Used Reel Slitter for sale (898)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: Giodsyx Uy Aopfx Ab Dst A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: DFQ1300C3-2 high speed slitting machine, 1. Specification: Slitting Material: Plastic film (15µm–150µm), paper (30–400gsm) Maximum Web Width: 1,300 mm Minimum Slitting Width: 50 mm Mechanical Speed: 350 m/min Slitting Speed: 300 m/min (depending on material) Unwinding Diameter: Ø1,100 mm (shaftless type, includes 3” and 6” clamp adapters) Gedpfx Aeyuwqzsb Djit Rewinding Diameter: 2 × Ø600 mm Rewinding Shaft: 3” differential slip air shaft or air shaft Main Motor: 7.5 kW AC servo motor Rewinding Motor: 2 × 5.5 kW AC servo motors Unwinding Tension: 200 Nm magnetic brake Waste Blower: 2.2 kW high-pressure blower Drive System: Synchronous belt and V-belt Guiding Roller: Ø100 × 1,750 mm, hard aluminum alloy (HV700) Mechanical Structure: Cast iron and steel plate Web Guiding: EPC (Edge Position Control) Main Control: PLC + touchscreen Total Power: Approx. 28.2 kW Overall Dimensions: 3,700 × 2,700 × 1,400 mm Weight: Approx. 4,500 kg Standard Equipment: - Shaftless unwinding unit with 3” and 6” chucks - Hydraulic lifting system - Unwind web clamping device (splicing table included) - Line and edge web-guiding system - Slitting section - Razor and rotary blade cutter system - Laser paper core positioning system - Double rewind unit with air shaft - Constant tension pressing structure with web pinching device - Trim removal system (trim blower) - Electrical components - MITSUBISHI brand PLC - YASKAWA brand drives - Touchscreen operation Optional: 1) Differential slip rewind air shaft: 2 pieces

Year of construction: 1996, condition: used, Technical details: • Working width: 400 mm Gsdpfsyub Siex Ab Dsit • Max. speed: up to 150 m/min • 20 magnetic cylinders included • Die-cutting station with magnetic cylinders • Slitting unit • Matrix waste removal • Rewinding unit for finished rolls • Suitable for self-adhesive label materials (paper and film)

Year of construction: 2024, condition: used, Working Width: 1350 mm Maximum Speed: 400 m/min Maximum Unwinder Roll Diameter: 1300 mm Unwinder Core Diameter: 76 mm Maximum Rewinder Roll Diameter: 1300 mm Rewinder Core Diameter: 76 mm Minimum Slitting Width: 25 mm Maximum Number of Knives: 30 Processed Material: Paper Material Weight: 50 – 200 g/m² Main Drive Motor: AC 3-phase motor – 30 kW Electrical Requirement: 400 V, 50/60 Hz, 3 Phase Electrical Power: 35 kVA Compressed Air Requirement: 6 – 7 bar Air Consumption: 200 NL/min Machine Configuration Unwinding Section • Unwinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core • Pneumatic brake with measuring roller for web tension control • Hydraulic lift-in system for mother rolls • Motorized lateral adjustment of unwind stand Slitting Section • Knife system with 25 top knives and bottom knives • Knife positioning adjustable without spacers Rewinding Section • Rewinding station for rolls up to Ø 1300 mm • Pneumatic expanding shaft for 76 mm core • Pneumatic nip roller • Hydraulic unloading of finished rolls • Safety guards with light barrier Control System PLC: Siemens SIMATIC DP ET 200 SP / CPU 1500 Operator Interface: Touch Panel 700 Comfort • Failure message display • Multi-language interface (DE / EN / FR / ES / RU) • Web tension control • Speed limitation adjustment • Meter counter • Hour counter • Pre-set meter counter with stop function • Diameter pre-setting with stop function Gedoyt I A Espfx Ab Dsit • Speed control • Ethernet modem for remote diagnostics and maintenance

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Giodpfxoyt H R Is Ab Dot Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition Gedpfxjhubgwe Ab Doit

