Used Screen Printing System for sale (45,759)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, warranty duration: 12 months, input frequency: 50 Hz, Usable printing format: 100x140. Maximum frame format: 160x120. Vacuum platen adjustment, horizontal/vertical, with millimeter precision. Adjustment of the rear gap (known as Sincoprint) with a knob located on the front of the machine, within easy reach of the operator. Crjdpfx Aiozqyqhsioi 3-position selector: manual, single, and automatic, with a timer to regulate the time at the end of the printing cycle before the printing head rises. Timer for adjusting automatic operation. Two-function foot pedal: left pedal to start the machine, right pedal to activate the sheet vacuum during registration. Adjustment of the squeegee and counter-squeegee speed with a potentiometer.

Year of construction: 2021, condition: used, machine/vehicle number: 21.067.372, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! MACHINE DETAILS Total meter reading according to display: 1,376,504 (as of 2024) Credpe Agvrrsfx Aiiei EQUIPMENT Computer terminal Note: Accessories are provided without warranty. The principle applies: "Item purchased as is." The prospective buyer must verify the completeness of the item on-site.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Crsdpozqf D Tsfx Aiioi Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: used, Year of construction: 1998, Technical data: Cedpfx Asxnrdhoiiori Material width: min. 100 mm, max. 340 mm Printing width: max. 325 mm Print repeat length: min. 101.6 mm, max. 355.6 mm Machine components: • Corona treatment • Turn bar • 3× screen printing units • Hot foil stamping unit • 1× screen printing unit • Flatbed die cutter • 1× screen printing unit

Condition: used, functionality: fully functional, We are selling our small screen printing machine, which is still in operation, due to downsizing of our machinery fleet. The machine is fully functional and can be inspected. Cjdpfx Asyrbvpjiiori

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage. Cedpfx Aijzl Ennjisri

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). Crsdpfx Aij Ah Tlroioi • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Electric oven with radiant panels Adjustable temperature from 0 to over 200°C. Internal ventilation. Fume extraction system. Cjdpezzpnwefx Aiieri Adjustable belt speed. Radiant panels adjustable in height, ideal for various sizes. Excellent for plastic curing. Belt width: 101 cm Infeed length: 94 cm Outfeed length: 94 cm Total length: 450 cm Total width: 145 cm INSTALLATION POSSIBLE.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Cjdpfx Aiey I Iz Esieri If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Cedpfox H Rybjx Aiijri Table size: 100 x 130 cm Electrical inspection required!

Condition: used, Digital printing system for carpet and textile printing ChromoJet is a valve-based jet printing technology developed by ZIMMER in 1976, and it has since established itself as a reliable solution for carpet printing and printing on heavy textiles. The digital printing systems in the ChromoJet family are suitable for all types of pile products, with a weight range of 300 to 1,500 g/m². ChromoJet operates with high-speed valves. The pre-mixed, pressurized special or process colors are injected deep into the surface of the pile with surgical precision, without any machine parts coming into contact with the fabric. The result is deep color penetration and excellent print resolution. Dye classes: Acid and pre-metallized – for printing polyamide (nylon) and wool Disperse – for printing carpets based on polyester Cationic – for printing modified (cationic) polyester and acrylic fibers Reactive – for printing carpets and mats based on polyamide, wool, and cotton Applications: Floor coverings such as carpets, rugs, carpet tiles, and mats Machine data: Max. material width: 1100 mm Max. printing width: 1150 mm Number of colors: 8 per nozzle type Number of carriages: 1 Crodpeuzgzcofx Aiisi Number of nozzles per color: HSV200: 4 / HSV400: 8 / HSV800: 8 Total number of nozzles: 160 Pattern resolution: HSV200: 1.667 mm dot size HSV400: 1.0 mm dot size HSV800: 0.5/0.33/0.25 mm dot size Electrical data: Connection power: 7 kVA, approx. 10 A Supply voltage: 400 V, 3-phase, 50 Hz Control voltage: 24 VDC Max. short-circuit current: 10 kA You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible. Codpfx Aszk Nbvjiisri

Condition: ready for operation (used), Four identical screen printing machines ESC are available. Rigid material thickness: 200mm, max. print format X/Y: 400mm/600mm, vacuum plate dimensions X/Y: 500mm/700mm, vacuum area dimensions X/Y: 405mm/600mm, max. frame dimensions X/Y: 600mm/940mm, frame profile range: 25mm-47mm, max. print material thickness: 200mm, working height: 960mm, frame lift: 270mm, printing speed range: 125mm-750mm/s, max. cycle rate: 600p/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, working pressure range: 5bar-7bar. Machine dimensions X/Y/Z: approx. 1300mm/1100mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible. Cedpfjy E S Haex Aiiori

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. Codpfx Aiszcn Efeijri BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Condition Used Machine from industrial production Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Crodpfx Aijy A S Rysisi Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Crjdjwqqv Dopfx Aiiei

Condition: used, Year of construction: 1997, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: Screen printing machine - Year of manufacture: 1997 Codpfxoy N Udve Aiieri - Equipment: • Mabeg feeder, model MS • SPS drying unit, type UV Top 1200, year of manufacture 1993 • SPS Rehmus explanation unit, type Autostack S-02, year of manufacture 1993 • Steel platform and checker plate on pallets • Control cabinet • Screen printing frames

