Used Round Corners for sale (6,029)

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Chedpfszpw Hdox Albjb Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: excellent (used), Year of construction: 2007, Technical data: Csdpfx Asztckijlbohb Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Chjdpfezt Ikbjx Albsb Injection weight: 154.7 g Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Cedpfezc Iw Ujx Albjhb Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Cedpezhmbuefx Albjhb

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Chedpfxozilqke Albob Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Cedpszimgtjfx Albehb Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Chsdpfozuzpyex Albob Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Chedpfszxg Amsx Albob Piovan dryer, model TDM604. Year of manufacture: 2005. Includes documentation. The machine is powered on for inspection.

Condition: used, Esterer round timber intake, 4-strand with feed table with separator with inserter complete with chains and motors Total conveyor length: approx. 6.8 m Total width: approx. 7.5 m Already dismantled Location: Austria, near Graz (Internal number: 10br12) Chedpfxjyxz U Te Albeb

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Chjdpfx Aoilhfcjlbjb

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Cjdsr N Rh Hopfx Albehb

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Chjdpfx Alorc Hibebeb

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Csdpfx Aljyddy Uobohb

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Chedpfjyddzfex Albjb

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Cedpfx Aljy Dgq Dobehb

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Chsdpfeznx Hiex Albob

Condition: refurbished (used), BENDING ROLL MACHINE SHEET METAL LENGHT 4000mm SHEET METAL THICKNESS 15mm 3 BENDING ROLLS PREBENDING WEIGHT: 23.000kgr Cedpfshxyiljx Albehb THE MACHINE IS IN TOP CONDITION LIKE NEW NEW ELECTRIC PANEL, NEW ELECTRIC CABINET, NEW CABLES, NEW SEALS, MOTOR AND PUMB RESTORATION

Condition: used, Year of construction: 2024, Mechanical depth adjustment Hercules tines Coulter set Reversible coulters DSTS roller / Ø 530mm Following harrow DSTS roller Lighting / Cjdpjtvgmnsfx Albjhb

Condition: new, roller (bottom) diameter: 56 mm, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swivel top roller - Documentation Chedpfxor Ixphs Albsb

Condition: new, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll - Conical rolling - Swiveling top roll - Braking motor - Emergency stop - Documentation Codpfx Aepwgcujlbshb - 400V

Condition: used, Prakma book cover rounding machine ( Case Rounding machine) Cedsty Tr Eepfx Albohb Very good condition, full function. Various rounding radii available. Other machines available (riveting machine, eyeletting machine, bundling machine, corner rounding machine, drilling machine, stitching machine) More machines on stock. Price plus VAT. EXW. All information without guarantee. Subject to prior sale. Dealer transaction. The sale takes place under exclusion of any warranty.

Condition: new, - Capacity: 700 x 2 mm - Conical rollers - Removable top roller - Foot control Cedpfxeihv Hpj Albshb - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, - Capacity: 1070 x 5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (for material clamping) - Digital display for rear roller movement - Hardened rollers - Tapered rollers - Emergency stop - Documentation - 400V Cjdogg Nv Sspfx Albjhb

Condition: new, Year of construction: 2024, - Capacity: 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers - Brake motor Chjdpfx Aljgg Rbpobjb - Foot switch - Emergency stop - Documentation - 400V