Used Rubber Extruders for sale (4,000)

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use Knsdpfx Aeifgwhohgsb The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Excellent, high-quality twin-screw compounding line. Fully equipped and suitable for the production of food, bio-based, and synthetic polymer compounds. Two side feeders with weighing scales, Siemens control PLC system. Output: 250-350 kg/h, depending on the raw material. Main motor: 90 kW. PLA, PHA, PP, PET, PA, ABS, and all other polymers. The equipment is in very good condition and has been used very little. Kodpfx Aezzni Hehgonb

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: Ksdjd Sg Hcspfx Ahgsnb die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: like new (used), Year of construction: 2021, operating hours: 730 h, functionality: fully functional, clamping force: 2,700 kN, nominal power: 22 kW (29.91 HP), operating pressure: 265 bar, We offer this like-new DESMA D 969.250 Z (S3) rubber processing machine, manufactured in 2021. Closing force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short-circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive flow rate: 72/39 l/min Pump drive power consumption: 32.0 A Kodpfx Aszgvxyjhgjnb Pump drive power: 22 kW Nozzle system force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Operating hours: hydraulic motor: 730 hours, hydraulic pump (closing force): 65 hours, operating system: active 3,360 hours Ideal for the production of: • technical rubber molded parts • seals and O-rings • automotive and industrial components Condition & Availability: • Machine is available for immediate delivery • Condition: very well maintained / regular servicing • Inspection possible by arrangement Other: • Documentation and accessories available on request • Assistance with disassembly / loading / transport can be arranged If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: Ksdpsy A H Umefx Ahgsnb • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale to the highest bidder! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium and high voltage cables TECHNICAL DETAILS Knsdpszr H Ebsfx Ahgjb Screw diameter: 200 mm Length from feed to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Condition: used, Year of construction: 2006, functionality: fully functional, Distecno Flap Box Production Line – For Sale FOR SALE – DISTECNO FLAP BOX PRODUCTION LINE, 2006 Price: only €25,000 - Machine is currently in production and available from October 2026. - Automatic vacuum lead-edge feeder. - 2 flexographic printing units – top printing, chrome-plated (+1 additional printing unit requiring refurbishment). - Anilox rolls + rubber rolls (2 rolls refurbished in 2019). - Automatic slotter. - Automatically adjustable folder-gluer. - Automatic delivery section with stacking, counting, and bundling of finished packages. - Maximum sheet size: 1,677 × 2,500 mm. The machine is in good working condition and is currently in production. - Full machine documentation available. - Machine dimensions (net): 17 m × 4 m. - Production capacity: up to 10,000 sheets/hour, depending on box size and the efficiency of the operators at the feeder and delivery sections. - The machine processes corrugated cardboard from 310 g/m² to 1,500 g/m². Availability: October 2026 For sale: DISTECNO FLAP BOX PRODUCTION LINE from 2006 Price: only 25,000 Euros - Machine is continuously in production, available in October 2026 - Automatic vacuum lead-edge feeder - 2 flexographic printing units – top printing, chrome-plated (+1 printing unit requiring repair) Kjdpezznxbsfx Ahgenb - Anilox rolls + rubber rolls (2 rolls refurbished in 2019) - Automatic slotter - Automatically adjustable folder-gluer - Delivery section with stacking and counting of packages - Max sheet format: 1677 x 2500 mm The machine is in good condition, in production, and available immediately. The machine has complete documentation. Net machine dimensions: 17m x 4m Capacity: up to 10,000/hour, depending on the size of the packaging and the efficiency of the operators at the feeder and delivery sections. The machine processes corrugated cardboard from 310 g/m2 to 1500 g/m2.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Kedpfxex U A Iaj Ahgonb The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === Kjdpsy U H Hmefx Ahgjnb The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 625 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (min.): 5,000 rpm, overall weight: 1,000 kg, 4-knife TERSA cutter head for planer Motor power 7.5 kW Positioning control for the thickness table Segmented infeed roller Segmented pressure bar Feed speeds of 7 + 14 m/min Table extension Kjdpfsz Dkftex Ahgenb Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm Thickness table mounted on four support spindles and with 4-point guidance. Heavily ribbed cast iron table, finely planed Modern control panel ergonomically positioned. Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode, Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear) Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the outfeed pressure bar Two feed speeds 7 + 14 m/min; electrically switchable, also during planing Thickness hood with carpet support, can be used as a storage area for wood. Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site) Air velocity 22 m/s Integrated tool storage compartment for operating tools and planing knives Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual Weight: approx. 1000 kg CE-compliant, BG-Holzstaubgeprüft No. HM 23001 Workplace-related emission values dB(A) according to DIN 45635 Part 1650 Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A) Workplace-related dust emission value: 0.44 mg/m³

