Used Rema Dp 15 for sale (83)

Condition: excellent (used), Double grinding wheel stand Rema / Schulmaschine Wheel dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (RPM): 1450 Voltage: 380 Volt Lamp Protective shields Location: Available from stock in 54634 Bitburg Lsdpfx Abohaf Ndozeag - immediately available -

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with ⌀300, 350 mm main blade) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring saw 8800 rpm Blade tilt 0 - 45° Max. cutting length 2500 mm Moving table stroke 3400 mm Cutting width with the longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set at an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Ledpfx Abezx Du Tszjag Weight 650 kg

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with main blade ⌀300, 350 mm) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Laedpfozx Dumjx Abzog Rotation speed 4000 rpm Rotation speed of scoring saw 8800 rpm Blade tilt 0 - 45° Max. cutting length 1500 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set to an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm Ledpfx Aovmfawobzoag High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Laedpfx Aszwgt Nebzjg Total height: 1100 mm Weight: approx 80 KG

Condition: excellent (used), CATALOGUE NUMBER 7991 TECHNICAL DATA - max saw blade diameter: 400 mm - saw blade bore diameter: 30 mm - blade guard - height-adjustable arm Lsdpsztq Ntofx Abzoag - max cutting height: 120 mm - max cutting width: 540 mm - hydraulic saw feed - 3 infeed rollers on the table - motor: 3.7 kW - hydraulic pump motor: approx. 0.55 kW - extraction port diameter: 110 mm - roller width: 530 mm - machine dimensions (L/W/H): 1900x1500x1950 mm - weight: 650 kg ADVANTAGES – Polish manufacture – DTR documentation – very good condition – used saw Net price: 13,900 PLN Net price: 3,300 EUR (depending on the exchange rate of 4.2 PLN/EUR) (Prices may change in case of significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8018 TECHNICAL DATA - max. blade diameter 400mm - blade bore diameter 30mm - blade guard - adjustable arm (up/down) - max. cutting height 100mm - max. cutting width 540mm - hydraulic blade feed - 2 infeed rollers on the table Ledpfx Aoztqv Hobzoag - outfeed roller on the table - motor 3.7kW - hydraulic pump motor approx. 0.55kW - diameter of dust extraction port 100mm - roller width 530mm - dimensions of the infeed roller table 2000x640x910mm - dimensions of the outfeed roller table with scale 2000x640x965mm - machine dimensions (L/W/H) 1900x1540x1820mm - weight approx. 750kg ADVANTAGES – manufactured by the Polish brand REMA – DTR documentation (Technical Documentation) – roller tables – very good condition – used saw Net price: 15900 PLN Net price: 3786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 213, functionality: fully functional, input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, For sale: a professional, Polish-made REMA Fx500 panel saw, manufactured in 2021. The machine is used in the furniture industry and excels at precisely cutting particleboard and MDF panels. The machine is in continuous operation, well-maintained, and regularly serviced. It operates on a single shift, on weekdays from 6:00 AM to 2:00 PM, and is not subjected to multi-shift operation. Key information and technical condition: Model: REMA Fx500 Year of manufacture: 2021 Power: 8.5 kW Power supply: 400V (3 phases), 50Hz Scoring saw with a separate 0.75 kW motor Laodpfxjzvymas Abzsg Digital display Condition: Very good, fully functional, ready for immediate use Usage history: single-shift operation (Monday to Friday)

Condition: excellent (used), Model MAC 2 British Rema Aerosplit dynamic air classifier for high efficiency separation of soft to medium hard dry powders in the 150 - 10 micron size range. Classifier was manufactured in 2005 but was never installed. Machine No. H61802. Installed Power - 11 kW. Airflow - 6,000 m3/hour MAC 2 is now known as the model 450. Can be operated either in an independent air classification system or in closed circuit with a mill. Classifier offered as machine only but can be supplied with ancillary equipment and controls if required. Machine offered in "as is" condition with no warranty given or implied. Inspection invited at our premises in Uttoxeter, Staffordshire. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience, we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Lasdpfx Aozvgklobzeg Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Ljdjzvbldepfx Abzeag Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm Laedpfxezryuvs Abzog

Condition: ready for operation (used), Rema-4-Station Grinding Machine -Angle adjustable -Tilt adjustable -Oscillating -Cooling system -Work light Dimensions: L x W x H 1.5 x 1.5 x 1.5 meters / Weight 450 kg Errors and omissions excepted. Lodpfsztdzpex Abzsag

Year of construction: 1988, condition: good (used), machine/vehicle number: 108267, Steel grinding machine Lasdpfx Abjfhy Shszeg Offer number: 20064 Manufacturer: REMA Type: DS 12 ST Machine No.: 108267 Year of manufacture: 1988 Technical data: - Grinding wheel diameter: approx. 125 mm - 2 wheel speeds: 1450 / 2200 rpm - Right and left rotation - Tilting, fixed support table ATF: 340 x 150 mm - Support table, tiltable from -5° to +15° - Lighting - Drive: 400 V / 0.65 / 0.9 kW - Working height: 1000 mm - Space requirement: approx. W 850 x H 1150 x D 550 mm - Weight: approx. 120 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 044092, Offer 22148 Technical data: Lajdpfxsiba R Nj Abzeg - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Disc speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Year of construction: 1985, condition: good (used), machine/vehicle number: 013125, Offer 21283 Technical data: - Grinding wheel diameter: approx. 500 mm - Grinding wheel width: approx. 50 mm - Grinding wheel bore: approx. 127 mm - Disc speed: 950 rpm Laodei Daw Tjpfx Abzeg - Drive: 400 V / 3.3 kW - Working height: approx. 800 mm - Working depth / safety guard depth adjustable - Connections for dust extraction hose: 100 mm - Space requirement: approx. W 1250 x H 1150 x D 650 mm - Weight: approx. 350 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: D 49468, Offer 18014 Technical data: - Grinding wheel diameter approx. 125 mm - 2 wheel speeds 1450 / 2200 rpm - Clockwise and counterclockwise operation - Adjustable, fixed support table ATF 340 x 150 mm - Support table can be tilted from -5° to +15° - Illumination - Drive 400 V / 0.65 / 0.9 kW - Working height 1000 mm - Space required approx. W 850 x H 1150 x D 550 mm Laedpfx Absk Rartezeg - Weight approx. 120 kg

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Laodpjzp Nz Hsfx Abzsg Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Lsdpfxjzp Nyce Abzsag Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: ready for operation (used), Year of construction: 1996, Grinding wheel diameter: 280 mm Grinding wheel width: 30 mm Ledozhu Dwspfx Abzjag Grinding wheel speed: 2900 rpm Electrical connection: 400 V, 0.9 kW Space required: 600 x 270 x 1100 mm

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Wingspan: 5 to 37 mm -Load capacity: 6000 kg -Weight: 22 kg Lajdpfxjb A I Dde Abzeg

Condition: good (used), Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 1/200 -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/420/H1420 mm -Weight: approx. 72 kg Ljdpfxenymgae Abzjag

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Ledpjb A Swasfx Abzjag -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW Laodpfxjb A Rbgo Abzjg -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Laodpoxxl Hqofx Abzog -Span: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminal available -Price: per piece -Weight: 28 kg/piece

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm Lodpfxspcmt Ns Abzoag -Weight: 143 kg with pallet