Used Scm Si 3200 for sale (609)

Condition: new, Year of construction: 2022, Work table dimensions mm 1950 x 180 Min. ÷ max. thickness of rolled edges mm 0,4 ÷ 2 Max. thickness of edges in strips mm 5 Min. ÷ max. panel height mm 12 ÷ 50 Min. panel length/width mm 180/65 Feed speed m/min 6 Dedsygtr Sjpfx Ac Njun

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Duodpfxsxy Tmne Ac Nsn

Condition: new, Year of construction: 2023, planing width: 520 mm, height adjustment type: electric, overall weight: 483 kg, planing height: 240 mm, planer shaft diameter: 120 mm, number of blades: 4, power: 7 kW (9.52 HP), SCM MiniMax s 52es thicknesser Specifications: - condition - new - manufacturer - SCM - width of the thicknesser table - 520 mm - length of the thicknesser table - 850 mm - minimum thickness of the element - 3 mm - maximum thickness of the element - 240 mm - maximum thickness of the thicknesser harvest - 5 mm - motor power - 7 kW - supply voltage - 400 V - shaft for 4 conventional knives - diameter of planer shaft - 120 mm - rotational speed of the planer shaft - 5000 rpm Dsdpfx Acequ U Dne Neun - maximum planing width - 520 mm - feed speed - 5 / 8 / 12 / 18 m/min - diameter of the exhaust stub - 120 mm - weight (net) - about 493 kg - overall dimensions - 144 x 108 x 110 cm ( W x L x H ) Additional information: - machine brand new - pictures show the actual state of the object of sale - possibility to turn on and check the machine on site. - the price given in the auction does not include VAT and transport costs - available from stock in Italy

Condition: good (used), Code: 0277 Brand: SCM Model: S 520 - CE Standard Automatic thickness planer for wood, carpentry shops, custom-made furniture, furniture factories, sawmills, woodworking shops, wood window frames, shipyards, plastics, composite materials and various - CE Standard Technical data: TERSA shaft with 4 knives Working width mm 520 Max working height mm 250 Min working height 3 mm Min working length 210 mm Automatic table lifting Feed speed 5-8-12-18 mt/min Motor Hp 5,5 Suction inlet diameter 150 mm Overall dimensions mm 1050 x 1000 x 1050 h Weight kg 650 Dodpfx Ajx Ivfrec Neun

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Type of Offer: Lease return, used machine Availability: Immediate Location: In stock Condition: As new Year of Manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebanding machine for small and medium-sized companies, capable of processing a wide range of materials to a high standard of quality in a compact footprint. The SCM Olympic 500 features an electronic setting device and allows processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with 'Maestro active edge' HMI software • Maestro connect: prepared for later installation without gateway • 2-radius processing, chamfering on all units with multi-edge tooling - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm • Electronic positioning of the pressure beam OPTIONAL MACHINE EQUIPMENT: Dusdpfxoq A Tyzs Ac Nen Workpiece spacer at infeed KIT "SAV€NERGY" Internal lighting for the enclosure and gluing area “Nesting” sensor roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing cutter unit "RT-V1" “EASY SIZE” device – electronic quick adjustment of the jointing cutter unit Glue unit "VC-VM" SGP glue pot for EVA & PU incl. quick-change system Ceramic infrared preheating lamp for workpieces Electronic positioning of all pressure rollers End trimming unit "K-2 Radius" Chamfer and radius milling unit "R-HP Multiedge 2R" Corner rounding unit "Round 2-A Multiedge 1R" KIT 'MULTIEDGE 3' – automatic position change straight/ R/R, for "Round 2-A Multiedge 1R" unit Radius scraper unit "RAS-HP Multiedge 2R" Flat scraper unit "RC-N" Buffing unit "SP-V" MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE – LEASE RETURN!!

