Used Rolling Rack for sale (10,119)

Condition: not inspected (used), functionality: unexamined, total height: 2,800 mm, total width: 2,000 mm, total length: 12,000 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions per storage shelf: 2,000 mm x 1,300 mm Number of pull-out shelves: 40 Bdodpoyn I Nhsfx Ab Iea MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,000 x 2,800 mm Weight: 2,000 kg External reference: Pieper - Lot 9

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz Bjdpfxjff Huwe Ab Ioda • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), Rack trolley, drying trolley, lacquer drying trolley – Single-sided loading 16 shelves, single-sided loading Support tubes 25 x 1.5 mm Covered with plastic hose and fitted with end caps. Distance from tube to tube: 80 mm Bjdsyyq Dgopfx Ab Isda Movable on 4 swivel castors, diameter 150 mm Shelf depth: 600 mm Total depth: 800 mm Total height: 2000 mm Total width: 1500 mm 2-column design

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Bjdpfoyxyfkex Ab Ieda

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM Bjdpfxexya Hzo Ab Isda PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: new, functionality: fully functional, machine/vehicle number: 60.21.287, This is a rack trolley from the premium manufacturer Rational, suitable for combi steamers of size 20-1/1. The rack trolley accommodates 15 x 1/1 GN trays. With a rail spacing of 84 mm, you may achieve better yield during loading compared to rack trolleys with 20 slots. RRP (gross): €2,528, our special price: €1,399 (gross). You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging certified Rational customer service. Are you looking for a specific Rational device type? Contact us—we have access to a wide range of used and new stock. We are happy to advise you on all device types. Our used-equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective parts, excluding labor and installation/removal costs - High-quality branded equipment at fair prices - Professional overhaul/inspection & expert cleaning - Tested and fully functional – or your money back - Flexible choices for shipping or self-collection - Competent advice – before and after your purchase - Provision of operation manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Technical data: - Dimensions (LxWxH): 824 x 561 x 1743 mm - Clearance bottom slot to cooking chamber opening: 142 mm - Clearance top slot to cooking chamber opening: 131 mm - Maximum insert height: 1.60 m - Weight: 34.9 kg - Material: stainless steel - Article number: 60.21.287 Condition: New Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement Subject to change and error. Do you have questions, require consultation, or would like to view the product on site? You can reach us by phone during our office hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC). Bedpfx Ajyfuhreb Isda

Condition: used, This is a rack trolley from the premium manufacturer Rational, suitable for the XXL model combi-steamers SCC/CM/CMP in the 20-2/1 GN size. Bedpfx Abjypcfyo Ijda RRP (gross): €2,400, our special price: €1,495 (gross) You will receive an invoice including VAT. Service: We are happy to assist you in arranging a certified Rational customer service technician. Looking for a specific Rational model? Contact us—we have access to a wide range of new and used equipment. We are glad to advise you on all device types. Our used equipment service for you: • 6 months warranty on electrical parts (limited to replacement of defective components, excluding labor costs) • High-quality branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Expert advice before and after your purchase • Provision of user manuals, wiring diagrams, and spare parts • Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): 772 x 1,016 x 1,717 mm Clearance, lowest tray to cooking chamber opening: 50 mm Clearance, highest tray to cooking chamber opening: 87 mm Max. loading height: 1.60 m 20 tray slots 2/1 GN With container lock Accessible from both sides U-rails 4 tandem swivel castors (2 with brakes – metal parts made from stainless steel) Removable and drainable drip tray Rail spacing: 63 mm Weight: 65 kg Material: Stainless steel Item no.: 60.22.086 Capacity: 20 x 2/1 GN roasting and baking trays, racks 12 x H6-1/1 chicken grill racks (up to 1,500 g) 12 x H8-1/1 chicken grill racks (up to 1,300 g) 12 x H10-1/1 chicken grill racks (up to 950 g) 40 x 1/1 GN, 20, 40, 55 mm deep 12 x 1/1 GN, 65, 90, 100 mm deep Use for other containers: 1/1 GN, 2/4 GN crosswise Corrosion-resistant stainless steel (CNS 1.4301) Condition: Used Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the item in person? You can reach us by phone during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, - Year of construction: unknown Bodpfx Aoumvtksb Ijda - min. part length 320mm - Max. part height approx. 210mm - number of levels 7 Stk. - distances between levels 100 mm - insert depth 650 mm - number of vertical posts 300-450-450-300mm, 5 Stk. - overall height 1740 mm - Overall width 1.540 mm

Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley Drying boards for carpenters or joiners Jungheinrich article number: 167793-4A several available Bjdsvntzxspfx Ab Ijda 3 packages, can be sent 14 layers Support arm diameter 20mm Installation height 1770mm External dimensions height 1960mm and length 1520mm Frame width and external dimensions depth 860mm Load capacity per level 20kg Own weight 73mm Delivered disassembled

