Used Robi for sale (439)

Condition: used, mileage: 99,811 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 01/2017, next inspection (TÜV): 01/2026, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, loading space volume: 4 m³, emission class: euro6, color: green, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ATEGO 818K Tipper Meiller 3-Way* * ZAA-towing hitch + ball head * Trailer load 10,510 kg + 3,500 kg AIR CONDITIONING * 3-seater * Vehicle number for customer inquiries: 4487 * Engine specification Euro VI, with OBD-C * Rear axle differential lock * Hydraulic connection, tipping trailer * Air conditioning * Center seat with 3-point seatbelt * Manual transmission * Lane departure warning system * Trailer coupling G 135, for ZAA * Ringfeder trailer coupling * Low-position trailer coupling, ball head up to 3.5 t, D27.1 * Electronic Stability Program (ESP) * Standard three-way tipper, 4000 x 2350 x 400 mm * Additional warm air heater, 2000 W * Two-line trailer brake * Trailer socket 12 V, 13-pin, fixed to frame, LED * Trailer socket 24 V, 15-pin * Electronic braking system with ABS and ASR * Comfort driver's suspension seat * Electric windows, both sides * Transmission G 71-6/9.20-1.0 * Single PTO * Exterior sun visor, transparent * Cruise control * AdBlue tank 25 l * Body type tipper/tipper semi-trailer * Roof hatch/roof vent * Cab rear wall with window * Weight variant 7.49 t (3.6/5.0) * Main mirror, electric, driver side * Electronic air supply unit for heating * Tipper chassis * Plastic tank 120 l, left * Minimum equipment, tipper * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * Wheelbase 3020 mm * Reversing alarm * S-Cab ClassicSpace, 2.30 m, tunnel * Stabilizer under frame, rear axle * Digital tachograph, EC, rpm, without ADR * Preparation for toll detection * Atego new build * Side board height 400 mm * Maintenance documentation * Meiller pump, 5-piston, type 254/1 * NA MB 60-1c, pump * Tires tubeless, 215/75 R 17.5 VA/VLA Iedpfx Ajxyr A Uodnsa * Front wall height 700 mm * Lashing eyes in tipping bridge floor * Preparation for additional headlights * Factory tipper, Meiller * Three-seater * Full service history * Environmental badge (green) * 2/3-door No liability for printing or typographical errors Sale only to commercial customers Subject to change and prior sale* Changes, prior sale and errors expressly reserved. The description serves to identify the vehicle and does not constitute any warranty in the legal sense. The description in the sales contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-INSTALLMENT PURCHASE offer Warranty insurance available upon request from the insurer * TÜV / UVV LBW / tachograph inspection and OBU device installation via our local partners * Zoll license plates for 30 days All export documents can be arranged, but must be requested individually * TOLL for Toll-Collect can be arranged in-house * Complimentary transfer from Stuttgart Airport or Metzingen (Württ) Train Station * ARRIVAL TRAIN STATION: 72555 METZINGEN / WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us at our website at * over 200 vehicles always in stock

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules Isdpfoxcwxgex Adnja - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework Ijdpfoxwyzaox Adnsa