Condition: used, Year of construction: 2012, Available upon agreement Machine Design: Gantry-type stationary machine Machining size in X-direction: 3548 mm Machining size in Y-direction: 1350 mm Machining thickness (Z-axis): 160 mm Number of main spindles: 1 unit Main spindle power: 11 kW Main spindle speed: 1,200–20,000 rpm Clamping system: HSK-63 F Spindle cooling: liquid cooling Number of axes: 5 Tool changer: disc type Tool changer positions: 12 units Rear wall slotting unit: Yes Vertical drilling spindles - X-direction: 10 units Vertical drilling spindles - Y-direction: 8 units Vertical drilling spindle speed: 6,000 rpm Horizontal drilling spindles in X-direction: 2+2 units Horizontal drilling spindles in Y-direction: 2+2 units Horizontal drilling spindle speed: 6,000 rpm Control type: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog DXF interface: Yes CD-ROM drive: Yes Table design: console table, tubeless Positioning system: cylinder stops for veneer Support arms: 6 units Suction cups: 18 units Dujdpfoygm Dhjx Ac Njn Traversing rails: 4 units Number of vacuum pumps: 1 unit Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety fence left: Yes Safety fence right: Yes Safety fence rear: Yes Extraction hood: axis-controlled Setup assistance: laser point positioning aid Safety features: bumper Central lubrication: automatic Tools: available at extra cost Approx. weight: 6,500 kg Extraction diameter: 200 mm Further descriptions and images available upon request Location:

Condition: used, Year of construction: 1993, Used window production line, primarily utilized for historical window manufacturing (mostly Alt Wien profile). Sold as seen. Further information and price on request, EXW. Dodpfx Ajygh H Dsc Nsun

Condition: good (used), Year of construction: 2015, functionality: fully functional, edge thickness (max.): 12 mm, ENGLISH: Heavy duty edgebander OLIMPIC (SCM Group) in rich configuration suitable for custom made and series production. Machine is equipped with aggregates with servomotors (ABS R1+R2mm + thin edge + solidwood). Model: Olimpic K800 TERL Manufacturer: SCM Group Production year: 2015 State: good Edgebanded edges: 238.800 meters Main technical parameters: - feeding speed: 12/18 m/min. (including rounding) - panel thickness: 10-60 mm (including rounding) Equipment and configuration of the machine: - control panel with LCD touch screen STARTOUCH - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment - glue pot with quick change of the glue color Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter) - glue pot with roller "VC/1000" (glue pot with quick-release system) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit "K/SEL" with pneumatic tilting of the blades - radius trimming unit "RI/800" R1mm + thin edges + solid wood (12mm) (3 position pneumatic kit) - 2 motor rounding unit "ROUND K MULTI EDGE" R2mm + thin edge (each motor has: 2 electronic axis with servomotor) - radius edge scrapers "RAS/S 2P" MULTI-EDGE R1+R2mm (each unit has: 2 electronic axis with servomotor) - cleaning spray - glue scrapers "RCA/2C" Dusdpfx Aswxt Tbec Nsn - brushes"SP/F"

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Djdet R T Hcepfx Ac Neun Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Djdpsygddljfx Ac Noun Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Dodpfx Ajw Dcccjc Nsun

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Duodpfjw Dcb Ssx Ac Njn

Condition: excellent (used), Year of construction: 2018, SCM Wide Belt Sander dmc sd 60 DMC60 RCS 110 AB /00003689 European safety regulations (CE marking) Voltage 400 V EU Frequency 50 Hz Sanding width: 1100 mm Version "B" for RCS Infeed and outfeed roller table for long workpieces Electronic programming unit "LOGIC SC" "RA" obliquely ribbed steel contact roller – 1st unit 2nd unit sanding pad unit Main motor 15 kW (20 HP) Dusdpfex Nrwmjx Ac Non Location: at customer site - immediately available -

