Used Rotary Veneer Lathe for sale (9,930)

Condition: excellent (used), Rotary indexing table Model C 315 k Diameter 315 mm Direct indexing: 15 degrees or indirect indexing via crank and indexing discs Height 135 mm Width 360 mm Ledpfszdt N Dox Af Sort Depth 560 mm, with crank Weight 75 kg

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Lrjdpozk A U Aefx Af Sot Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg

Condition: excellent (used), Planspiral chuck Auto Strong Diameter 310 mm Camlock size 8 Ledpfxoln Uixo Af Ssrt Taper diameter 139.735 6 stud diameter 25.4 Pitch diameter 171.4 Chuck height including flange 135 mm Weight 53 kg

Condition: excellent (used), Lathe Manufacturer: Zerbst Center distance: 960 mm Distance between centers: 2500 mm All data can be found in the images. More images are available. Lrsdpfxezhlf Es Af Sot

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm Lsdpfepviqiex Af Sjrt center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: used, Safety chuck for rotary tables Diameter 200 mm Bolt circle 133 mm Taper 106 mm Lodpodb Uy Isfx Af Sort

Condition: good (used), Facing lathe POREBA TZB-250A Manufacturer: POREBA, Poland Max. turning diameter: Ø 3,200 mm Turning diameter over bed: Ø 2,500 mm Face plate diameter: Ø 2,000 mm Max. workpiece weight: 4,000 kg Ljdpoz D Itujfx Af Sjrt Spindle speed range: 0.5 – 100 rpm Main motor power: 55 kW Two independent tool slides Machine weight: 30,000 kg Machine is operational. Please contact us for further information.

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Main spindle power 30 Kw, Lrjdpfez D H Nuox Af Set 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet Ljdpoz D Hx Nofx Af Ssrt At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, milling speed 12,000rpm, sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, Lrodpfx Afsz D Eupe Set sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: excellent (used), Year of construction: 1999, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle bore: 200 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, overall weight: 41,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Ljdjymk E Aspfx Af Sert Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, CNC lathe, Haas brand, GT-10 model, year 2010. Lsdpez D D I Usfx Af Sjrt

Condition: used, Year of construction: 2002, Technical details: turning diameter over bed: 330 mm turning diameter over support: - mm Lrodpfx Asy Rk S Ejf Sot turning length: 3000 mm centre height: 330 mm spindle bore of work spindle: 82 mm range of revolution per miute: 9 - 1600 U/min feed range: 0,028 - 6,43 mm/U tailstock quill adjustment:: 150 mm tailstock taper MT: MK5 total power requirement: 7,84 kW weight of the machine ca.: 2,9 t dimension machine approx.LxWxH: 4,13 x 1,05 x 1,35 m The KNUTH Sinus 333/3000 is a heavy-duty conventional precision lathe designed for universal industrial applications. Key strengths of the machine ·Large distance between centers: 3000 mm ·Suitable for machining: oLong shafts oHydraulic rods oRollers oSpindles oAxles oGeneral mechanical engineering components Equipment ·Sony 3-axis digital readout system (Z0 / Z2 / X) Accessories ·Various accessories included, see photos. *

Condition: good (used), Year of construction: 2012, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, 3 jaw chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor. Lodpfx Afez D Ayve Sort

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, Lrsdsz D Axfjpfx Af Sot 10 station turret 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Lodpfx Afsu T Drys Ssrt Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: used, Used machine Equipment and technical data: Pressing area: 2,500 x 1,300 mm Clearance height: Max. 400 mm Max. operating pressure: 390 bar Lodpjz Dyfiefx Af Sort Nominal surface pressure: 2.3 kp/cm² Max. surface pressure: 2.9 kp/cm² at 75% surface utilization Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 2017, Seal It Systems Rotary pot sealer 2017, Stainless, rotary pot sealer, with magazine for pots and pre cut seals, heated sealing press and push arm piston to remove finished pots, previously used for small sauce dip pots 60mm x 40mm, with space to add a filling machine, HMI touch screen control, mobile Ledpfx Afoz Dxpge Sjrt

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Ledpfx Afoz Dwtws Ssrt Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: like new (used), Year of construction: 2015, operating hours: 18,000 h, machine/vehicle number: IntNr231671, CNC Swiss-type lathe STAR SR32JN, new, manufactured in 2015 Control system, manufacturer: Fanuc, series 32i-B, 7 axes (X/Z/Y/C1/X1/Z1/C2), Bar diameter max. 32 mm, Turning length max. 80 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle diameter max. 32 mm, Counter spindle speed max. 7,000 rpm, C-axis, Tool holder for a total of 23 tools (linear tool holder, front tool holder, rear machining), Coolant pump with increased flow rate Parts conveyor belt, Mayfran chip conveyor, Bar feeder magazine FMB turbo 3-36/3200 / A / accessories for short-turning The machine can be inspected under power by appointment. Ljdjz Dwubspfx Af Sort Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, TSUGAMI HS 207-5AX is a CNC automatic lathe / Swiss-type lathe with high precision, excellent accuracy and reliability. 5 axes, 2 spindles; turning diameter 3–20 mm; max turning length 250 mm; internal spindle diameter 20 mm. Spindle speeds 200–10,000 t/min; spindle power 3.7 kW; back spindle 2.2 kW; 35 tools; rapid traverse 32 m/min; power 50 Hz 3x400 V; total installed 14.6 kVA; weight ~3300 kg; footprint 2110×1200×1885 mm. Bar feeder LNS EXPRESS 320. Built to achieve tight tolerances on precision components. Ljdpfxez Dv Efs Af Sjrt

Condition: used, STAR SR-16 R is a CNC automatic lathe / CNC Swiss type lathe offering high precision, accuracy and reliable performance. Capacities: 7 axes, 2 spindles, max turning length 205 mm, spindle bore 16 mm, max drilling Ø10 mm; travels X1 16 mm, X2 40 mm, Y1 89 mm, Z1 205 mm, Z2 80 mm, C‑axis spindle resolution 0.01°. Specs: main spindle up to 12,000 rpm, back spindle up to 8,000 rpm, driven tool speeds 8,000 rpm, rapid traverse 20 m/min; supply 3x400 V 50 Hz, total power 6 kVA; weight ~2200 kg, footprint 2207×1080×1700 mm. Accessories: LNS SUPER HYDROBAR bar feeder, ELBARON oil‑mist extractor, transformer. Achieves tight tolerances; suited for automotive, watchmaking, machine tools, aerospace and medical sectors Lrjdpfx Afjz Dvz Ts Sot

Condition: used, TORNOS DECO 2000/13 is a CNC automatic lathe engineered for precision machining, high accuracy and dependable reliability. Key capacities: 10 axes; max workpiece length 180 mm; internal spindle diameter 13 mm; spindle speeds 100-12000 t/min; back spindle 100-8000 t/min. Main specs: 50 Hz 3x400 V supply; spindle motor 2.2 kW; total power 11 kVA; weight approx. 2550 kg; footprint L2000×W1260×H1950 mm. Equipment: bar feeder IEMCA GENIUS 226/32, chip conveyor, coolant system, oil mist extractor. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Lrjdsz Dvztepfx Af Set

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Ljdpfx Asztctqef Sort Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Lrsdpfxszcn Sro Af Sot Make: VDF Wohlenberg Type: U1270 Length:1400mm Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!