Condition: used, Year of construction: 2018, operating hours: 13,276 h, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 300 kg, rotary table diameter: 410 mm, overall weight: 9,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 22 bar, Equipment: chip conveyor, rotational speed infinitely variable, Offered for sale due to upgrade to a larger MT EVO, located near Frankfurt. The machine offers top-tier accuracy. The worst part about this listing are the photos, which do not accurately reflect the machine's real condition. The machine is in excellent working order and produces highly precise components! Internal coolant supply 22 bar, including centrifuge. Heidenhain TS460 for SK40, workpiece probing system with infrared transmission. Heidenhain TT460, tool probing system with infrared transmission for tool measurement. Technical data: - 12,000 rpm - Torque: 120 Nm (S3 25% duty cycle) - Drive power: 23 kW (S3 25% duty cycle) - Separate spindle cooling for consistent temperature - Tool holder DIN SK40 with air blast function Rotary table: - Ø 410 mm General features: - Travel range X/Y/Z: 710/700/610 mm - 48-position tool changer with double-arm gripper - Chip conveyor - Coolant and compressed air gun - Coolant system - Electronic handwheel Ijdpfx Adexyhg Nonsa - Work area lighting - Cast iron machine bed, 9,000 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: MV0098-000226, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 56 m/min, nominal power (apparent): 16 kVA, controller manufacturer: FANUC, workpiece weight (max.): 200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 200 h, number of slots in tool magazine: 21, tool diameter: 200 mm, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in perfect condition, with only 200 spindle hours since new. It never had a collision. It is possible to inspect the machine under power and verify its geometry. Free packaging and loading on truck. Included in the package: 3D probing system Tool measurement probe (the stylus is damaged — we can replace it) Through-spindle coolant (TSC) Isdpfx Adsxpuwmenea Chip conveyor 21-tool magazine

Condition: used, This listing is for a PALL Palltronic Compact Star. The unit is in full working condition and is ready for immediate release. Ijdpsxx Atujfx Adnea Supplied with 2 replacement Epsom Ribbon Cartridges and software disk. An automated integrity test, whether forward flow or pressure hold, is internationally acknowledged as a truly objective and non-destructive method for determining if a filter meets microbial removal specifications and is correctly installed. Test results providea clear and accurate indication of a filter’s integrity prior to its use. Integrity testing with the Palltronic Compact Star device is reliable,cost-effective, and operator-friendly. The unit is designed to per-form a Pressure Hold Test, a nondestructive method that measures pressure decay over a period of time. The test involves automatically pressurizing the filter housing at a predetermined level, allowing the pressure to stabilize. The unit then takes the test measurement and depressurizes the assembly through the vent valve. Fully automated, the Palltronic Compact Star device eliminates the variability of test results that can occur with manual systems. It provides a simple, fast, and objective check of filter integrity

Condition: used, mileage: 383,450 km, power: 335 kW (455.47 HP), first registration: 05/2018, overall weight: 26,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space width: 2,480 mm, loading space length: 7,730 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ANTOS 2546 L Beverage Box 7.70 m with BÄR Tail Lift 2,000 kg * Body: EWERS SWING-WALL Roof Cover * Hydraulically steered 3rd trailing axle * ONLY IN COMBINATION WITH TRAILER Vehicle No. 4452 Complete Net Price €63,800 + * Vehicle No. for customer inquiries: 4449 * Engine version Euro VI, with OBD-C * Trailing axle, 7.5 t, steered, liftable * Predictive Powertrain Control * Secondary water retarder * Active Brake Assist * Rear axle differential lock * Air conditioning * Lower bunk * Lane keeping assist * Environmental badge (green) * Attention assist * High Performance Engine Brake * Rear axle air suspension * Adjustable air deflector * Wheel configuration 6x2 ENA * Full service history * Stability control assist (ESP) * Front axle air suspension * Auxiliary hot water heating, cab * Rear trailer brake connection, Duo-Matic + standard * Trailer brake system, 2-line, left brake connections * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Comfort driver suspension seat * Transmission G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Tire pressure monitoring * Central locking system * Exterior sun visor, transparent * Digital tachograph, EC, RPM, ADR * Tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Low storage tray, on engine tunnel * AdBlue tank 60 l, left * Hill start assist, speed limit 30 km/h * Roof hatch/ventilation flap roof * Heating, electronic air supply unit * M-Cab ClassicSpace, 2.30 m, 320 mm tunnel * Engine OM470, inline 6-cylinder, 10.7 l, 335 kW (455 hp), 2200 Nm * Wheelbase 4600 mm * Tubeless tires, 315/70 R 22.5 RA * Tubeless tires, 315/70 R 22.5 FA/FSA/STA * Reverse warning system * Pre-installation for toll recording * Additional stabilizer, rear/trailing axle * Aluminum rims 9.00 x 22.5, Speedline * Weight variant 26.0 t (8.0/11.5/7.1) * Pre-installation for low coupling system Ijdpexx D S Sjfx Adnea No liability for printing or typographical errors Sale only to commercial customers Subject to errors and prior sale* Changes, prior sale, and errors expressly reserved. Description is for vehicle identification purposes and does not constitute a guarantee in the legal sense. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-RENTAL PURCHASE quote * Warranty insurance available upon request through insurer * TÜV / UVV tail lift / tachograph test and installation of OBU device via our local partners * 30-day export license plates * All export documents are possible but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) Train Station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * Over 200 vehicles in stock at all times

