Used Schmidt Swingo 240 for sale (118)

Year of construction: 1960, condition: ready for operation (used), Throughput capacity: 9000l/h, heat recovery: 80%, operating temperature range: 5°C-71°C, max. operating pressure: 5bar, volume: 1/2: 97l/96l. On-site inspection is possible. Nedpfoyarp Aex Ah Hjwb

Year of construction: 2021, condition: used, Serial number: U-H2 52-75-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22059 Specifications: Nwedex Ip Uyspfx Ah Hob Model year 2021 Weight: 2,500 kg Ready for delivery Own weight: 2500 Model: Schmidt U-H2 klappvingeskjær

Year of construction: 2020, condition: used, Serial number: U-H2 58-74-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22058 Specifications: Nwodpfx Aex Ip Umsh Hsb 2020 model Weight: 2635 kg Ready for delivery Own weight: 2635 Model: klappvingeskjær

Condition: used, mileage: 61,358 km, power: 62 kW (84.30 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, next inspection (TÜV): 12/2026, color: orange, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 5,300 mm, operating hours: 5,196 h, Equipment: air conditioning, Rotating beacon lights, leaf vacuum system at the rear, non-binding offer—modifications and interim sale reserved—the sale is conducted with exclusion of any warranty—all information provided without guarantee! Nwodpsx Uq S Tefx Ah Hob

Condition: used, functionality: fully functional, power: 260 kW (353.50 HP), first registration: 05/2001, fuel type: diesel, color: orange, axle configuration: 1 axle, fuel: diesel, Year of construction: 2001, operating hours: 2,590 h, machine/vehicle number: 15, SCHMIDT - VAMMAS SB 3600 H Ready for operation Nedepgvlkepfx Ah Hjwb

Condition: good (used), Year of construction: 1987, Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg Njdocitlhspfx Ah Howb

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm Nodsd S Tg Aopfx Ah Hswb -Weight: 350 kg

Condition: used, Saw blade grinding machine, tool grinding machine, grinding machine, automatic sharpening machine for circular saw blades -Saw blade sharpening machine with partial gear -For grinding circular saw blades up to: Ø 200 mm -Automatic delivery and power off -Dimensions 900/830/H1490 mm -Weight: 498kg Nodpfx Aormt Sgeh Howb

Condition: good (used), Year of construction: 1987, Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow Nsdpfxsdz U Spo Ah Howb -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Condition: good (used), Year of construction: 1997, Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Scmidt, aluminum metal circular saw Velox 350 24V with solid base frame -Saw blade: Ø 350 mm 1800/3600 rpm Nedpfx Ahen D Urpj Howb -Double miter: 45° -Cutting capacity-round: 90°/45°: Ø 120 | 115mm -Cutting capacity-Square 90°/45°: 200x88 | 150x80mm -Drive: 1.5/1.8 kW -Double clamping device: manual operation -Dimensions: 900/585/H1850 mm -Weight: 194 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A Nwodpfx Ahjfitfle Hjb -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Year of construction: 2010, condition: used, Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable Nwjdjg N Tu Nepfx Ah Hjb -Dimension: 400/380 / H1260 mm -Weight: 205 kg

Condition: used, Year of construction: 1986, Schmidt VF5 ZL Front-Mounted Snow Blower Year of manufacture: 1986 Nwjdpfx Ajx Svwcsh Hsb Specifications: Attachment plate size: 3 Discharge chute with hydraulic side adjustment Drive via PTO shaft Clearing width: 2,600 mm Weight: 1,650 kg Sale in current condition and only to businesses! Our business hours: Mon-Thu: 07:00 - 15:30 Fri: 07:00 - 15:00 Offer based on our general terms and conditions! Sale to commercial customers only! Used vehicles/equipment are sold without liability for material defects according to our T&Cs! If you have any further questions, I am at your disposal. For viewings and/or test drives, please arrange an appointment in advance! Vehicles/equipment are not always available on site.

Condition: used, Year of construction: 2020, gearing type: other, first registration: 01/2020, color: orange, mileage: 1,001 km, empty load weight: 535 kg, driver cabin: other, Vehicle location: Bovenden, ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Njdpfx Asx Sr D Ssh Howb - .

