Used Rent Bavaria for sale (810)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Iiedezw Apgjpfx Ahysh Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), mileage: 7,086 km, power: 132 kW (179.47 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 65 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, total length: 6,250 mm, total width: 2,150 mm, total height: 2,800 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2024, General Information Number of doors: 2 Cabin: single Registration: V-02-JJG Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: Automatic, 6 gears, automatic Maximum front axle load: 1,850 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,715 kg Payload: 785 kg Iiodoyba Trepfx Ahyjh Gross vehicle weight: 3,500 kg Maintenance APK (Periodic Technical Inspection): valid until 11/2027 Condition Technical condition: very good Optical condition: very good Damage: none Financial Information Price: On request VAT/margin scheme: VAT deductible Further Information Please contact Jelmer Broekhuizen, Mike Kornet or John De Frankrijker for further information.

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65R22,5, color: white, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Notes = Fully equipped: - Remote control - Small turret in the front panel - Smartboard - 6x round tail lights - Powersheet automatic tarpaulin For more information, contact Mark van der Steen. = Additional Information = General Information Year of manufacture: 2026 Design year: 2026 Iiodpfxsz R N U Ns Ahysh Axle Configuration Tire size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Lift axle; Tire tread left: 100%; Tire tread right: 97% Weights Unladen weight: 6,950 kg Payload: 38,050 kg GVW: 45,000 kg Additional Information Please contact Mark van der Steen for further information.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Ijdpex Ezkhjfx Ahyjih

Condition: used, machine/vehicle number: 26612, Year of construction: 2013, operating hours: 6,857 h, load capacity: 2,500 kg, lifting height: 5,510 mm, free lift: 1,720 mm, fuel type: diesel, mast type: triplex, construction height: 2,470 mm, Equipment: sideshift, .: 26612 Device details: Year of manufacture: 2013 Load capacity: 2500 kg Lifting height: 5510 mm Recorded operating hours: 6857 h Free lift: 1720 mm Mast type: Triplex Mast height: 2470 mm Length/Width/Height: 2700 / 1200 / 2200 mm Operating weight: 3830 kg ---- Equipment: * Canopy * 3rd valve * Partial cabin * Full free lift * Work light (front) ----- Attachments: * Side shifter ---- Additional device information: * Rotating beacon ---- Iiodpfozb H Ngex Ahyoh The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Subject to prior sale and errors in this offer. In dealer sales, the device is sold in its current condition, without refurbishment. All information is without guarantee; errors and changes are subject to change.

Condition: used, machine/vehicle number: 26766, Year of construction: 2021, operating hours: 1,540 h, load capacity: 1,600 kg, lifting height: 4,300 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, .: 26766 Device details: Year of manufacture: 2021 Load capacity: 1600 kg Lifting height: 4300 mm Recorded operating hours: 1540 h Free lift: 1400 mm Mast type: Triplex Mast height: 1920 mm Length/width/height: 2300 / 800 / 1240 mm Operating weight: 1419 kg Battery from: 2021 ---- Equipment: * Initial lift * Full free lift * DGS made of Plexiglas ---- Additional device information: ---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? Ijdpjz Uaxxofx Ahyeih You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In dealer sales, the device is sold in its current condition, without any refurbishment. All information without guarantee, errors and changes reserved.

Condition: good (used), mileage: 400,817 km, power: 140 kW (190.35 HP), first registration: 05/2014, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x4, wheelbase: 3,670 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,050 mm, total width: 2,020 mm, total height: 3,030 mm, loading space length: 3,300 mm, loading space width: 1,770 mm, loading space height: 1,960 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - Manual - Radio/Cassette - Rearview camera - Fabric - Partition - Xenon lamp = Notes = Configuration: 4x4, Payload: 856 kg, Tare weight: 2644 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 2000 kg, Tow hitch, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Parking assist: None, Electric windows, Electric mirrors, Partition, Radio/Cassette, GPS navigation, Color: Multicolor, Heated mirrors, Rearview camera, Lighting type: Xenon lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 140 kW (188 hp), Number of cylinders: 6, Displacement: 2987 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat covering: Fabric, Seat adjustment: Manual, L2H2 V6 3.0 LTR ac automatic 4X4! Limited-slip differential, auxiliary heater, camera, EURO6, cruise control, xenon, spare wheel, spare wheel tread: 5 %, tire type: all-season tires = Additional Information = General Information Number of doors: 1 License plate: VH-575-S Iodpjz Snb Defx Ahyjih Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire size: 235/65R16; Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 2: Tire size: 205/75R16; Dual tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 8 mm Weights Unladen weight: 2,644 kg Payload: 856 kg GVWR: 3,500 kg Functional Loading platform height: 82 cm Maintenance APK (Periodic Vehicle Inspection): valid until 05.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands in various model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry through our website. Ask directly about our European warranty package.