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202539, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: ~1,300 kg Machine footprint: ~2,040 × 1,495 mm Height: ~3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): Standard: 1.5 + L/350 µm Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: Up to 500 points/sec Acceleration: Up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: Up to 800 mm Stylus weight: Max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Accuracy guaranteed: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system Iedpfsxxvldox Adnsa ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING

Condition: used, This listing is for a Memmert Double Door Incubator. The unit is in full working condition and is ready for immediate release. The Memmert Double Door Incubator is a cutting-edge, high-precision incubator designed to meet the rigorous demands of microbiological laboratories, research facilities, and applications requiring controlled temperature environments. Its innovative double-door design offers optimal visibility and easy access while maintaining consistent internal conditions, preventing contamination and ensuring precise, reliable results. Key Features: Double Door Design: Fully insulated stainless steel doors ensure superior temperature control and easy access without heat loss or contamination risks. Advanced Temperature Control: Available with energy-efficient Peltier Technology or compressor-cooling systems for precise, uniform temperature regulation. Wide Temperature Range: Adjustable from 0°C to +70°C (or +80°C for select models), ideal for a variety of sensitive research and incubation applications. Iodoxx Apcepfx Adnja Optimum Temperature Distribution: Rapid energy transfer ensures uniform heat distribution and prevents condensation and sample drying. Quiet, Low-Vibration Operation: Designed for noise-sensitive environments, maintaining quiet and stable performance. User-Friendly Interface: Features Memmert’s intuitive ControlCOCKPIT with optional AtmoCONTROL software for easy programming, control, and monitoring. Benefits: The Memmert Double Door Incubator provides exceptional temperature accuracy, making it ideal for microbiology, cell culture, and other temperature-sensitive processes. Technical Specifications: Temperature Range: 0°C to +70°C (up to +80°C for some models) Construction: Stainless steel, fully insulated Controller: ControlCOCKPIT with optional AtmoCONTROL integration Operation: Energy-efficient Peltier or compressor-cooling systems Defrost Function: Available in select models Quiet Operation: Low-vibration performance