Condition: new, Year of construction: 2023, functionality: fully functional, DMC SD 30 RCS 110 - Automatic Wide Belt Sander Dsdpfx Aew Rpf Nsc Neun New ex-demo machine, under warranty, has not been used, unpacked from foil Technical Specifications: - Working width: 1,100 mm - Min./max. working thickness: 4/170 mm - Abrasive belt width: 1,115 mm - Abrasive belt length: 1,900 mm Configuration: - Equipped with 1 "R" unit (roller) and 2nd combined "CS" unit (roller/pad) - "C" version for RCS 110: • Pneumatic actuator activating the roller of the first "R" unit • Pneumatic actuator activating the roller of the second "CS" unit • MESAR electronic segmented pad with 20 sections • Electronic adjustment of the worktable height - Compliant with European safety regulations (CE standards) - R120/ steel calibration roller, 120 mm diameter, in first position - R140/65 – 65 Sh rubber grooved roller, 140 mm diameter, in second position - Electronic ammeter for the main motor to monitor power consumption - Electronic display of working thickness - Electronic oscillation of abrasive belts - Rubber pressure rollers - Vertical infeed roller on the first unit to prevent sudden ejection of workpieces - 60 Sh rubber feed belt - Infeed and outfeed support rollers (2 rollers each) - Automatic device for centering and tensioning of feed belt - Main motor power: 11 kW (2 speeds) - Oscillating nozzle system for blowing dust from the abrasive belts of the first and second unit with timer control - Variable feed belt speed via inverter: 0.75 kW (3.5–18 m/min) - “EYE-S” electronic programmer for machines with electronic segmented pads • 10'' touchscreen display

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Djdpfxox Nv S Ue Ac Nsun Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: used, machine/vehicle number: 007113, Type of edging: Thin edge, Thick edge, Solid wood Duodjrl Ur Tjpfx Ac Njn Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 22 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2018, Price: On request CNC machining centre SCM ACCORD 25 FX Brand SCM Type ACCORD 25 FX  Year of construction 2018 Machine no. AA10000992 Machining table dimensions 5020x1380 mm (LxW) Worktable equipped with 2 vacuum fields Worktable equipped with 2 reference lugs Including 8 reference lugs and 8 supports  Speed XY, vector 35 m/min Movement axes Maximal speed X axis 25 m/min (pro space) Maximum speed X axis 90 m/min (pro speed) Maximum speed Y axis 90 m/min Maximum speed Z-axis 30 m/min Control unit Machine control KVARA control Windows Embedded Standard 7-64bit Hard disk storage capacity 500GB-7200rpm Microprocessor Intel Pentium-2.9GHz RAM memory 8GB-DDR4 XILOG-MAESTRO software package Including vacuum pump  Motor power 5.5 kW Pump capacity 250m3/hour Vacuum pressure maximum 0.9 bar Total dimensions 9000x4500x3000 (LxWxH) Total weight 7,500 KG.  - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: AA10000992 - Type milling table: Beam table - Vacuum pump present: Yes Dusdsycwupspfx Ac Non Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg Dodpfx Acewnicke Njun - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Duedpfxsx A E Tfj Ac Non Total number of tool changer positions: 15

Condition: excellent (used), SCM F520 CE leveling machine Working width 520mm 4kw motor 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm Dujdendhdtopfx Ac Nsn CE certificate

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- Duedsyclwxepfx Ac Nen - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Dujdpsyclwlefx Ac Njn Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) Dsdpoyclwfofx Ac Neun -----...

Condition: excellent (used), functionality: fully functional, SCM R9 Overhead Spindle Moulder - after technical inspection, ready for operation Specification: • Condition – used, inspected • Manufacturer – SCM • Model – R9 • 2 spindle speeds, belt-adjustable • Manually adjustable table height • Depth stops for different drilling depths • Head lowering controlled by foot pedal • Star-delta starter • Overall dimensions 155 x 95 x 170 cm (L x W x H) Additional information: • Very good technical condition • Photos show the actual condition of the item for sale • Possibility to power up and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing and transport: Dedpfx Acsyf N Rzj Nsun • We arrange transport by MDD fleet, courier companies, or external carriers • Financing support available, including leasing or lease loan options

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture – Electric thickness display Dodeycihbspfx Ac Njun – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)