Used Rotary Compressor for sale (6,950)

Condition: excellent (used), Motor-driven rotary shift table Dedpfxsif Rlbj Afzoku Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Travel lengthwise: W-axis = 1000 mm Condition: Very good (used)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 18,990 h, functionality: fully functional, power: 22 kW (29.91 HP), pressure (min.): 10 bar, Equipment: refrigerant dryer, Storage container with compressor, Renner type RKTBJ 2022 refrigerant dryer, 2 Drukosep water-oil separators, Mabe 2000 litre compressed air tank due to insolvency Dkedpsxlab Ajfx Afzju

Condition: good (used), Piston compressor Motor power: 18 kW / 24 HP Dedpfjvv Rpcsx Afzeku Unfortunately, the compressor does not have a nameplate, so I do not know the exact air delivery.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 15 kW (20.39 HP), operating pressure: 10 bar, Equipment: documentation/manual, type plate available, New Boge C15-SF compressor Dsdpfx Asxk Uzhefzsku

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge Djdpfxexf Uuke Afzsku - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Year of construction: 2021, operating hours: 8,182 h, functionality: fully functional, machine/vehicle number: 1596-7980435, overall weight: 350 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,000 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Käser SM 13 T screw compressor including dryer Option K1_T2_C48 The machine runs perfectly; we had it serviced for sale. Dkjdpfexk Tx Esx Afzsu

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: API791194, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 4.73 m³/h, pressure (max.): 7.5 bar, Oil-Free Compressor Atlas Copco ZT30 API791194, internally serviced and in perfect working condition. We have been Atlas dealers for 50 years. Large stock of used and new machines for sale. Dkjdpsw Ecz Ijfx Afzou

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 752588, grinding length: 2,000 mm, grinding width: 500 mm, overall weight: 12,000 kg, disc diameter: 700 mm, with magnetic clamping plate 2000x700mm due to insolvency Dodpfxjxlaa Eo Afzeku

Condition: new, Compressor Dorin H392CS Compressor Dorin H392CS, LBP - R404A, R407C, R507, HBP - R134a, 380-400V/3/50Hz, discharge: 23.31 m3/h, cylinders: 2, oil charge: 1.4 kg connection - suction: 2 8s mm, discharge: 16s mm, Net weight - 50 kg Djdpfxjwyv Dxe Afzsku In stock - 2pcs

Condition: excellent (used), Year of construction: 2013, volume flow: 9.75 m³/h, operating pressure: 8 bar, BOGE SLF 75-3 Screw Compressor Variable speed (inverter) Motor 55 kW Capacity 9.75 m3/min Pressure 8 BAR Dodpfxjxk Auve Afzsku Year of manufacture 2013 COMPRESSOR IN FULL WORKING ORDER.

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Dkedsxf Uudepfx Afzeu Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: used, Year of construction: 2017, operating hours: 250 h, Field of application: Construction CE mark: yes Dkjdjxf Tcyopfx Afzou Please contact ATS Norway for more information Please provide reference number upon request: 21408 Specifications: 2017 model 250 hours 2366 kg Engine power: 129 kW Engine speed: 1800 rpm 10 Bars Ready for delivery   Description: We have a 2017 Kaeser M171 Kompressor w/ only 250 hours for sale. Everything works as it should. Ready for delivery Hours: 250 Own weight: 2366 Kw: 129 CE: Yes Model: M171

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, material thickness: 3 mm, straightening roller diameter: 30 mm, sheet width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Dkedpfxjxiyx No Afzju

Condition: excellent (used), Carousel Milling Machine RYE 40 SM SPEEDMAX Dkodpfx Aexf Iudsfzou Number of units: 3 Unit configuration: Milling machine Milling machine Grinding machine Pneumatic central material pressure

Condition: new, functionality: fully functional, Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 • Flow Volume: 5.21 m³/h • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: 273 mm • Depth: 343 mm Application: Dkodpfxowudyqe Afzju This compact and powerful Bitzer semi-hermetic piston compressor is ideal for commercial and industrial refrigeration systems. Compatible with a wide range of modern refrigerants, it's designed for efficient and reliable operation in HVAC, cold storage, and food processing applications.

Condition: excellent (used), Year of construction: 2009, volume flow: 7.7 m³/h, operating pressure: 8 bar, BOGE S 61 -2 Screw Compressor With heat exchanger Motor 45 kW Capacity 7.70 m3/min Dkjdpfx Aoxkz Tqefzju Pressure 8 BAR Year of manufacture 2009 COMPRESSOR FULLY FUNCTIONAL.

Condition: like new (used), Year of construction: 2021, operating hours: 745 h, functionality: fully functional, overall weight: 191 kg, power: 5 kW (6.80 HP), fuel type: electric, fuel tank capacity: 270 l, volume flow: 42 m³/h, operating pressure: 10 bar, type of cooling: air, Equipment: type plate available, ATLAS COPCO LE7-10UV 2-cylinder piston compressor for sale in new condition manufacturer ATLAS COPCO Type: LE7 – 10UV TM270 400/3/50 CE Dksdpfx Ajw Nygbjfzeu Year of manufacture: 2021 hours of operation: 750h tank: 270 liters Maximum pressure: 10 bar Air delivery: 11.7 l/s (liters/second) ≈ 24.8 cfm Weight: 191 kg Power: 5.15 kW (7 HP) Power supply: 400 V / 3 phases / 50 Hz Speed: 1500 1/min

Condition: used, Year of construction: 2006, Technical details: table load: 2,2 t table diameter: 2500 mm Dkedpfxou Nkx Is Afzsu Total power requirement: 9,6 kW max. table load: 22.000 daN / 2200kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad table height: 1700 mm machine weight approx.: 12000 kg connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Dkjdpfx Ajwugczjfzeu Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: like new (used), functionality: fully functional, power: 104 kW (141.40 HP), fuel type: diesel, color: yellow, operation weight: 2,300 kg, fuel: diesel, emission class: euro5, Year of construction: 2021, operating hours: 238 h, Compressed air treatment: Aftercooler, water separator, and PD filter Compressor control: PACE Dsdoxf Dyvspfx Afzoku Engine power: 104 kW Dimensions: 4844 x 1807 x 1892 (L x W x H) mm Number of cylinders: 4 Emission stage: Stage V Engine manufacturer/type: John Deere / 4045HI551 Operating pressure: 5-14 bar Volume flow (FAD): 10.9-9.7 m³/min

Condition: new, functionality: fully functional, New DWM Copeland D2DC3-50X-AWM Semi-Hermetic Compressor – 16.8 m³/h – 380V – 28 bar Manufacturer: DWM Copeland Model: D2DC3-50X-AWM Dsdpowudz Iofx Afzsku Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 380–420V (Y) / 3 Phase Power Consumption: 9 A Flow Rate: 16.8 m³/h Maximum Pressure: 28 bar Transport Weight: 158 kg

Year of construction: 2024, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. Dsdpfxjxf Dkne Afzjku For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Dedpfx Afsw Rcgtozeku Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2012, operating hours: 66,275 h, functionality: fully functional, Kaeser ASK35T screw compressor. 22 kW with 11 bar and 2.95 m³/min. Integrated dryer. Dodpfxoxf Aans Afzsku

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Dsdpfx Afow Nzrfjzeku Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high.