Condition: used, mileage: 383,450 km, power: 335 kW (455.47 HP), first registration: 05/2018, overall weight: 26,000 kg, fuel type: diesel, color: black, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space width: 2,480 mm, loading space length: 7,730 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ANTOS 2546 L Beverage Box Truck 7.70 m with BÄR Tail Lift 2,000 kg * Superstructure: EWERS SWING-WALL Canopy * Hydraulically steered 3rd trailing axle * ONLY IN COMBINATION WITH TRAILER VEHICLE NO. 4452 complete Net €63,800 + * Vehicle No. for customer inquiries: 4449 * Engine Version Euro VI, with OBD-C * Trailing axle, 7.5 t, steered, liftable * Predictive Powertrain Control * Secondary water retarder * Active Brake Assist * Rear axle differential lock * Air conditioning * Lower sleeper bunk * Lane keeping assistant * Environmental badge (green) * Attention assist * High Performance Engine Brake * Rear axle air suspension * Lockable air deflectors * Axle configuration 6x2 ENA * Full service history * Stability control assistance (ESP) * Front axle air suspension * Auxiliary hot water heater, driver’s cab * Rear trailer brake connection, Duo-Matic + standard * Trailer brake, 2-line, brake connections left * Trailer socket 24 V, 15-pin * Antos * Electronic braking system with ABS and ASR * Driver's comfort air suspension seat * Transmission G 211-12/14.93-1.0 Isdexx D S Eopfx Adnja * Mercedes PowerShift 3 * Tire pressure monitoring system * Central locking system * External sun visor, transparent * Digital tachograph, EC, engine speed, ADR * Tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Low storage tray on engine tunnel * AdBlue tank 60 l, left * Start-off aid, speed limit 30 km/h * Roof hatch/roof ventilation flap * Heater, electronic compressed air supply unit * M-driver cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM470, inline 6, 10.7 l, 335 kW (455 HP), 2200 Nm * Wheelbase 4,600 mm * Tubeless tires, 315/70 R 22.5 rear axle * Tubeless tires, 315/70 R 22.5 front/trailing/steered axles * Reversing alarm * Pre-installation for toll collection * Additional stabilizer, rear/trailing axle * Alu rims 9.00 x 22.5, Speedline * Weight version 26.0 t (8.0/11.5/7.1) * Pre-installation for low coupling system No liability for printing or typing errors Sale only to traders Subject to prior sale and error. Changes, prior sale, and errors are expressly reserved. The description serves as identification of the vehicle and does not constitute a warranty in the sense of sales law. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-HIRE PURCHASE proposal Guarantee insurance available upon request from the insurer * TÜV / UVV LBW / Tachograph inspection and OBU installation possible via our local partners * 30-day export plates available All export documents can be arranged but must be requested individually * Toll for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen Train Station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * over 200 vehicles in stock at all times

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202308, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: approx. 1,300 kg Machine footprint: approx. 2,040 × 1,495 mm Height: approx. 3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): - Standard: 1.5 + L/350 µm - Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: up to 500 points/sec Acceleration: up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: up to 800 mm Stylus weight: max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Iedpfx Ajxxvkyednsa Guaranteed accuracy: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING

Condition: new, This listing is for a Brand New Harvest Right Large Pharmaceutical PRO Freeze Dryer sold through We are stock holders in UK Price Before VAT - £5,950 Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh. Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency. What’s Included - Large Pharma Freeze Dryer - Premier Vacuum Pump - Vacuum Pump Oil - Oil Filter - Stainless Steel Trays (set of 8) - Guide to Freeze Drying Key Features & Benefits - The freeze dryer has built in intelligence. It automatically and perfectly manages the freeze drying process - The ideal vacuum pressure and drying temperature is maintained for each material—preserves freshness and potency - 10.25 square feet of tray space—nearly twice the capacity of Harvest Right’s standard Large freeze dryer - Shelf Unit Has shelves for 8 trays (each tray 228.6mm W x 520.7mm D x 19mm H) - 6 liters of ice capacity - Weight: 68KG Warranty Ijdpoxx Agzsfx Adnea 1 Year international warranty provided by Harvest Right. Dimensions Overall product dimensions: 514.3mm W x 603.2mm D x 781mm H Perfect for a counter top, cart or table. Power A dedicated 20 amp circuit is required. Shipping Info - The large freeze dryer ships in one package with a total weight of 177KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA) - One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H - If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Simply filter and replace oil. Takes one or two minutes. Vacuum Pump Each vacuum pump has been factory tested to guarantee 25 microns (25,400 Microns = 1 Inch of Hg) or better, and listed CFM performance. Vacuum Pump Technical Specifications Oil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only DC Motor Energy Efficient Voltage: Standard, 230v Dimensions: 414mm x 152.4 x 307.3 Weight: 14.5KG Noise: 52 decibels Product Comparison Industrial Oil Pump vs Standard Oil Pump Oil Changes This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose). Vacuum Pressure Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especial...