Condition: excellent (used), Year of construction: 2023, Robust FETRA tier trolley with triple side rail. Fitted with solid rubber tyres, 2 swivel castors and 2 fixed castors, diameter 20 cm. With push handle. Total of 4 loading surfaces (3 height-adjustable). 110 cm wide, 70 cm deep, 178 cm high. (A total of 5 units available for sale.) Bdjdpoyg E Edefx Ab Isa

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 trolleys: 800x600 mm - Baguette capacity: minimum 360 - Refractory stone (heat accumulator) - Integrated heat recovery unit - Baking surface: 19.2 m² - TOUCHMATIC touch screen control - Voltage: 400V - Power: 4 kW - Burner: Gas - ALL-IN-ONE = Rotary rack oven with integrated heat recovery unit - No additional trades required for installation - No electrical consumption by the heat recovery unit, as it is 100% mechanical Bjdpfx Absxxanpo Ieda - No need to connect to BMS (Building Management System)/central heating, no buffer tanks to store hot water - Automatic adjustment with no need for control, monitoring, or complex programming - Truly maintenance-free heat recovery unit - Heat recovery on each burner operating cycle - Long service life equal to that of the oven’s heat exchanger - Primary energy consumption reduced by 20% (oil/gas) - Improved baking results due to faster achievement of target baking temperature after loading - Further primary energy savings thanks to shorter baking times - No downtimes (no reheating periods) for continuous baking - Heat remains where it is produced and needed: in the baking chamber, to bake your delicious products

Condition: like new (used), Large quantity of racks and trolleys for 1300mm retorts. Have been used for pouches and ready meal trays. Up to 180 units available. Bjdpfxjihgdgs Ab Isda

Condition: excellent (used), Year of construction: 2019, I offer furniture cage trolleys / storage carts with the following dimensions: Width x Depth x Height: 1300 x 1150 x 1800mm ✅ Current stock: approx. 600 units ✅ Other sizes of furniture trolleys available on request. ✅ Each furniture cage trolley is fully refurbished (panel and bolt replacement). ✅ We provide a 1-year warranty on used furniture trolleys. • Triple stackable • Wheels made of 100% polyamide, 4 swivel castors, 1 wheel with directional lock • Empty trolleys can be folded and nested into each other The furniture cage trolley is ideal for in-house transport and storage of virtually all types of goods. Thanks to the triple stacking feature, the full warehouse height can be utilized optimally. All trolleys are in very good condition. Bodpjxmt Ewsfx Ab Ieda Naturally supplied with invoice. Transport available throughout Europe. KAM-KUB Logistic & Trolleys Europe – Your specialist for sales and service of furniture cage trolleys in Europe.

Condition: like new (used), functionality: fully functional, overall weight: 100 kg, System shelf with 4 high-quality caster groups with high load capacity The mobile shelf is ideal as a machine rack or assembly rack The shelf is sold as shown, with a large number of screws and parts. Bsdpfx Aewnxcgsb Isda Only

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Bdsdpfxsyw T D Dj Ab Isa In good working condition

Condition: good (used), Technical Data for Pallet Rack Beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet rack beam, used Material color: RAL 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0440 Connector: 4 HK (hooks) Clear span: approx. 2,700 mm Max. load per pair of beams: 2,400 kg (with evenly distributed load) 02x Safety pins, used Finish: fully galvanized For securing the beams against accidental lifting Bdjdpsykamdofx Ab Iea Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. Transport or shipping of this item is subject to additional charges, which depend on the delivery location and/or scope of delivery and can be requested from us separately.

