Used Rack And Pinion for sale (9,448)

Condition: good (used), clear span: 1,350 mm, Technical data for the pallet racking traverse: Racking system: Stow Type: Pal Rack NS Hjdpfx Asqt Dhfeahsp The scope of delivery includes: 01x pallet rack beam, used Material color: orange Box profile: 80 x 50 mm Beam type: PNBH 0488 Bracket: 4 HK (hooks) Weight / unit: approx. 5.38 kg Clear width: approx. 1,350 mm 02x Locking pins, used Version: completely galvanized To secure the side rails against unintentional lifting out Note: - The cross beams can also be used in drive-in racking systems. - It is also possible to use the cross beams as bracing. General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is associated with additional costs, which will be charged separately depending on the place of delivery or scope of delivery.

Condition: good (used), shelf length: 20,600 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 20,600 mm Number of bays per row of shelves: 05 pcs. 4,000 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes: 06x pallet rack uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, foot plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack traverse, used Material color: Ral 2004 orange Box profile: 100 x 50 mm Beam type: PNB0480 Agraffe: 4 HK (hooks) Clear width: 4,000 mm Max. load per pair of beams 700 kg, with evenly distributed load 40x locking pin, used Version: completely galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Hedpfsrz Nvfjx Aahsp Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 3 mm Weight: approx. 0.38 kg | pc. Currently available in stock: approx. 2,610 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Hjdpfxstda Sde Aahop This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking crossbar: Hsdohlhfgopfx Aahep Racking system: Stow Type: Pal Rack OP Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: blue Box profile: 110 x 50 mm Clear width: 1,300 mm Maximum load per crossbar pair: 2,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Low and Duff Chocolate kettle Hjdpfomqm Dzsx Aahep 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Hjdjtxinaspfx Aahsp

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Hodpjlhqdmefx Aahjp Available immediately

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 Hedpfx Aaequuv Ishop with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: excellent (used), Year of construction: 2015, The Heuft Reflexx – high speed empty bottle and label inspector. Model Reflexx HBBRTIXX Spectrum TX controller Capacity to 50.000 bph. YOM 2015 EXCELLENT CONDITION It’s more than just a quick check. The HEUFT system diligently inspecting empty glass bottles for any defects before they move on to be filled is comprehensive quality assurance that brings immense value to the entire bottling process. Here’s why these HEUFT inspection solutions are so critical: 1. Full Coverage, Zero Blind Spots: The system doesn’t just glance at the bottle; it performs an all-surface, all-angle inspection of the base, sidewalls, finish, and threads. This level of detail is vital for spotting tiny defects the human eye can easily miss. 2. Advanced Detection Technologies: Utilizing a powerful combination of high-resolution cameras, smart AI image processing, and in some models, patented pulsed X-ray technology. This includes: Hodpfx Aasytrdtehop - Glass Defects: Cracks, chips, inclusions, and finish damage. - Foreign Objects: Everything from foil and cigarette butts to insects, residual liquid (like caustic lye or oil), and, most dangerously, glass splinters hidden in the bottle base. 3. Low False Reject Rate: Thanks to intelligent image analysis (like HEUFT reflexx A.I.), they can distinguish between a critical defect and a harmless cosmetic blemish, meaning you don’t waste good, perfectly usable bottles. HEUFT SPECTRUM TX Controlling centrally: one platform for all requirements. Precise, network-compatible and cross-system: the HEUFT SPECTRUM TX forms the basis for different technologies, modules and functions. The devices of the generation of the same name can be exactly adapted to individual requirements on site and retrofitted at any time due to this universal platform.

Condition: used, Bitzer compressor rack chiller -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h Hsdpfoy Sk Ntsx Aahsp -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm -Stock quantity: 1

