Used Robot Cnc for sale (10,879)

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D Nwsdpfxjwwarue Ahvjd spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t Nwedsv Nw Npepfx Ahvod The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Nsdpjwwar Ijfx Ahvowd Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning length: 568 mm, turning diameter over cross slide: 680 mm, turning diameter: 400 mm, spindle motor power: 4,000 W, spindle bore: 80 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, overall weight: 5,510 kg, 🔥 DMG MORI EcoTurn 450 V3 | C-Axis + Live Tool | 10” Chuck | 2016 | Ready to Work High-quality DMG MORI EcoTurn 450 V3 available now. Equipped with C-Axis and live tooling, this machine is ideal for shops looking to increase productivity and reduce cycle times. ✔ Strong and reliable German-Japanese engineering ✔ Perfect for automotive, subcontracting, and precision parts production ✔ Ready for immediate operation Machines in this condition and configuration are rarely available at this price level. ⚙️ Key Advantages C-Axis WITH 7 Live Tools 12-Station Live Tool Turret (6,000 rpm) 10” Chuck 80 mm Bar Capacity Turning Diameter: 400 mm Turning Length: 568 mm Spindle Speed: 4,000 rpm Spindle Power: 12 kW Price: EXW Location: SOUTH KOREA Nodsyw Tvtspfx Ahvjwd 👉 Message now for best price, videos, and full details 👉 First serious buyer gets priority

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Nsdjw Dcccepfx Ahvjwd

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Nwedpfx Asw Dcb Sehvjd

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Njdpfsvctlgox Ahvewd Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 008338, X axis working area: 4600 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Njdpfx Ahsx A Tkxovswd Number of controlled axes: 5 axes Total number of drilling spindles: 31 Total number of tool changer positions: 37

Condition: used, Year of construction: 2016, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2016 Control : Siemens 828D - ShopTurn Turning diam. : 500 mm Nwsdpfx Ahjyxuhyoved Turning length : 520 mm Mainspindle: Technology:Belt-driven spindle Speed:5.000 rpm Power (max.):22 kW Torque (max.):305 Nm Barcapacity:65 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok 210 BB Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:5.000 rpm, 5 kW, 20 Nm Movement in X/Y/Z:260/80/610 mm Rapid travers in X/Y/Z:30/15/30 m/min Tailstock: Technology:Hydraulic driven Tailstockforce (max.):8.000 N Stroke:500 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chiptray Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Rawmaterialfeed:Interface Barloader prepared Finishedpartremoval:Partscatcher with conveyor belt Toolholder:Misc. used static and driven tools Further Equipment:Rinsing pistol

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Nedpfxjlyrbzj Ahvswd Technical book with characteristics of machine is in attachment.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Nsdpfxjtwpamj Ahvowd Parts shown by hand not come.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Nwedpeuxrv Hsfx Ahvsd Technical data shown on pictures.

Condition: good (used), Machine come with equipement from pictures. Parts shown by hand not come. Nwodpfovx Tikox Ahvod

Condition: good (used), Lot of toolholders and other equipement. Nodpfx Aewfg Dtjhvewd

Condition: good (used), Year of construction: 2010, Machine have live tools option and Y axis. Nwodpfexpw Nlex Ahvjd Cutting tools not come. Parts shown by hand not come. Technical details shown on pictures.

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Nwodpfx Aok It Utshved

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. Nwjdsgw Shrjpfx Ahvjd 4 axis not come with machine.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Nwedpfx Ahorpn Dvovod Technical details shown on picture.

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Nwedpsu Rc Hmjfx Ahved

Condition: good (used), Year of construction: 2007, Machine is in good condition, Nwedpjwk Nm Isfx Ahved Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: good (used), Parts on table not come. Marked with red. Nwsdpfx Ahowxdyxsved

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Parts shown by hand not come. Nsdpowybg Ssfx Ahvswd Technical details shown on pictures.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Nedpfxek Iugzj Ahvowd

Year of construction: 2006, condition: like new (used), With machine come 5 live tool holders and 5 normal tool holders. Njdpfx Ahjlbmy Uovswd Parts shown by hand not come.

Year of construction: 2012, condition: like new (used), Parts shown by hand not come. Nwodpfelpcdwjx Ahvsd With machine come tool holders SK 40.