Condition: used, Year of construction: 2024, Traxos S12 Tractor Spreader * Auger conveyor system * Capacity: 1.2 m³ * Folding roof * Painted in RAL 2011 * Driven by vehicle hydraulics * Marked "Winter Service" * Splash guard with mounting option on Traxos Control / Distribution System * "EP" control system (incl. electronic spreading pattern adjustment) Nwedpfow U Snhjx Ah Hsb * Tractor connection kit (7-pin ISO11786 speed, 3-pin power) * Spreading disc "490" (spreading width 2 - 8 m) * Spreading control via LED lamp (red or white) Other Notes: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport. * No liability for printing and typing errors. * Subject to errors, changes, and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information without guarantee. Further information Type: Spreader wagon Serial number: TRS32830

Condition: new, Year of construction: 2025, Schmidt PV 29-4 Year of manufacture: 2025 Condition: new Clearing width: 2895 mm at 32° / 2760 mm at 36° Weight with steel cutting edge: 940 kg Equipment: - Combination wear edge 36 - Lifting device (lifting/lowering/swiveling) - For mounting plate size 5 - Hydraulic coupling ISO 16028 (S) (size 12 / BG3) – 2 cells - Steel skid shoes - Side deflectors - Snow dust cover with scraper cover - Red/white warning markings - Warning flags - Plough lighting 24V, 7-pin Sale in existing condition and only to other businesses! Our business hours: Mon–Thu: 07:00 – 15:30 Fri: 07:00 – 15:00 Nsdpfx Ahjx Rx S Ho Howb Offer is based on our general terms and conditions! Sale only to business customers! Used vehicles/equipment are sold without legal warranty as per our general terms and conditions! If you have any further questions, I will be happy to assist you. Please arrange an appointment in advance for inspections and/or test drives! Vehicles/equipment are not always available on-site.

Condition: new, Year of construction: 2024, Schmidt TARRON MS 34.1 Year of manufacture: 2024 Condition: new Clearing width: 2885 mm at 32° / 2750 mm at 36° Passage width: 3099 mm at 32° / 2990 mm at 36° Njdpsx Rxy Dsfx Ah Howb Weight with steel cutting edge: 1060 kg Equipment: - Right-hand raised moldboard - Steel cutting edges with shock absorbers - For mounting plate size 5 - Hydraulic adjustment group (lifting/lowering/side shift) - Hydraulic coupling: ISO 16028(M) size 12/BG3 2 cells - Support skis - Parking stand with wheels (set) - Snow dust shield with moldboard cover - Side deflectors - Steel cutting edge - Warning markings - Lighting Sale in existing condition and only to businesses!!! Our business hours: Mon-Thu: 07:00 AM - 03:30 PM Fri: 07:00 AM - 03:00 PM Offer is subject to our general terms and conditions!!! Sale to businesses only!!! Used vehicles / used equipment without warranty for material defects according to our terms and conditions!!! If you have any further questions, I am happy to assist you. For viewings and/or test drives, please arrange an appointment in advance!!! Vehicles/ equipment are not always on site.

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45 Nedpfx Aex Hp Tmsh Hewb

Condition: good (used), Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg Nwodpfx Ajr A H R Tsh Hsb

Condition: new, functionality: fully functional, laser type: fiber laser, laser source manufacturer: Maxphotonics, total length: 5,150 mm, total width: 2,870 mm, total height: 2,450 mm, Equipment: CE marking, centralized greasing system, cooling unit, Why continue struggling with the cut quality of fine plasma systems? Why waste valuable space in your workshop with a shuttle table? Why spend thousands of euros every year on expensive plasma consumables? In addition to the obvious advantages of modern fiber laser technology with regard to precision and virtually rework-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is far easier to operate than plasma cutting systems. Best of all, at Schmidt & partners Cutting, we fully support your machine throughout its entire service life from our two service locations. As your reliable partner in the cutting industry, we offer expert consulting, installation, training, maintenance, and repairs. Our expertise and know-how are available to support you, including with cutting parameters for special materials. We are also happy to assist you in the implementation of this technology into your business—ensuring laser safety and compliance. kaitec FIBER Eco 1530 Cutting area: 1,500 x 3,000 mm Max. sheet thickness: 25 mm (depending on laser source power) Laser systems: 2kW / 3kW / 4kW / 6kW Maxphotonics series (In cooperation with AK Industry GmbH, certified service partner in Germany) CE certified, risk assessed Machine price depending on configuration, tailored to your requirements from €96,850 (plus transport, installation & training) Don’t have a suitable filtration system yet? We are happy to provide the appropriate extraction and filter unit, customized to your needs. We look forward to hearing from you! Nwjdjx Ngp Dspfx Ah Hob

