Used Scm Tf 110 Nova for sale (625)

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Bdjdpfx Asd Etkhedrjd Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Bdsdpjiknp Refx Adrjd Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: new, Work table adjustment in the infeed using a parallelogram system Display for chip removal via a degree scale Simultaneous height adjustment and locking of the work tables, complete with anti-tipping device Quick changeover system for switching from planing to thicknessing (CE version) via a special support for opening the planing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic support "READY" Electronic control includes: – Adjustment of the thickness table – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hour counter Automatic star-delta starter for the main motor Machine table with height adjustment via 4 steel leadscrews Rubber-coated infeed roller in the outfeed Interchangeable feed rollers Segmented pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro-safety switch for correct positioning of the planing tables and extraction hoods Planing guard (CE version) Automatic motor brake on the main motor Thermal overload switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data: Usable working width [mm] 520 Total table length [mm] 2310 Knife shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planing shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminum planing fence [mm] 1200 x 190 Planing fence angle adjustment from 90° to -45° Min./max. Bsdpfsd Akyzjx Adredd Planing height [mm] 3 / 250 Feed speed, thickness [m/min] 5-8-12-18 Extraction hood diameter, planing [mm] 120 Extraction hood diameter, thickness [mm] 120 including options - "TERSA" knife shaft with disposable, reversible knives - pivoting auxiliary fence for thin workpieces

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Bdedpfx Adjdvn Hworod Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Bdsdpfx Adeiiv Dcjred Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM Bdsdpfxog Umrme Adred 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min OPTIONAL Bdsdpfx Ajc S Di Rsdrjd device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Bodpfxeiiynnj Adrsdd Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Bdsdpfofh Tmmsx Adrsd Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Bdjdozh Hwvepfx Adrod

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS Bedpfx Ajxqggcedrjdd 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Bsdpfjitvkuex Adrsdd Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Bdodpfx Adehtuvrsrsd Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces Bedpsd E Ixzjfx Adrjdd • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2016, operating hours: 5,613 h, total height: 2,350 mm, total length: 4,300 mm, total width: 1,880 mm, Colour: Grey Empty weight: 1.310 kg Bdjdpfszh Hkcex Adrjd - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Operating hours: 5613 - Main motor power [kW]: 5.5 - Number of controlled axes [pcs]: 1 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Working range Z [mm]: 60 - Number of milling spindles [pcs]: 1 - Tool holder interface: ISO30 - Max. spindle speed [rpm]: 18000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 35 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 12 - Max. drilling depth [mm]: 60 - Manual operation: Yes - Control: SCM Xilog - Software: Xilog Plus - Saw unit present: Yes - Safety feature: - Spindle speed control: Continuously adjustable - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: Bdsdpfjyftzksx Adrjd • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm Bsdpfxodibw Aj Adredd min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 Bjdpfxecrnm Ne Adrjdd squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm Bsdpehvan Isfx Adrsdd weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2010, operating hours: 540 h, condition: ready for operation (used), travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 250 mm, overall weight: 2,000 kg, number of axes: 4, This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details. Bsdey Dd R Ijpfx Adredd • Electrical: 400 V, 3 + N, 33 A, 50 Hz, breaking capacity 10 kA • Control: Xilog Plus • Machining units: saw unit (included), horizontal boring unit (included), routing spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double posts) 1210 mm • Max travel speed: 60 m/min • Clamping system: pneumatic locking bars; number of clamping bars: 6 • Suction cup sizes: 120x120 mm and 55x120 mm • Machine on: 5.500 h

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made Bdodpfszhu A Tsx Adrsd – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW Bdsdpfx Adszab Eysrjd 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via inverter - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: used, Spindle moulder SCM T130 NPS - used - fine-adjustable fence, tenoning and slotting table, Bsdpfx Adsw Nv Nfsrjdd right-/left-hand rotation ----- Technical Data ----- Table size: 1,080 x 750 mm, Spindle diameter: 30 mm, Speeds: 3,000/4,500/6,000/7,000/10,000 rpm, Extraction port Ø: 120 mm, Lower extraction port Ø: 120 mm

Condition: used, Thickness planer SCM S 63 - used - Bsdpfx Ajxm R Uvodrodd Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Bdjdpfx Adsy Dhudorsd