Condition: good (used), Shelf upright: 3,100 mm x 1,100 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,340 mm Number of bays / rack row: 05 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per row: 45 pcs. Total pallet spaces: 45 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 dimensions: 1.200 x 800 x 150 mm total height incl. pallet: n.d. Weight per pallet ( max. ): 1.000 kg Included in delivery: 06x pallet rack stand, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 3.100 mm high 1.100 mm deep Bdodpfxjm Eyk Hs Ab Isa 20x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 40x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 9,650 mm x 800 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 05 pcs. Included in delivery: 07x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 9.650 mm high 800 mm deep 60x pallet rack truss, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 120x safety pins, used Bdjdsm Eztuopfx Ab Isa execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS In the trusses are from the top, bottom & front view each 2 holes with a Ø of approx. 16 mm! These are used for diagonal bracing! Included in delivery are: 01x pallet rack traverse, used Bedslgzqcopfx Ab Isda Material color: orange U-profile : 150 x 50 x 3,00 mm execution: head traverse agraffe: 4 HK (hooks) clear width: approx. 1.400 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Note: - The pictures serve to illustrate the material. - The metal crates, boxes etc. are not included in the scope of delivery. - The color of the material may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3-5 working days. Basic dimensions: Width: approx. 1,550 mm Height: approx. 2,000 mm Depth: 600 mm The scope of delivery includes: 02x shelf uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Upright height: 2,000 mm Upright depth: 600 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 05x Shelf beams, used Material color: orange Truss type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 10x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 08x Locking bracket, new Version: galvanized f. Crossbeam width: 50 mm 03x Round ear, used Total length: 1,350 mm Tube Ø: approx. 30 mm 02x L-bracket, second-hand Material color: orange L-profile: approx. 60 x 60 mm Material thickness: 4.00 mm Total length: selectable Drill hole Ø: approx. 13 mm Hole spacing: approx. 50 mm 08x screws, M12 16x nuts, M12 04x screws, M10 04x nuts, M10 Your contact persons in our company: Bsdpfx Aot A U Ncjb Ioda Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the packing table: Manufacturer: Stow Type: Pal Rack NS Basic data: Total width: approx. 1,550 mm Total depth: approx. 1,000/400 mm Total height: approx. 2,000 mm Number of levels (1,000 mm deep): 02 pcs. Number of levels (400 mm deep): 02 pcs. Working height: approx. 938 mm The scope of delivery includes: 02x shelf uprights, used Material color: light blue Frame profile: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Upright height: 2,000 mm Stand depth: 1,000/400 mm Incl. cross and diagonal struts, base plates Bsdpfsrp E N Djx Ab Isda The uprights are pre-assembled ( bolted framework ) 02x foot plates, new Material color: blue Total width: approx. 100 mm Total depth: approx. 110 mm 08x Shelf crossbars, used Material color: orange Beam type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 16x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 32x open-fronted storage boxes, second-hand Material color: various Manufacturer: SSI Schäfer Crate designation: LF 511 G ZW Outer dimensions LxWxH: 500 x 156 x 143 mm Internal dimensions LxW: 448 x 123 mm Weight / unit: approx. 0.785 kg 01x chipboard, used Thickness chipboard: 38 mm Width chipboard: 1,550 mm Depth chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 1,000 mm Surface: coated if required (two-piece if necessary) 02x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,330 mm Depth of chipboard: 400 mm Surface: possibly coated (two-piece if necessary) 24x locking brackets, new Version: galvanized f. Crossbeam width: 50 mm The pictures serve to illustrate the material. The material color may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. General information about the item: This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 1x Shelf Connector, used Manufacturer: Stow Type: Pal Rack NS Material color: Sendzimir galvanized Total length: approx. 150 mm Bdsdpev Ua S Rsfx Ab Iea Shelf spacing: approx. 150 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Drill hole diameter: approx. 11 mm Weight: 0.200 kg | pc. 2x Screws M10 x 35 mm 2x Nuts M10 4x Washers M10 Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), clear span: 1,400 mm, total length: 7,510 mm, shelf height: 1,750 mm, Technical data for the pallet racking system: Rack system: Stow Model: Pal Rack NS Technical data for installation: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units á 1,400 mm Number of levels plus ground level: 02 units Scope of delivery includes: 06x pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange U-profile: 150 x 50 x 3.00 mm Connector: 4 HK (hooks) Design: header beam Clear opening: 1,400 mm 40x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x shimming plates, used Finish: fully galvanized For leveling rack uprights positioned on uneven floors Bdsdew I R Slopfx Ab Ioa 01x load sign With information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. If transport or dispatch is required, additional costs will be incurred, which can be quoted separately depending on delivery location and scope.

Condition: good (used), clear span: 1,450 mm, total length: 7,760 mm, shelf height: 1,750 mm, Technical details for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical setup data: Number of rack rows: 01 pc. Length per rack row: approx. 7,760 mm Number of bays per rack row: 05 pcs. at 1,450 mm each Number of levels plus ground level: 02 pcs. Currently in stock: approx. 2 sets! Scope of delivery includes: 06x pallet rack frames, used Bdjdpfx Ajw I Sx Tsb Ija Material color: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Including horizontal and diagonal braces, base plates Frames are pre-assembled (bolted construction) 1,750 mm high 1,100 mm deep 20x pallet rack beams, used Material color: orange Beam type: PNBH0443/1.5 Box profile: 130 x 50 mm Connector: 4 hooks Design: box end beam Clear width: 1,450 mm 40x locking pins, used Material color: sendzimir galvanized For securing the beams against accidental lifting 24x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 12x leveling shims, used Design: fully galvanized For leveling rack frames installed on uneven floors 01x load plate With information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information about the item: This item is only offered for collection. Any requested transportation or shipping of this item is associated with additional costs, which can be provided upon request depending on the delivery location and scope.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 2004 orange Box profile: 80 x 50 mm Crossbeam type: PNB0488 Hooks: 4 HK (hook) Bdodpfx Aswaghnjb Ioa Clear width: 2,500 mm Max. load per pair of crossbeams: 1,000 kg with evenly distributed load 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.