adjustment - Electric saw shaft lifting 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw adjustment 0.55 kW - Lasers (not functioning, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L x W x H): 2200 x 1450 x 2000 mm - Weight: 1925 kg Lodpfxswrn Dne Affoak ADVANTAGES – German-made – Shaft with floating blade for edging – Includes additional sleeve for multi-rip saw – Used multi-rip saw, condition: very good Net price: 58,900 PLN Net price: 14,000 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Horizontal panel saw HOMAG HPP300/43/43 Profi Lsdpox I Aycefx Affsak Vacuum loading excluded Cutting width: 4300 mm Cutting length: 4300 mm Max. projection of main saw blade: 125 mm 8 clamping grippers

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 45100 € 861.41 € Doppelsäulenführung 5200x34x1,1 mm 20-100 m/min 360 mm 360 mm 610x360 mm rund 360 mm, quadrat 360 rund 360 mm, quadrat 360 rund 325 mm, quadrat 265 735 mm 1.5 kW 3 kW 0.12 kW 2850 mm 2250 mm 1870 mm 2400 kg NC control double column band saw on linear guidelines Ljdpowirhxsfx Affoak 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Laodpfx Aov Dtuqeffsk Weight 650 kg

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR Lodpfjxhcrpjx Affoak (Prices subject to change with stronger fluctuations)

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Laodpfoxdbzbex Affek Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm Laedpfxowtqbfj Affek - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers Lasdpfx Afexvb Hzofek From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Lodsxft Dwopfx Affoak Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm Laedjxvb Sdepfx Affsk - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm Lasdpfx Aodpdcvsffek - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7513 Ljdsvfp Iijpfx Affsak Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm Lsdpfx Afsx Hhxhjfsak - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW Lodpfjx Hhw Rox Affjak - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7845 TECHNICAL DATA - track width: 240 mm - shaft width: 230 mm - max. blade diameter: 350 mm - blade bore diameter: 80 mm - max. cutting height: 120 mm - table width with clearance: 700 mm - table length: 1810 mm – from above: - pawls - sliding, pressure shaft: 1 pc - pawls - sliding shaft - shaft with saw blades - sliding, pressure roller: 2 pcs – from below: - guide - infeed, sliding roller - pawls - track - stepless feed speed adjustment: 9–18 m/min - feed motor: 1.5 kW - main motor: 22 kW - extraction outlet diameter: 210 mm - overall dimensions (without guide) L/W/H: 2110x1520x1600 mm - weight approx.: 2000 kg ADVANTAGES – made in Czech Republic – used multi-blade saw – very good condition Net price: PLN 37,900 Net price: EUR 9,020 Lasdpfxsx Hhvge Affek Net price calculated at exchange rate 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)