Year of construction: 2022, operating hours: 30 h, condition: new, functionality: fully functional, working width: 2,000 mm, As good as new condition Bakker Magnetics 104 Excenbtric eddy current separator for sale. Isder D R Svepfx Ahyjih Trade fair demonstration unit. The latest eccentric eddy current "104" X Ecentric was specially developed and designed for the separation of non-ferrous metals from e.g. bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has a very high number of poles and operates at a speed of 3,600 rpm. The 104 rotor generates a field frequency of 1.56 kHz

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Weight: 1100 kg Electrical data: 400 V Iijdpfx Aszv S A Tjhyoh Belt dimensions: 1340 × 650 mm Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: used, empty load weight: 7,821 kg, maximum load weight: 28,179 kg, overall weight: 36,000 kg, first registration: 04/2025, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, tail-lift, Schmitz Cargobull Closed Box / Double-Deck / Lift-Axle / Pallet Box / Rental / RENT Schmitz Closed Box - Standard - Double-Deck - Internal dimensions (LxWxH): 13.60 x 2.48 x 2.70 m - ABS/EBS - Lift-Axle - Tail Lift - SAF Axles - Tires: 385/55R22.5 German vehicle! Export price! Schmitz Closed Box - Standard - Double-Deck - Internal dimensions (LxWxH): 13.60 x 2.48 x 2.70 m - ABS/EBS - Lift-Axle - Tail Lift - SAF Axles - Tires: 385/55R22.5 German vehicle! Export price! Schmitz Boxes - Standard - Double canopy - Interior dimensions (L x W x H): 13.60 x 2.48 x 2.70 m - ABS/EBS - Removable axle - SAF axles Iiedswag Dvepfx Ahyeh - Tires: 385/55R22.5 German vehicle! Export price!     Errors and prior sale excepted. All information is provided without guarantee. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchases and sales extend beyond national borders; therefore, you will generally find the export price in our advertisements, as this is independent of the place of use.   Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be viewed as non-binding general information and does not replace detailed, individual advice when making a purchasing decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos, and advance sales.   Our general terms and conditions apply exclusively.     Languages - We speak English - We speak French - We speak German - We speak French - We speak Polish - We speak Spanish - We speak Portuguese - We speak Italian

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. Iisdpfx Ahewqz Nneyeh - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: good (used), mileage: 352,700 km, power: 132 kW (179.47 HP), first registration: 03/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,350 mm, fuel: diesel, color: yellow, gearing type: mechanical, number of gears: 6, emission class: euro6, Equipment: ABS, air conditioning, central locking, electric window regulation, power assisted steering, = Additional options and accessories = - Radio and audio system - Speed limiter = Special features = ZCFC670D505342286 Iedpfsz Sn Rqsx Ahyoih = More information = Year of manufacture: 2019 Front axle: Steerable Number of cylinders: 4 Engine capacity: 2,998 cc Unladen weight: 3,600 kg Payload: 3,525 kg GVW: 7,200 kg Technical condition: good Optical condition: good

Condition: good (used), mileage: 144,050 km, power: 353 kW (479.95 HP), first registration: 01/2021, fuel type: diesel, tire size: 315/60R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: air conditioning, central locking, cruise control, electric window regulation, fridge, second fuel tank, traction control, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Lane departure warning system - Radio and audio system - Disc brakes - Sleeper cab - Speed limiter - Enhanced engine brake - Sun visor = Special features = XLRTEM4300G337944 = More information = Ijdpfxoz Rnmpj Ahyeih Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Transmission Transmission: TRAXON, Automatic Axle configuration Brakes: disc brakes Front axle: Tire size: 315/60R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: leaf spring suspension Rear axle: Tire size: 295/60R22.5; Dual tires; Tire tread depth inner left: 30%; Tire tread depth outer left: 30%; Tire tread depth inner right: 30%; Tire tread depth outer right: 30%; Suspension: air suspension Functional Body manufacturer: ZF Maintenance, history, and condition MOT: valid until Jan. 2027 Technical condition: good Optical condition: good