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 8000, Year of construction: 2020, total length: 1,158 mm, total height: 1,788 mm, total width: 882 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 296 mm, feed length Y-axis: 296 mm, feed length Z-axis: 296 mm, wire diameter (max.): 1.75 mm, Equipment: CE marking, emergency stop, Used 3ntr Spectral 30 3D printer, from a demo center Availability: immediate Origin: showroom, used only for demo purposes. The SPECTRAL 30 is a high-performance FDM printing system for ultra-polymers such as PEEK, PAEK, Ultem 9085, Ultem 1010, PPS, and other standard filaments including ABS, ASA, and NYLON. 4 extruders up to 500°C, 0.4mm nozzles for 1.75mm diameter filaments, with the option to perform annealing in the printing chamber. In impeccable condition, coming from a showroom and used only for demonstration purposes. The machine is perfect, ready for operation, and available for any testing or inspection. It is supplied with its wooden crate. Technical specifications Technology: FDM Heated chamber up to 250°C + 4 integrated ventilation units (desiccators) Printing area: 296 x 296 x 296 mm Ksdpfxjzzw Ryo Ahgonb Connections: Ethernet Calibration system: automatic Weight: approximately 400 kg Power supply: 380 V

Condition: reconditioned (used), Overall condition: Very good Kjdpfxjzfzg Ts Ahgsnb Recent maintenance: The cylinder (barrel) was replaced last year.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Knedeztl Scjpfx Ahgeb - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Year of construction: 2026, CNC knife, creasing and cutting plotter, cutting plotter, creasing plotter Machine configuration: Drives: Helical hardened ground X, Y ball screw Z axis Linear bearing: Trapezoidal rails Travel speed: 80 m/min Program resolution: 0.005 mm (0.0025 servo motors) Positioning accuracy: 0.01 mm Double-sided gate drive: yes Electrospindle power: 7.5Kw S6 Maximum electrospindle speed: 24000 rpm Electrospindle inverter: yes Brushless electrospindle: yes Cutter shank diameters: from 1 to 20 mm Construction: Steel welded Power supply: 400 V Possible additional options: - tool cooling - positioning bases with control - central lubrication system - Pneumatic extraction foot - Manual manipulator - 10-position linear magazine - 1.50 mm pneumatic oscillating knife - Creasing head Kjdpfet N Stxex Ahgenb - Circular knife - Material height sensor - Tool length and diameter sensor - 24-inch touchscreen monitor - Remote service access - 244 m3 vacuum pump with control system - Gate angle auto-calibration - Intelligent energy recovery - Safety fence Material fixing: Vacuum, pneumatically controlled sections with expansion valve Control Real-time industrial control system steel and soft metals: aluminum, brass, copper, bronze etc. composites: dibond, alucobond, etc. plastics: polycarbonate, PVC, plexiglass, teflon, polyamides, gambit, rubber, etc. solid wood and wood-based panels: plywood, chipboards, MDF, OSB, etc. paper, cardboard, foil, etc. foams, extruded materials, etc. leather, textiles etc. #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminum #aluminum #brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing - Control system Knodou Hik Depfx Ahgsb

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Knodpfx Aezwpvajhgob Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Knjdpexykcgsfx Ahgjb Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: used, Year of construction: 2008, The MAXDROP type machine is used for the production of various pastry products such as muffins, shortcrust biscuits, meringue cookies, sponge cakes, and others. Brand: MaxDrop 2000 Model: AL 200 Head width: 600 mm Recipe memory: up to 90 recipes Knjdpsx Irkdofx Ahgsb Machine dimensions: 1100 x 1400 x 1375 mm Year of manufacture: 2008 Power supply: 400 V Installed power: 1.64 kW Weight: 400 kg Condition: used Original technical documentation + CE declaration.

Condition: used, Year of construction: 2015, operating hours: 607 h, functionality: unexamined, overall weight: 544 kg, input voltage: 24 V, power: 2.13 kW (2.90 HP), battery voltage: 24 V, gradeability: 10 %, We are offering this used Comac INNOVA 70S scrubber dryer, manufactured in 2015. Model: INNOVA 70S Year of manufacture: 2015 Voltage: 24 V Maximum incline: 10% Power consumption: 2130 W Battery weight: 132 kg Machine weight: 544 kg Protection class: IP23 Part number: 105732 Serial number: 115000030 If you have any questions or require further information, please do not hesitate to contact us. Knodpfx Aozzq Skehgeb

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 Knodpfjvy It Tex Ahgeb For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder Kodpfoxiu Npjx Ahgsnb 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Ksdpfx Aezti Tkshgonb Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Kedpfx Ahex Dip Tsgjnb Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: like new (used), Extruder hose sections for Weber DS 10.22. Knsdpfxohlvm Nj Ahgob

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Kjdot Tvx Tepfx Ahgjnb Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.