Used Ring Debarker for sale (3,221)

Year of construction: 2005, condition: excellent (used), Horizontal automatic wrapping machine for narrow size products Fully automatic wrapping cycle with two standard cycles: - total wrapping Nodpfopfdh Nox Ah Hjwb - head and tail wrapping TECHNICAL DETAILS see prospect) complete plant with rollerways and return piece to the operator Very good conditions

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Nwjdepbbmljpfx Ah Hjb

Condition: ready for operation (used), Year of construction: 2020, Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Nedsxt Rmropfx Ah Hewb

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Njdpfx Ajxr Ityjh Howb Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports Nwedpfsxrd Rnsx Ah Hob • Digital displays (2 pcs.) • In accordance with CE standard

Condition: new, Ostas Profile Ring Bending Machine OPK 105 Technical Specifications: • Tool holder, shaft: 100 mm • Tool: 315 mm • Working speed: 7 m/min • Motor: 7.5 kW • Dimensions L-W-H: 1980 x 1450 x 1650 mm • Weight: 3130 kg • 3 driven rolls • Hardened standard rolls Njdpfxsxrd H Ne Ah Hswb • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working positions • Side angle guide rolls • Digital displays (2 pcs.) • Brake motor • Compliant with CE standard

Condition: used, Year of construction: 2000, Debarking unit type VK 32 Nwedswwladepfx Ah Hob !! Sale on behalf of customer !!

Condition: used, Impact ring wrench. 5135 Make Stahlwille Njdpfxodbc E Ee Ah Hswb 85 he

Condition: new, Colour: Grey Nodpfx Ahsn Tm Trj Hjwb It is a product that we have just added to our product range. Therefore, we can give very competitive price. One is currently in production. For detailed information, please contact us.

Year of construction: 2021, condition: new, Type: Portal crane Njdpfx Aepa Rrzsh Howb It is a product that we have just added to our product range. Therefore, we can give very competitive price. One is currently in production. For detailed information, please contact us.

Condition: used, functionality: fully functional, For sale on behalf of a customer. Completely overhauled and supplied by us in 2008, in operation until 2024. Factory-new AirTen rotor, used only for a short period. Includes various spare parts and complete documentation. Includes infeed and outfeed conveyor as well as frame. Nodpfx Ahexnz Rkj Howb

Condition: good (used), - usefull spare parts for VK 26 - feeding wheels - assembling tools - different small items and parts for different purposies Nedpfxsxnn U Ae Ah Hswb - the main frame of the rotor

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm Nwodpfx Asfvbphoh Hjb - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Nwsdpfx Ahou Hmacj Heb Machine workshop checked Machine cleaned and repainted

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Nwodpfsxbtx Hjx Ah Hob Weight: approx. 200 kg

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Njdpfx Ahjxbtxys Howb Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Roll speed: 26 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg

Condition: good (used), Year of construction: 2003, Wampfler GS 21-05/1812/04ML/LT Slip Ring Assemblies GS 21 Technical Details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of Manufacture: 2003 • Protection Class: IP54 • Design: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Application: Slip ring assemblies for the safe transmission of power and signals in rotating applications, including: • Crane systems • Lifting and conveyor technology • Wind turbines • Mechanical engineering Nwodpsxl Avpjfx Ah Hob Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, BPR BA 35 CNC Nwedpoxivfxofx Ah Heb Three-Roller Ring Bending Machine, Hydraulic AS-NEW CONDITION MACHINE Shaft diameter: 35 mm Roller diameter: mm on request Shafts made of high-strength steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft rotation (variable): 0-30 rpm Working position: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roller Three powered rollers with smooth surface BPR Probending CNC electronic control system Hydraulic cylinder pressing force: 5,500 kg Working pressure: 190 bar

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Nwedpjxhf N Dsfx Ah Hsb

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Nedpfsxhdtzox Ah Howb 6-month warranty

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Manufactured in 2005 Serviced in 2023, not in use since Nwjdpfoxg Tthjx Ah Hob

Condition: used, Valon Kone VK450 with infeed conveyor. Nwjdpfjvt S R Aox Ah Hsb

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Njdpfx Ahsvgtz Ns Hswb

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Nwodpfx Ahjxd D Nnj Heb

Condition: used, Polystruder Extruder with Berringer water ring Pelletizer, 250 HP, 3 phase motor, with screen changer, includes spin dryer, and hopper. Nodpfx Aexd D I Deh Howb