Condition: reconditioned (used), - Non ferrous eddy current separator type Wagner - with vibration feeder - Conveyor width 1200 mm - overhauled condition Iijdpfx Aoz Ihhgshyjh - ready to work

Condition: used, empty load weight: 7,821 kg, maximum load weight: 28,179 kg, overall weight: 36,000 kg, first registration: 04/2025, loading space length: 1,360 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 9 m³, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, Schmitz Cargobull box / double floor / lift axle / pallet box / rental / RENT Schmitz box - Standard - Double floor - Internal dimensions (LxWxH): 13.60 x 2.48 x 2.70m - ABS/EBS - Lift axle - SAF axles - Tires: 385/55R22.5 German vehicle! Export price! Schmitz Closed Box - standard - Double stick - Internal dimensions (LxWxH): 13.60 x 2.48 x 2.70m - ABS/EBS - Lift axle - SAF axles - Tyres: 385/55R22.5 German vehicle! Export price! Coffrets Schmitz - Standard - Double cane - Dimensions intérieures (LxlxH) : 13,60 x 2,48 x 2,70m - ABS/EBS - Essieu relevable - Essieux SAF - Tires : 385/55R22.5 Iiodjvih Dwspfx Ahyeh Véhicule allemand ! Prix d'exportation ! Subject to errors and prior sale. All information without guarantee. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typing errors and prior sale. Our general terms and conditions apply exclusively. Languages - We speak english - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, mileage: 815,550 km, power: 132 kW (179.47 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2011, Equipment: tail-lift, XLRAEL45FF0L363973 Faulty power pack, vehicle is not drivable!!!! Different location: TRUCK TRADING ANTWERPEN BIJKHOEVELAAN 6 2110 WIJNEGEM = More information = Technical information Number of cylinders: 4 Engine capacity: 4,500 cc Front axle: Steerable Rear axle: Dual wheels Weights Unladen weight: 6,360 kg Payload: 5,630 kg GVW: 11,990 kg Condition Overall condition: poor Iodpfx Ahsz Rvwioyeih Technical condition: poor Visual condition: poor

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Iodoyluicjpfx Ahyeih Note on Item Condition: Without software/PC

Year of construction: 2025, operating hours: 250 h, condition: excellent (used), functionality: fully functional, Rent Your Vacuum Solution Iedpfxozx N N Ae Ahysih Work stoppage or a temporary challenge in your business? From industrial vacuum cleaners to vacuum loaders, rent short or long term — safe and simple. Need a flexible solution without the commitment of ownership? DISAB SkipVAC™ is available to rent, giving you the same powerful suction and high collection capacity on a temporary basis — ideal for short-term projects, seasonal peaks, or general cleaning campaigns across your industry. DISAB SkipVAC™ is easy to move, empty and use, making it useful in more places across your facility — indoors or outdoors. Compact and user-friendly, it becomes a reliable partner in daily clean-up work, reducing dust and particles in the work environment without wearing on the body. DISAB SkipVAC™ is optimal for temporary suction needs such as general cleaning, spillage collection, and waste removal across most industrial and factory environments. Material is drawn into the settling chamber of the filter separator, where heavier debris falls to the bottom of the dust container while air passes through the main filter, capturing dust particles for a cleaner working environment. The container-like body is easily emptied — the upper part lifted off by forklift, with the collected material transported to the emptying site.

