Used Scm F 410 for sale (653)

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Main technical parameters: - max. cabinet dimensions: 2500 x 1250 x 650 mm - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min - working height: 600 mm - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) Itjdpfezgtg Iex Ahbsn - setting of the exact position of the middle side pressers

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Iedpfxozxchlj Ahbjtn Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: AA10000992, functionality: fully functional, TECHNICAL DETAILS Table length: 5,020 mm Table width: 1,380 mm Working area X-axis: 5,020 mm Working area Y-axis: 1,300 mm Working area Z-axis: 250 mm Travel range X-axis: 5,400 mm Travel range Y-axis: 1,650 mm Travel range Z-axis: 450 mm Vector speed X/Y: 35 m/min Maximum speed X-axis: 25 m/min (?) Rapid traverse speed X-axis: 90 m/min (?) Iodpfx Ahjzrmqkebjtn Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Number of milling spindles: 2 pcs. Tool clamping system: HSK-F63 Milling spindle 1 Controlled axes: 3 pcs. Spindle speed: 6,000–18,000 rpm Main motor power: 15 kW Milling spindle 2 Controlled axes: 3 pcs. Spindle speed: 600–24,000 rpm Main motor power: 12 kW Tool changer positions: 12 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 9,000 x 4,500 x 3,000 mm Total weight: 7,500 kg Machine control: KVARA Operating system: Windows Embedded Standard 7, 64-bit Processor: Intel Pentium, 2.9 GHz RAM: 8 GB DDR4 Hard disk storage: 500 GB, 7,200 rpm Software: XILOG MAESTRO / SCM Maestro Vacuum pump Manufacturer: Becker Number: 1 pc. Motor power: 5.5 kW Suction capacity: 250 m³/h Maximum vacuum pressure: 0.9 bar EQUIPMENT Sliding table 2 vacuum fields 2 reference cams 8 reference noses 8 supports Becker vacuum pump Safety bumper XILOG-MAESTRO software package CE marking

Condition: like new (used), Year of construction: 2014, functionality: fully functional, planing width: 510 mm, number of blades: 4, overall weight: 715 kg, total length: 2,725 mm, blade shaft diameter: 120 mm, height adjustment type: mechanical, roll width: 120 mm, table length: 2,725 mm, Equipment: motor brake, SCM F2 F520 Planer Jointer Surfacer – LIKE NEW! Surface planer from renowned brand SCM. The machine is in excellent technical condition. Fully serviced. Italian manufacturer. TECHNICAL SPECIFICATIONS: - Maximum planing width: 510 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Motor: 5.5 kW - Infeed table length: 1495 mm - Outfeed table length: 1175 mm - Total table length: 2725 mm - Adjustment of infeed and outfeed table heights Isdpexxm Sbefx Ahbstn - Fence: 190 x 1200 mm - Fence angle adjustment - Safety switch - Power supply: 400 V - Cutterblock silencing - Cutterblock guard - Year of manufacture: 2014 - Operating manual (DTR) MACHINE DIMENSIONS: - Length: 2725 mm - Width: 900 mm - Height: 1200 mm - Weight: 715 kg Financing options available: leasing or installments. Simply visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you view our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Machine transport available across Europe and beyond! Tel: 664 335 465 Tel: 530 632 386

Condition: excellent (used), Catalog number 8130 TECHNICAL DATA PLANER: Itedpfo Aaarhox Ahbjn - roller width 410mm - 3-knife roller - silencing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESSER: - max thickness of workpiece in the thicknesser 240mm - thicknesser roller guard - from above: - pawls - infeed roller, toothed, helical - pressure rollers - planing roller - outfeed roller, smooth - main motor 3.7kW - 2 types of rotation speeds - manual table adjustment up/down - diameter of dust extraction nozzle 120mm - dimensions L/W/H 2000x900x1120mm - weight 550kg ADVANTAGES - Made in Italy - silencing comb - longer infeed table - unpainted - very good condition - used planer-thicknesser Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg Isdpfey Hl Iyox Ahbetn - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: Iodpfx Aszdlabehbstn - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AB/224221, functionality: fully functional, operating hours: 19,402 h, working width: 900 mm, milling spindle speed (max.): 18,000 rpm, working length: 3,050 mm, Equipment: CE marking, TECHNICAL DETAILS Working area, X-axis: 3,050 mm Working area, Y-axis: 900 mm Working area, Z-axis: 60 mm Iedezrmn Nepfx Ahbotn Controlled axes: 1 Milling spindle Number of milling spindles: 1 Max. spindle speed: 18,000 rpm Main motor power: 5.6 kW Tool clamping system: ISO 30 Table design: Flat table Table length: 3,960 mm Table width: 840 mm Material clamping system: Pneumatic Drilling unit Motor power: 2.64 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 11 MACHINE DETAILS Software: SCM Maestro Voltage: 400 V Current consumption: 35 A Fuse rating: 63 A Connected load: 10.0 kW Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 1,900 x 2,250 mm Transport dimensions (L x W x H): 2,500 x 1,900 x 2,250 mm Transport weight: 1,600 kg Transport packages: 1 Operating hours: 19,402 h EQUIPMENT Tools Documentation CNC documentation on USB stick User keys/licenses CE marking Saw unit Door interlock switch Safety light curtain Drilling tool