Condition: used, 3D SYSTEMS Professional MultiJet 3D Printer / MJP System 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD print modes For sale is a used, professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for producing precise plastic components, functional prototypes, concept models, as well as fixtures and tooling applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Print modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD resolution: 800 × 900 × 790 DPI Layer thickness HD: 32 µm UHD resolution: 1600 × 900 × 790 DPI Layer thickness UHD: 32 µm Dimensions (W × D × H): 1120 × 740 × 1070 mm Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet / USB Equipment: Integrated touch display Material system for build and support material Automatic switching of material cartridges Codpfx Aez Erdaeiijri Network connection USB connection 3D Sprint software support Material containers as shown in the pictures Application areas: Functional prototypes Concept models Form and fit testing Fixtures and holders Tooling applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2013, A Morlock single-color pad printing machine is available. Ink system: cup system, oval print image diameter range: 100mm-250mm, min. cliché print image dimensions X/Y: 100mm/210mm, max. cliché print image dimensions X/Y: 250mm/280mm, ink cup diameter: approx. 80mm, pressing force range: 1100N-1500N, max. cycle rate: 1400-1800 cycles/h, machine dimensions X/Y/Z: approx. 1050mm/500mm/650mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Cedpfxexd Av He Aiijri

Condition: used, Logopak 920 II PF Pallet Labeling System Manufacturer: Logopak Pallet Labeling System Model: 920 II PF Your advantages at a glance: Top speed (up to 240 pallets/hour) Fewer roll changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Print engine quick-change system Thermal direct or thermal transfer printing for labels up to A3 Internal database, error diagnosis, and many other features Functions as a stand-alone solution or integrated into the network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick aluminum die-cast housing with solid steel hinge plates was specifically developed for continuous operation in harsh industrial environments. The printer can be controlled externally via a serial interface or, thanks to its integrated intelligence, operated as a stand-alone device. SPECIFICATIONS Crodpjw U Tc Tefx Aiioi Printing speed: 150 mm/s Core diameter: 50 mm/76 mm Label roll diameter: 180 mm Font size: 2 mm – 50 mm Printing direction: Rotatable by 90°, 180° and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network-compatible Memory (RAM): 1 MB battery-buffered CMOS memory, expandable to 8 MB Ambient temperature: 5 °C to 40 °C Dimensions (W x L x H): 700 mm x 500 mm x 400 mm Weight: approx. 50 kg Housing: Painted steel Integrated intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal item database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbps) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a higher-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2026, DIABERG SPECTRA — Automatic Screen Printing & Finishing Line A configurable sheet-fed finishing line combining automatic screen printing with UV curing, cold foil and holographic laser-transfer processes. Machine configuration Automatic sheet feeder with sheet-position and feeding-fault detection. Drum-stop cylinder screen-printing unit. Adjustable screen registration and squeegee settings. Touchscreen controls with physical operating buttons. Centralized lubrication for the printing unit. Connected finishing module configured for the selected processes. Automatic sheet collection with alignment, pile-height adjustment and counting. Selectable finishing functions Process Configuration Spot UV Screen-applied UV varnish with UV curing Crjdj Ahduuepfx Aiiji Cold foil Screen-applied adhesive with foil-transfer and curing equipment Laser transfer UV transfer varnish with holographic-pattern transfer and curing Wrinkle effects Compatible screen-printing ink with wrinkle-activation and curing lamps The combined configuration supports different finishing modes. Process settings and production sequences are selected for each job. Reference technical specifications Parameter Catalogue reference Maximum printing area 1,050 × 750 mm Minimum sheet size 560 × 350 mm Printing-unit speed 1,000–4,000 sheets/hour Printing-unit paper range 90–350 g/m² Transfer-module paper range 157–450 g/m² These are individual module specifications. Complete-line material compatibility and operating speed depend on the selected process, matched equipment and sample trials. Optional equipment Water-cooled air-cooling section. Servo-controlled squeegee pressure adjustment. Alternative feeder arrangements matched to the substrate. Configuration enquiry Please provide your required sheet size, substrate, grammage, finishing effects and production target to receive a matching machine configuration and technical quotation.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: Credpfszdnnuex Aiisi VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: ready for operation (used), A compact screen printing machine Thieme is available. Print dimensions X/Y: 750mm/1050mm, max. screen frame dimensions X/Y: 1200mm/1400mm, max. print material height: 40mm, squeegee speed: 75m/min, printing speed: 950cycles/h, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1350mm, weight: approx. 700kg. An on-site inspection is possible. Cjdpfx Aioy Duqroieri

Condition: used, 3D Systems Type: ProX™ 800 ProX™ 800 3D production printer from 3D Systems – high-performance SLA printer The system has been regularly maintained. Operating hours: 18,700 (as of April 18, 2023) Not in operation after April 18, 2023. Note: Annual maintenance performed until decommissioning. For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with state-of-the-art print head technology and is suitable for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology). Additional features: Automatic material replenishment system and pre-configured material supply module (fast module change, uninterrupted operation) 3D-Manage™ software for CAD model and print job control Touchscreen control on the device (Print3D Pro™) Status/signal light module, central user guidance Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and locking mechanisms Detailed maintenance and troubleshooting functions Material container (MDM) Technical data: Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) Maximum build volume: approx. 650 × 750 × 550 mm Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm Weight: approx. 907 kg Resolution: up to 0.00127 mm (laser spot size), 4000 DPI Accuracy: ± 0.025–0.05 mm per inch Materials: wide selection of Accura resins (durable, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: single-phase connection Fuse: 30 A Weight: approx. 1200 kg including material module Csdpozii Umjfx Aiisri Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2007, SPS Vitessa Star G2 Year: 2007 Maximum format: 75 x 105 cm Minimum format: 32 x 44 cm Maximum speed: 4000 sheets/hour Csdpfx Aisz Ad A Esijri Dryer In production Available immediately