Condition: reconditioned (used), Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Iijdsw T Un Uopfx Ahysh Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: new, mileage: 5 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Remarks = Mercedes-Benz Arocs 4140K 8x4/4 Meiller Tipper – Euro 3 The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is built for demanding construction, mining and infrastructure applications. Its heavy-duty chassis, powerful Mercedes-Benz engine and genuine Meiller rear tipper body make it a reliable solution for transporting sand, gravel, rock, soil and other bulk materials. Key Highlights - Factory-new Mercedes-Benz Arocs 4140K 8x4/4 - 12.8-litre Mercedes-Benz OM460 Euro 3 engine - 394 hp (294 kW) - 1,900 Nm torque - Mercedes PowerShift automatic transmission - 41,000 kg gross vehicle weight - Heavy-duty 8x4 chassis - Reinforced suspension Iijdpfx Ahey Tml Teysh - High ground clearance - Genuine German Meiller H436 rear tipper body - 20 m³ tipper capacity - Wear-resistant steel tipper body - Meiller hydraulic tipping system - Ready for worldwide export Built for Heavy-Duty Work The Arocs 4140K combines strong traction, stability and durability for intensive daily operation. Its reinforced chassis and suspension support reliable performance on construction sites, quarry roads and mining locations, while the Mercedes PowerShift transmission provides smooth and controlled operation. The genuine Meiller rear tipper body is designed for efficient transport and unloading of bulk materials. Its robust construction and proven hydraulic system make this truck suitable for frequent tipping cycles and demanding working conditions. Applications - Construction and earthmoving - Mining and quarry operations - Road and infrastructure projects - Transport of sand, gravel, rock, soil and demolition material Technical Specifications Vehicle: Mercedes-Benz Arocs 4140K 8x4/4 Condition: Factory-new Engine: Mercedes-Benz OM460 Euro 3 Power: 394 hp / 294 kW Torque: 1,900 Nm Transmission: Mercedes PowerShift automatic Drive: 8x4 GVW: 41,000 kg Tipper body: Genuine Meiller H436 Capacity: 20 m³ Dimensions: 8,282 x 2,500 x 3,700 mm Vehicle weight: 16,000 kg Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for current availability, export options and worldwide delivery. = More information = General information Year of manufacture: 2024 Year of construction: 2024 Technical information Engine capacity: 12.800 cc GVW: 41.000 kg Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Suspension: leaf suspension Functional Make of bodywork: Meiller Tipper: Back Other information Availability: in stock Body model: H436 Rent kmly price currency: EUR

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Remarks = Mercedes-Benz Arocs 4140K 8x4/4 Meiller Tipper – Euro 3 The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is built for demanding construction, mining and infrastructure applications. Its heavy-duty chassis, powerful Mercedes-Benz engine and genuine Meiller rear tipper body make it a reliable solution for transporting sand, gravel, rock, soil and other bulk materials. Key Highlights - Factory-new Mercedes-Benz Arocs 4140K 8x4/4 - 12.8-litre Mercedes-Benz OM460 Euro 3 engine - 394 hp (294 kW) - 1,900 Nm torque - Mercedes PowerShift automatic transmission - 41,000 kg gross vehicle weight - Heavy-duty 8x4 chassis - Reinforced suspension - High ground clearance - Genuine German Meiller H436 rear tipper body - 20 m³ tipper capacity - Wear-resistant steel tipper body - Meiller hydraulic tipping system - Ready for worldwide export Built for Heavy-Duty Work The Arocs 4140K combines strong traction, stability and durability for intensive daily operation. Its reinforced chassis and suspension support reliable performance on construction sites, quarry roads and mining locations, while the Mercedes PowerShift transmission provides smooth and controlled operation. The genuine Meiller rear tipper body is designed for efficient transport and unloading of bulk materials. Its robust construction and proven hydraulic system make this truck suitable for frequent tipping cycles and demanding working conditions. Applications - Construction and earthmoving Isdpfx Ahoy Rt Shsyeih - Mining and quarry operations - Road and infrastructure projects - Transport of sand, gravel, rock, soil and demolition material Technical Specifications Vehicle: Mercedes-Benz Arocs 4140K 8x4/4 Condition: Factory-new Engine: Mercedes-Benz OM460 Euro 3 Power: 394 hp / 294 kW Torque: 1,900 Nm Transmission: Mercedes PowerShift automatic Drive: 8x4 GVW: 41,000 kg Tipper body: Genuine Meiller H436 Capacity: 20 m³ Dimensions: 8,282 x 2,500 x 3,700 mm Vehicle weight: 16,000 kg Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for current availability, export options and worldwide delivery. = More information = General information Year of manufacture: 2024 Year of construction: 2024 Technical information Engine capacity: 12.800 cc GVW: 41.000 kg Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Suspension: leaf suspension Functional Make of bodywork: Meiller Tipper: Back Other information Availability: in stock Body model: H436 Rent kmly price currency: EUR