Condition: used, maximum load weight: 12,440 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, next inspection (TÜV): 05/2026, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 44 m³, Year of construction: 2018, Equipment: ABS, tail-lift, 2-Axle Tandem Trailer 7.70 m with BÄR Tail Lift, 2,000 kg * Beverage body by EWERS with swivel wall roof * 4-row rear load securing system LASI VDI 2700 * Vehicle number for customer inquiries: 4452 * Air suspension * Tail lift Ijdpexx D Srefx Adnsa * EBS (Electronic Braking System) * Anti-lock Braking System (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors expressly reserved. The description serves for vehicle identification and does not constitute a warranty in the sense of sales law. Only the description in the purchase contract is binding. * TOP SERVICE & QUALITY * We are happy to provide a leasing, financing, or hire purchase offer for you on request. Warranty insurance is possible on request via the insurance provider. * TÜV (MOT), UVV LBW inspection, tachograph inspection, and OBU device installation can be arranged on site by our partners. * Customs license plate valid for 30 days. All export/customs documents available upon request, but must be requested individually. * Toll collection (Toll Collect) registration available in-house. * Free transfer from Stuttgart Airport or Metzingen Train Station (Württ). * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * --- Visit us on our website * Over 200 vehicles permanently in stock

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 141447, Technical characteristics: Max. measuring range in mm X axis 500; Y axis 500; Z axis 500 Dimensions in mm Without base: length: 1160; width: 1080; height: 1803 With base: length: 1170; width: 1090; height: 2480 Mass of CMM in kg: without base: 350 with base: 445 Max admissible workpiece mass in kg: 100 Equipment consists of: Coordinate measuring machine (CMM) with base Control (integrated) Control console Software (Calipso 5.4) Documents Probing system Master stylus Reference standard Changer rack Machine status: WORKING Ijdpfx Asxxvbrodnoa

Condition: used, This listing is for a Benchmark Scientific BV1000 BenchMixer Vortex Mixer. The unit is in full working condition and is ready for immediate release. The Benchmark Scientific BV1000 BenchMixer Vortex Mixer is an essential laboratory instrument designed for both gentle shaking and rapid vortexing of samples, including full 50 mL tubes. With a wide variable speed range of 200 to 3,200 rpm, this versatile vortex mixer adapts to various mixing needs, making it suitable for biochemical, microbiological, and other laboratory applications. The BV1000 features advanced functionality that allows it to operate in touch or continuous mode, enhancing user convenience and flexibility. Key Features: Variable Speed Control: Adjust the mixing speed from 200 to 3,200 rpm to accommodate different sample types and desired mixing intensities, ensuring optimal results. Versatile Mixing Options: The mixer comes equipped with a rubber cup head for mixing single tubes and can be fitted with a 3" flat head (sold separately) for multiple tube mixing or an optional combination head (sold separately) that accommodates up to 60 small tubes or a microplate. Q-Drive Counter-Balance System: This innovative system maximizes vortexing efficiency while minimizing noise and vibration, providing a quieter and more stable operation. Cold Room and Incubator Compatible: Designed for use in a range of environments, including cold rooms or incubators, expanding its versatility in various experimental conditions. Ijdpfx Adsxx Adaensa Spill-Proof Electronic Controls: The mixer features robust electronic controls that are protected against spills, ensuring reliable performance and ease of maintenance. Suction Feet: Equipped with suction feet to prevent walking during operation, ensuring stability and safety during high-speed vortexing. Specifications: Speed Range: 200 to 3,200 rpm Mixing Capacity: Compatible with standard rubber cup head; can be fitted with 3" flat head or combination head (sold separately) Orbit: 3 mm Operating Temperature: 4 to 65 °C (39 to 149 °F) Electrical Rating: 115V, 60Hz Dimensions: 17 x 13 x 16 cm (H x W x D) / 6.7 x 5 x 6.3 inches Weight: 3.8 kg (8.4 lb)