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Giedpoytqxpsfx Ab Dst

Condition: used, Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK in good working condition. Rollenschneider Aufwickler / Slitter Rewinder Kampf Conslit 16/06 ÜK Baujahr / Year 1999 - Serial-No. 210271 Arbeitsgeschwindigkeit / Speed max. 550m/per Minute Giodpfeylw Disx Ab Dst Arbeitsbreite / Working width max. 1650mm Schnittbreite min. 50mm bei Hülsen 70 & 76mm /  Cutting width min. 50mm  Cutting width 70 & 76mm Schnittbreite min. 200mm bei Hülsen 152mm /  Cutting width min. 200mm  Cutting width 152mm Zu verarbeitendes Material / Material to be processed: Kunststofffolien aus / plastic films made of: PE, PP, PA, PET, PVC, Papiere und Laminate Hartfolien / hard films ca. 10 - 250 µm Weichfolien / Soft films ca. 20 - 500 µm Aufwicklung / Rewinder Aufwickel-Druchmesser / Rewinder Diameter max. 610mm Aufwickelhülse / Winding Sleeve: Pappe, Kunststoff oder Metall / Cardboard, Plastic or Metal Innendurchmesser d. Hülse / Diameter inside 70mm, 76mm and 152mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors Gedpsylil Esfx Ab Doit -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Gedpfx Abs A Dimo Djit

Year of construction: 1968, condition: good (used), for aluminium Gsdsgryk Njpfx Ab Doit strip width: max. 1.050 mm strip thickness: 10 - 20 mic

Condition: used, Grafisk Maskinfabrik - Slitter Rewinder LS-350 Working width: 350 mm Gijdpfx Asylc Umeb Dot Connection voltage: 400V

Condition: good (used), Reel, reel rod, trapezoidal thread spindle, spindle -Reel: Reel rod with quick-release fastener Gedpfjykp S Asx Ab Dsit -Type: unfortunately without a type designation -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, JOVAL GUILLOTINE CB-2000 Gjdpfeyrnn Sex Ab Dsit Guillotine for cutting plastic and paper reels Cutting force 25 t Cutting width up to 2000 mm Reel diameter up to 1500 mm Motor power 10 HP Equipped with special steel blades Guiding system with replaceable guides Year 2010

Condition: good (used), functionality: fully functional, Used slitter rewinder Goebel Gjdpfx Abeyqx Dno Djit 2 shafts on unwinder max diameter on unwinder - 650 mm max web widght - 2200 mm

Condition: used, functionality: fully functional, working range: 2,320 mm, Slitter rewinder Goebel Giodpfx Aboypua Ao Djt web widht - 2320 mm rotary mechanism at the receiving station

Condition: new, Year of construction: 2024, For sale is a robust ELMAG EUROREEL AIR 15 automatic hose reel 42181 with metal housing. The all-round reel is still unused and therefore in new condition. Technical data: - 15 m hose length (PU) Ø 8x12 mm + 2 m supply line - Max. working pressure 15 bar - With Euro-standard coupling (¼") - Weight 8 kg - Free shipping Gjdpfx Aborpl S Uo Djit The reel is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms, reel, hose reel Reference: ZEL-42181

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. Gsdpjymcmfjfx Ab Doit CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: used, Slitter 650x3 Stainless Steel, made by GUIDA Main characteristics: - Type of products: Stainless Steel (INOX) - Thickness: 0.20 - 3.00 mm - Entry coil width: 20 - 650 mm - Coil maximum weight: 5000 kg - Coil outer diameter: maximum 1560 mm - Coil inner diameter: 400/500/600 mm - Minimum extractable diameter: 510 mm Type of products: Stainless Steel (INOX) Thickness: 0.20 - 3.00 mm Entry coil width: 20 - 650 mm Gsdpfx Absymciye Djit Coil maximum weight: 5000 kg Coil outer diameter: Max. 1560 mm Coil inner diameter: 400/500/600 mm Minimum extractable diameter: 510 mm