Condition: new, mileage: 3 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Remarks = Mercedes-Benz Arocs 4140K 8x4/4 Meiller Tipper – Euro 3 The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is built for demanding construction, mining and infrastructure applications. Its heavy-duty chassis, powerful Mercedes-Benz engine and genuine Meiller rear tipper body make it a reliable solution for transporting sand, gravel, rock, soil and other bulk materials. Key Highlights - Factory-new Mercedes-Benz Arocs 4140K 8x4/4 - 12.8-litre Mercedes-Benz OM460 Euro 3 engine - 394 hp (294 kW) - 1,900 Nm torque - Mercedes PowerShift automatic transmission - 41,000 kg gross vehicle weight - Heavy-duty 8x4 chassis - Reinforced suspension - High ground clearance - Genuine German Meiller H436 rear tipper body - 20 m³ tipper capacity - Wear-resistant steel tipper body - Meiller hydraulic tipping system - Ready for worldwide export Built for Heavy-Duty Work The Arocs 4140K combines strong traction, stability and durability for intensive daily operation. Its reinforced chassis and suspension support reliable performance on construction sites, quarry roads and mining locations, while the Mercedes PowerShift transmission provides smooth and controlled operation. The genuine Meiller rear tipper body is designed for efficient transport and unloading of bulk materials. Its robust construction and proven hydraulic system make this truck suitable for frequent tipping cycles and demanding working conditions. Applications - Construction and earthmoving - Mining and quarry operations - Road and infrastructure projects - Transport of sand, gravel, rock, soil and demolition material Technical Specifications Vehicle: Mercedes-Benz Arocs 4140K 8x4/4 Condition: Factory-new Engine: Mercedes-Benz OM460 Euro 3 Power: 394 hp / 294 kW Torque: 1,900 Nm Transmission: Mercedes PowerShift automatic Drive: 8x4 GVW: 41,000 kg Tipper body: Genuine Meiller H436 Capacity: 20 m³ Dimensions: 8,282 x 2,500 x 3,700 mm Vehicle weight: 16,000 kg Why Schaften Automotive? Schaften Automotive specialises in supplying factory-new Mercedes-Benz, MAN, IVECO and Scania trucks for international markets. We support customers with vehicle sourcing, export documentation, custom body solutions, international transport and worldwide delivery. With extensive experience in heavy-duty, construction, mining and transport vehicles, we provide complete truck solutions for customers across Africa, the Middle East and other export markets. Contact our team for current availability, export options and worldwide delivery. = More information = General information Year of manufacture: 2024 Year of construction: 2024 Iisdpfx Aezrm Nmshyjh Technical information Engine capacity: 12.800 cc GVW: 41.000 kg Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Suspension: leaf suspension Functional Make of bodywork: Meiller Other information Availability: in stock Body model: H436 Rent kmly price currency: EUR

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Iisdpfx Ahjwi Smueyjh Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: good (used), mileage: 52,050 km, power: 100 kW (135.96 HP), first registration: 06/2024, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, color: black, gearing type: automatic, emission class: euro6d, number of seats: 9, Equipment: Bluetooth, air conditioning, central locking, electric window regulation, power assisted steering, tire pressure monitoring, = Additional options and accessories = - Reversing camera - Disc brakes = Special features = Iiedpfoz Eg Igex Ahysh W1VVKFFZ3R4382421 = More information = Year of manufacture: 2024 Number of cylinders: 4 Engine capacity: 1,950 cc GVW: 3,200 kg Technical condition: good Optical condition: good Reserved: This vehicle is reserved for a customer (sold subject to confirmation).

Condition: used, mileage: 471,000 km, power: 169 kW (229.78 HP), first registration: 06/2020, fuel type: diesel, tire size: 245/70R17.5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, fuel tank capacity: 185 l, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, power assisted steering, tail-lift, = Additional options and accessories = - Lane departure warning system - Radio and audio system - Disc brakes - Sun visor = Special features = XLRAEL1700L497341 = More information = Availability Reserved: This vehicle is reserved for a customer (sold subject to confirmation). Technical information Number of cylinders: 6 Engine capacity: 6,700 cc Axle configuration Tire size: 245/70R17.5 Brakes: disc brakes Front axle: Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Suspension: air suspension Weights Unladen weight: 6,250 kg Payload: 5,665 kg Iedpfez Ruiwjx Ahyeih GVW: 11,990 kg Functional Tail lift: D'HOLLANDIA, 1,500 kg Maintenance MOT: valid until May 2027