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – CUTTING TECHNOLOGY BY PROFESSIONALS FOR PROFESSIONALS Nwsdpfox Ngn Tox Ah Hob With the highly economical plasma process, material thicknesses of up to 25 mm can be cut optimally. Automatic initial height detection, automatic arc control, and intelligent collision protection ensure maximum quality and the highest possible repeatability. The automated program sequence and the long service life of the consumables help to actively and significantly minimize cutting costs. The oxy-fuel process also impresses with its ease of use and functionality. Thanks to the automatic piercing function, preheating times and the activation of cutting oxygen are controlled by CNC. This allows sheets up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on milled surfaces. The sturdy cutting grate features offset, serrated support blades, providing optimal sheet metal support and reducing slag formation on the workpiece as well as excessive wear of the blades, which saves real money on rework and maintenance. The depth of the trough is precisely designed to accommodate slag and ensure effective cooling; it is easy to clean and captures the dust produced during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Plasma material thickness: 1–25 mm Oxy-fuel material thickness: 10–80 mm Price: Machine price depending on configuration, tailored to your requirements from €38,900 plus plasma unit, transport & installation We look forward to your inquiry!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 50 mm, kaitec Easycut – PLASMA & OXYFUEL CUTTING PERFECTION FOR METAL & STEEL CONSTRUCTION The kaitec Easycut is a highly flexible CNC gantry cutting system, specifically developed for cutting material thicknesses between 1 and 50 mm. Thanks to its space-saving flatbed design, it is ideally suited for a wide range of applications. The double-sided driven machine gantry ensures exceptional cutting results through high rigidity and precise mechanical guidance. Available in three cutting area sizes, the kaitec Easycut can be tailored exactly to your sheet metal processing needs. It impresses with its great flexibility in the compact cutting machine segment. kaitec Easycut – WATER TABLE SYSTEM The robust water table forms the basis of the flatbed design. The precisely aligned longitudinal guides and the sturdy, serrated cutting grate reduce slag, protect the slats, and minimize maintenance costs. Optimized tank depth enables efficient slag collection and cooling. In addition, the system is easy to clean and reliably captures cutting dust. kaitec Easycut – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With its highly efficient plasma process, material thicknesses up to 25 mm can be cut precisely and cost-effectively. Automatic initial height sensing, arc voltage control, and intelligent collision protection ensure maximum quality and repeatability. The automated cutting process and long consumable life notably reduce operating costs. The oxyfuel process also impresses with straightforward handling and reliable functionality. The CNC-controlled piercing function optimizes preheating times and automatically regulates the oxygen supply, enabling sheets up to 50 mm to be cut efficiently. The oxyfuel system is available for acetylene or propane gas and features automatic height control for consistently precise cutting results. Cutting Area: 1,500 x 3,000 mm Material Thickness Plasma: 1-25 mm Nedjx Ngnyopfx Ah Hswb Material Thickness Oxyfuel: 10-50 mm Price: Machine price depending on equipment, tailored to your requirements from €29,900 plus plasma unit, transport & installation We look forward to hearing from you!

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec 1530 – Your Ultimate Solution for Precision Cutting! Are you looking for the best entry-level machine on the market? Your search ends here! With the kaitec 1530 plasma cutting system, you gain access to unrivaled cutting performance and unbeatable flexibility. No more reliance on external cutting services or dealing with lengthy lead times from suppliers. The kaitec 1530 plasma cutter is designed to give you full control over your cutting requirements. Its intelligent material utilization will save you money and reduce unnecessary transport costs. Say goodbye to long waits for your orders – you control the delivery schedule and work at your own pace. Our kaitec 1530 cutting system has taken the industry by storm—and for good reason. It combines performance, flexibility, and cost efficiency like no other. Eliminate dependency and delays—choose the kaitec 1530 plasma cutting system to boost your productivity, save costs, and accelerate your workflow. Welcome to the future of cutting! kaitec 1530 – Precision and Versatility for the Future of Cutting! Our innovative machine combines the power of plasma and oxy-fuel technologies, enabling you to cut materials with impressive thicknesses of up to 50 mm. Precision cutting has never been so easy. Thanks to our integrated cutting database for mild steel, aluminum, and stainless steel, you always have total control with optimal settings for every material. With 50 macros for creating cutting programs directly on the CNC controller, your possibilities are virtually limitless. The kaitec 1530 plasma cutter not only ensures efficient workflows but also cost optimization. Our intelligent remnant sheet management and cutting cost module help you reduce material waste and lower your production costs. Experience the future of cutting with kaitec 1530 and increase your productivity, efficiency, and profitability. Welcome to a new era in cutting! Cutting Area: 1,000 x 2,000 mm 1,500 x 3,000 mm Nwjdsx Ngl Sepfx Ah Hjb Material Thickness (Plasma): 1–25 mm Material Thickness (Oxy-fuel): 10–60 mm Price: Machine price depending on configuration, tailored to your requirements: from €8,900 (machine only, without table, etc.) from €15,900 (complete set) plus plasma source, transport & installation We look forward to your inquiry!

Year of construction: 2016, condition: ready for operation (used), This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine. Application Types Stamping Nwjdpox D Ncasfx Ah Hsb

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Nodpfjq S Uwbjx Ah Hewb Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used