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Itedpfxszq Ur To Ahben Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Year of construction: 2017, condition: ready for operation (used), Other (Wood) machine manufactured in 2017. This SCM Superfici Mini features a working width of 1,300 mm and a maximum workpiece thickness of 90 mm. It operates at a feed speed of 1–3 m/min and includes a hybrid conveying system with a paper protecting device and lacquer reclaiming unit. If you are looking to get high-quality woodworking capabilities, consider the SCM Superfici Mini machine we have for sale. Contact us for further details. Ijdpfx Ahsz Izpkobetn • Working width: 1,300 mm • Max. workpiece thickness: 90 mm • Working height: 900 mm • Feed speed: 1–3 m/min • Conveying system: Hybrid with paper protecting device and lacquer reclaiming unit • Electronic control: Standard PLC

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Itodszlw Rnspfx Ahbjn Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), number of blades: 4, Surface planer SCM SF520, table length 2700mm, with 4 cutterblocks. Ijdjzxbcbopfx Ahbotn

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 Isdpfx Ahezmtldobetn TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- Itedpfewwl Nlex Ahbjn First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Itjdpfx Aoy A Hh Tjhben Weight: 980 kg

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Ijdpfxet Hal Dj Ahbetn Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg year of manufacture 2001 Itedpfx Ahjzx U Nujben can be purchased without feed unit

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES Itodpfxjn Dw N De Ahbjn instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 OTHER Surface Planer machines available as in photos

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment Iodpfjzug Sgex Ahbotn • Anti-adhesive and polishing liquids

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 80 mm, number of axes: 3, overall weight: 5,200 kg, spindle motor power: 7,500 W, spindle speed (max.): 24,000 rpm, This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details. • Number of milling spindles: 2 • Tool clamping system: HSK-F63 Ijdpjzuhcgjfx Ahbjtn • Vertical drill spindles: 96 • Horizontal drills (X/Y): 32 / 4 • CE mark Additional equipment • Barcode reader • Enclosed fence • Light barrier • DXF interface • Software: SCM XILOG PLUS

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Isdpfez Ngglex Ahbotn

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Ijdpfx Aezvwnbshbjtn Number of controlled axes: 3 axes Total number of tool changer positions: 16

Condition: new, Year of construction: 2026, Spindle Moulder SCM / CASADEI F 25 M LL FK Robust professional woodworking machine with spindle tiltable ±45° to both sides and MK4 interchangeable spindle Article number: 5220730 Brand: Holzkraft CASADEI - Heavy-duty steel/cast iron construction - Dynamically balanced cutter unit anchored to the work table - Especially robust design - Smooth running thanks to precision units and high dead weight - Standard with forward/reverse operation and electronic lockout during rotation reversal Itsdpfx Ahjy Ehcdjben - Five speeds from 3000 to 10000 rpm - Convenient speed change from machine side - Standard MK 4 interchangeable spindle system - Large precision-ground cast iron work table for lasting accuracy - User-friendly controls and speed display on the front of the machine - Large-format spindle fence with fine adjustment and aluminum fence jaws standard - Fence adjustment via crank handle - Numeric display of set spindle height accurate to tenths - Powerful industrial motors TECHNICAL DATA Dimensions and Weights Net weight approx.: 510 kg Dust Extraction Number of outlets: 2 Outlet diameter: 80 mm Number of fence outlets: 1 Fence outlet diameter: 120 mm Work Table Table length: 2500 mm Table width: 810 mm Table height: 923 mm Placement Information Space requirement explanation: Dimensions include max. travel distances or working lengths Working area length: 3700 mm Working area width/depth: 5000 mm Working area explanation: Please add the specified dimensions to the space requirement to get the recommended free footprint for the machine Electrical Data Connection voltage: 400 V Network frequency: 50 Hz Drive motor power: 7.0 kW Spindle Spindle tilt: -45° to +45° Usable spindle length: 140 / 180 mm (for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm) Spindle stroke: 90 mm Interchangeable spindle: MK 4 Spindle speeds: 3000/4500/6000/8000/10000 rpm Maximum Tool Diameter Max. retractable tool diameter: 320 x 60 mm Max. profiling diameter: 250 mm Max. tenoning diameter: 350 mm Max. moulding diameter: 160 mm EQUIPMENT - Spindle fence: Heavy-duty professional version with aluminum jaws and fine-adjustment, adjusted from the front via crank handle with numerical digital display - Curved workpiece safety hood: ✔ - Spindle height adjustment: motorized, with digital readout - Spindle tilt adjustment: motorized, with digital readout - Control: motorized height and tilt adjustments with digital display - Control panel position: on machine body - Work table: extension left and right, and extendable workpiece support (total width 2500 mm) Location: ex-stock 54634 Bitburg - immediately available -

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Iodpoy Nybtjfx Ahbetn Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Ijdpfez Nyp Hox Ahbjtn Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)