Condition: used, mileage: 42,811 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2022, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3 m³, color: white, number of seats: 3, Year of construction: 2022, * FUSO 7 C 18 Tipper MEILLER 3-way with trailer coupling * Trailer hitch – ball head * Payload approx. 3,880 kg * Vehicle number for customer inquiries: 4504 * 7.5 tonner, Comfort cab, 129 kW, Euro VI OBD Step E * AdBlue tank cover * Driver airbag * Trailer socket with wiring kit * Canter Series 469 * Limited-slip differential * Three-way tipper, 3600x2000x400 mm, single cab * Driver comfort suspension seat, horizontal suspension * Domestic sales (Germany) * Automatic climate control * MEILLER, ladder chassis, powder-coated, black * MEILLER, shovel/broom holder, Fuso * Engine specification, Euro VI OBD Step E, Canter * Radio with Bluetooth * Wheelbase 2800 mm * Reverse warning system * Heated exterior mirrors * Rear traction tires * Environmental badge (green) * Three-seater * Full service history No liability for typographical or printing errors Sale to trade customers only Subject to modification and prior sale. All information is non-binding. The description serves as identification of the vehicle and does not constitute a legal warranty. The agreement in the sales contract is binding. Ijdpsxxudxsfx Adnoa * TOP SERVICE & QUALITY * We are happy to provide you with a leasing / financing / hire-purchase offer * Warranty insurance available on request from the insurer * Technical inspection (TÜV) / accident prevention regulations (UVV LBW) / tachograph check and installation of OBU device by local partners * 30-day export license plates * All necessary export documents can be arranged individually upon request * Toll (Toll-Collect) can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number ---- Visit our website at * Constantly over 200 vehicles in stock

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201310504039 623534 -9805-130, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 700 mm Y-axis: 1000 mm Z-axis: 600 mm Maximum workpiece weight: approx. 730 kg Table height: 850 mm Machine footprint: approx. 1600 × 2100 mm Height: approx. 2800 mm 🧠 Accuracy & Performance Iedsxxu Hgepfx Adnja Length measurement error (MPE): VAST XXT: (1.8 + L/300) µm TP20/TP200: (2.2 + L/300) µm Probing error (MPE_P): VAST XXT: 1.8 µm TP20/TP200: 2.0 µm Scanning performance: Up to 500 points/sec VAST Navigator and Fly Mode for optimized path planning 🔧 Sensor & Probe Options Probe head: ZEISS VAST XXT or RDS articulating head Stylus length: Up to 150 mm (TL3 module) Stylus weight: Max. 15 g Angular positions: 20,736 with CAA correction Optional sensors: ZEISS ViScan (optical) ZEISS LineScan (laser triangulation) ZEISS DotScan (white light confocal) 🌡️ Environmental Conditions Operating temperature: 17–35 °C Guaranteed accuracy: 18–22 °C Humidity: 30–60% (non-condensing) Vibration damping: Integrated passive system ⚡ Utilities & Control Power supply: 100–240 V AC, 50–60 Hz Maximum power consumption: approx. 800 VA Compressed air: 6–8 bar, max. 120 Nl/min Controller: ZEISS C99L with CALYPSO software Protection class: IP53 Machine status: WORKING

Condition: used, This listing is for 1 of 2 BugLab BE2100 Biomass Sensor. The unit is in full working condition and is ready for immediate release. The BugLab BE2100 Biomass Sensor is an advanced, non-invasive sensor designed for real-time, in-situ monitoring of biomass concentration in bioreactors and fermenters. It is widely used in biopharmaceutical, biotechnology, and industrial fermentation applications to track microbial growth, providing valuable data for optimizing production processes. Key Features: Non-invasive: The BE2100 is designed to be used externally, which allows for real-time monitoring without the need to extract samples or disrupt the process. Real-time Biomass Monitoring: Provides continuous data on biomass concentration, enabling users to make on-the-fly adjustments to optimize growth conditions. Compatible with Bioreactors and Fermenters: Can be easily integrated into most existing fermentation systems, making it a versatile tool for various bioprocesses. Optical Density Measurement: Measures the optical density of the culture, correlating the light scattering properties of cells in the growth medium with biomass concentration. User-Friendly Interface: The sensor provides instant feedback on the biomass concentration, helping operators monitor growth phases more accurately. Advantages: Isdpfxsxxz Uwj Adnoa Sterility Maintained: Non-invasive design ensures that the process remains sterile, as there is no need to open or sample the bioreactor or fermenter. Accurate & Reliable: High precision measurements offer real-time insights into the biomass concentration, improving process efficiency. Low Maintenance: The external, non-contact design requires minimal maintenance, reducing operational downtime. Cost-effective: By providing real-time monitoring, the sensor can help avoid unnecessary batch failures, improving overall productivity and reducing costs.