Condition: used, Year of construction: 2006, Babyslitter 600x4 made LDM Manufacturer: LDM Model: 600x4 Year: 2006 For material Type: Stainless Steel / Carbon Stell / Carbon steel SAE1006, S235-S550, C45-C75, IF (NOW) Yield strength: 600 N/mm2 Scope of supply: Gijdeymcgxspfx Ab Det - Loading Ramp capacity 6 ton; - Loading carriage; - Uncoiler - Electronic centring system - Straightening machine; 3 rolls Ø 65 mm - Shear - Centring device with vertical rollers - Idle rollers and feeder - Circular shear - Scrap collecting device - Scrap rewinder - Deburring press - Loop inlet table - Loop outlet table; Spacers shaft diameter: Ø 80 mm - Felt Press - Lubrication system - Conveyor line feeder - Deflector roll - Telescopic table - Recoiler - Unloading carriage - 4-arm turnstile - Complete tooling Useful Width (min.-max.): 150 - 600 mm Decoiler Coil Weight: 6000 kgs Coil inner Diameter: 508 mm Coil Ext Diam: 1600 mm Recoiler Coil Weight: 6000 kgs Coil outer Diameter: 1600 mm Slitting shaft diameter: 180 mm Cutting blades diameter: 320 mm Line Speed Introduction: 5-10 m/min Line speed Operation Max: 150-250 m/min Number of cuts: up to 20 cuts Yield strength: 600 N/mm2

Condition: refurbished (used), SLITTING LINE INMASA 1100x3 Revamped in 2019 Scope of supply 1. Loading carriage for coil up to 15000 Kg 2. Cantilever Uncoiler with hold down roll 3. Threading group with supporting roll + Pinch roll 4. Crop shear 5. Intermediate table 6. Pinch-roll 7. Circular shear (turning unit with 2 pairs of arms, one in-line + one off line for preparation) 8. Exit roll table 9. Scrap recoiler 10. Accumulator pit + Tiltable cover 11. Tensioning device with Strip guiding arm 12. Recoiler 13. Unloading carriage 14. 2-arms turnstile 15. Switch cabinets & control panels (New in 2019) 16. Pneumatics & Hydraulics 17. Existing tooling SCOPE OF THE WORKS CARRIED OUT DURING THE REVAMPING OF THE LINE MADE BY EUROMAQUINA IN 2019 · Complete disassembly for overhaul and cleaning of each line component · Final paint touch up. · Electrical disassembly of each component. · Checking of the elements for defects. · Overhaul of motors. · Conductivity, brush cleaning in DC motors, etc. were checked. Not repairable motors were replaced. · Mechanical assembly of the line components. · Assembly of components to be replaced due to defective parts. · Revision of hydraulic cylinders with change of seals. Cleaning and painting. · Overhaul hydraulic motors. Cleaning and painting. · Overhaul hydraulic power units. Cleaning and painting. · Overhaul of pneumatic cylinders and electro-valves. · Replacement of defective hydraulic piping and hoses. · Replacement of pneumatic piping. · Change all wiring on board machine. · Replace defective boxes on board the machine or paint them. Coil weight: 15.000 kg Coil outer diameter: 1650 mm Coil inner diameter: 508 / 610 mm Strip thickness: 0.4 – 3 mm Coil width: 150 - 1100 (1060) mm Ultimate tensile strength: 600 N/mm2 Yield strength: 500 N/mm2 Gisdpfx Aeymbplsb Det Exit coil weight: 15.000 kg Exit coil diameter: 700 – 1550 mm Exit coil inner diameter: 508 mm Exit coil width: 31 – 1100 mm Max. cutting speed: 150 m/min Disc blades diameter (inner-outer): 160 – 300 mm

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L Gedjpyg Tbepfx Ab Dsit  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Gjdpfx Aoyf Dqiob Doit Gripper function: tilt forwards-backwards 0–90° Gripper function: rotate left-right +90 / –90° MACHINE DETAILS Battery voltage: 12 V Battery capacity: 70 Ah EQUIPMENT Cable drum gripper SG 600 Du-Hy/So Note: The machine is sold without charging plug, battery, and charger.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, load capacity: 100 kg, High-lift truck with cable reel gripper SG 600 Du-Hy/So! TECHNICAL DETAILS Payload: 100 kg Diameter: 150 mm to 850 mm Tilting forward-backward: 0° to 90° Rotating left-right: +90° to -90° MACHINE DETAILS Battery: 12 V, 70 Ah EQUIPMENT Giodpjyf A Nqsfx Ab Djt Gripper function Note: The truck is sold without a charger.

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Gsdpfx Asyf Aiwob Doit Max. coil width: 600 mm Mandrel diameter: 80 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V