Condition: used, mileage: 42,811 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 12/2022, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 400 mm, loading space volume: 3 m³, color: white, number of seats: 3, Year of construction: 2022, * FUSO 7 C 18 Tipper MEILLER 3-way with trailer hitch * Trailer hitch with ball head * Payload approx. 3,880 kg * Vehicle ID for customer inquiries: 4504 * 7.5-tonner, Comfort cab, 129 kW, Euro VI OBD Step E * AdBlue tank cover * Driver airbag * Trailer socket with wiring kit * Model series: Canter 469 * Limited slip differential * 3-way tipper, 3600x2000x400 mm, single cab * Driver comfort air-suspended seat, horizontal suspension * Domestic (Germany) * Automatic climate control * MEILLER, ladder frame, powder-coated, black * MEILLER, shovel/broom holder, Fuso * Engine version, Euro VI OBD Step E, Canter * Radio with Bluetooth * Wheelbase: 2,800 mm * Reversing alarm * Heated exterior mirrors * Rear traction tires * Environmental sticker (green) * Three-seater * Full service history No liability for printing or typing errors Sale only to business customers Subject to prior sale and errors. Changes, prior sale and errors reserved. The description serves to identify the vehicle and is not a guarantee in the sense of sales law. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING - FINANCING - HIRE PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device by our local partners * Export license plates for 30 days All export documents are possible, but must be requested individually * Toll for Toll-Collect can be booked in-house Iodpjxxud Ssfx Adnea * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: used, This listing is for a LEC Medical LSF151UK Freezer. The unit is in full working condition and is ready for immediate release. Isdpfxjxxyhpj Adnja The LEC Medical LSF151UK is a robust laboratory freezer tailored for secure and reliable sample storage. Here are its standout features: Key Features: - Temperature Control: Maintains a steady temperature of -18°C and below, ideal for preserving sensitive biological samples. - Anti-Microbial Handle: Designed to inhibit bacterial growth, this feature significantly reduces the risk of cross-contamination between stored items. - Control Panel Lock: Safeguards against accidental adjustments to temperature settings, ensuring your samples remain at optimal conditions. - Open Door Sensors: Alerts users if the door is left ajar, helping prevent unwanted temperature fluctuations that could jeopardize stored materials. - Energy Efficient R600a Refrigerant: This environmentally friendly refrigerant not only minimizes your carbon footprint but also lowers operational costs, making it a smart choice for labs. - Adjustable Shelf Heights: Customizable shelf arrangements allow for efficient use of space, accommodating various container sizes—from small vials to larger boxes. - Advanced Controller: Users can easily monitor the minimum and maximum temperatures while managing the warning alarm system, giving peace of mind regarding temperature integrity. - Auto Defrost Feature: Automatically defrosts the freezer to maintain efficient cooling and reduce manual maintenance. - Spark-Free Design: Safe for environments sensitive to electrical sparks, ensuring compliance with safety regulations. - Compact Design: Fits perfectly under most workbenches, and the rear rollers assist with mobility for cleaning or repositioning.

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Iodpoxxygxjfx Adnea Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: used, This listing is for 1 of 3 Serosep EntericBio Workstation. The unit is in full working condition and is ready for immediate release. The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. Iodpfxoxxygls Adnja - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: used, This listing is for 1 of 4 nonoperational Serosep EntericBio Workstation. This unit is supplied nonoperational and is ready for immediate release. Isdpsxxygfsfx Adnsa The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. Iodpfx Adoxxyf Ijnea The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. Iodpfoxxx U Iex Adnea - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.