Condition: good (used), Year of construction: 2005, Type 1B/1K-M Max. length of workpiece. 5000 mm Max. workpiece width. 300 mm Hsdju Hi Tropfx Aahop Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2005y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2007, Type 1B/1K-M Max. length of workpiece. 5000 mm Max. workpiece width. 300 mm Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Hedpfxeitvdno Aahjp Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Hjdswhcfxopfx Aahjp Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Hsdpjq Nx Alefx Aahsp Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Year of construction: 2019, condition: used, functionality: fully functional, Used decorative galvanizing line NICKEL CHROME Hodpfx Aaoy Hcmtshep The line consists of 19 tanks with dimensions 3m x 1.2m x 1.4m (4.5 tons) 1 dryer with 2 motors 2 transformers 12V–15V, 1200A 1 transformer 12V–15V, 4000A 1 oil transformer 2 pumps with a voltage of 400V (three-phase) and a power of 1.5 kW If required, we can also offer a water treatment (purification) line, and the line can also be used as a plant for DEMI water production.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. Hedpfxoy D Ilis Aahep High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Hedpfxsu Dahne Aahop Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) Hedpfxeh U Nvke Aahop DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 25,410 kg, overall weight: 36,910 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2007, Equipment: ABS, tail-lift, For sale: Professional livestock semi-trailer by Gray Adams, model GAdd3T/4, year 2007. The trailer has seen little use, is fully operational, has undergone a recent inspection, and is ready for immediate operation. =====•••••===== NOTICE! Option to purchase the entire set together with the 3-axle tractor MAN TGX 28.480 (6x2 drive), which the trailer was paired with. 2014 MAN model with extremely low mileage—only 268,000 km! Well-maintained, continuously serviced, ready for operation, Euro 5 standard. The tractor is equipped with a spacious, comfortable cab, leather seats, two beds, coffee maker, and electric sunroof. Price for tractor unit only: €12,900 net Discounted price for combined set: €45,900 net We offer delivery of the entire set to any address in the EU or to a port under preferential conditions! =====••••===== Gray Adams specialist trailers are robust and reliable designs, engineered for transporting cattle, horses, and other livestock. A new trailer of this type cost over 900,000 DKK (~600,000 PLN net ≈ €130,000), reflecting the high build quality and durability of the Gray Adams brand. =====•••••=====•••• Technical data – trailer: Brand/Model: Gray Adams GAdd3T/4 Year of manufacture: 2007 – in service since 2008 Transport dimensions: 13.6 m (L) × 2.55 m (W) × 4.0 m (H) Hodpfx Aexc Hzqjahep Unladen weight: 11,500 kg Payload: 25,410 kg Gross vehicle weight (GVW): 37,000 kg Axles: 3 axles (including 1 steering axle) Suspension: air suspension Landing legs: JOST Tires: 385/65 R22.5 (approx. 60% tread) Brakes: disc brakes – components (S-cams) replaced in June 2021 Certification: CE Design and purpose: - Two-deck trailer – ideal for transporting larger quantities of animals - Full hydraulic system – safe and convenient operation - Remote-controlled hydraulic aluminum lift - Integrated water system – ensures optimal conditions for transported animals - Durable build and materials ensuring longevity Technical condition: - Trailer rarely used, maintained in very good condition - Regularly serviced – all maintenance performed promptly - Fresh inspection – fully roadworthy and ready for use =====••••===== Additional equipment: - Remote-controlled hydraulic lift - Integrated watering system - Complete documentation and CE certificates - High-quality components (JOST, pneumatic system, disc brakes) - Metallic paintwork =====••••===== Why choose this offer? - Top brand: Gray Adams – world leader in livestock trailer manufacturing - Durable and reliable construction – designed for intensive use - Recent inspection – guaranteed operational status - Very competitive pricing compared to a new unit (over 900,000 DKK!) - Ideal solution for livestock breeders, farmers, and transport companies

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Hedpfotqmwgex Aahop Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: new, functionality: fully functional, fuel type: hydrogen, color: other, Year of construction: 2026, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Hjdpfsxpxqqox Aahsp Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 370 kW (503.06 HP), fuel type: hybrid, color: other, Equipment: ABS, cabin, hydraulics, The CONSTMACH JCV-1 mobile crushing plant is a three-axle mobile system specifically designed for professional crushing and screening plants seeking high capacity and superior performance. The CV-1 provides maximum efficiency in crushing high-hardness rock types such as granite, basalt, dolomite, and similar materials. It is also an ideal solution for producing high volumes of fine material and achieving excellent cubic-shaped aggregate. The plant is based on sophisticated engineering, long-lasting components, and the durability that comes with CONSTMACH quality. The JCV-1 system consists of a combination of a mobile jaw crusher, a cone crusher, and a vertical shaft impact crusher (VSI) unit. This structure allows material to be obtained in five different fractions simultaneously. The PLC-controlled automation system is equipped with SIEMENS and SCHNEIDER brand electronic components, and the plant can be managed from a single tablet. Its modular and portable design makes it compliant with international road transport standards. The hydraulic foot system allows for easy installation and commissioning. Optional diesel generator options can also meet energy requirements on site. JCV-1 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 610 x 380 mm Main Configuration: Jaw Crusher + Cone Crusher + VSI + Vibrating Screen Total Motor Power: 370 kW Electric Generator Requirement: 750 kVA Plant Weight: 90 tons (total) Dimensions: 1. Chassis – 10 (L) x 3.1 (W) x 4.4 (H) m 2. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m 3. Chassis – 17 (L) x 3.8 (W) x 4.4 (H) m Chassis Type: Hydraulic folding legs, three wheeled chassis Why Choose the CV-1 Mobile Jaw Crusher? Hsdpfoxqgwhjx Aahsp CONSTMACH CV-1 is an excellent choice for users seeking maximum efficiency and flexibility in mobile crushing plants. Its easy transportability, short setup time, and advanced automation technology save time and labor. While offering reliable performance for years with its high-quality components, its user-friendly design minimizes maintenance and operating costs. If you are looking for high-quality material production, durability, and engineering excellence, experience the CONSTMACH difference in the field with the CV-1 Mobile Jaw Crusher. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: hybrid, color: other, Equipment: cabin, The fixed sand washing and screening plant is an advanced system designed for the high-efficiency separation and cleaning of natural sand and gravel. Developed with CONSTMACH engineering, these plants can be customized according to different production capacities, final product sizes, and washing requirements. Thanks to the plant's modular design, it can be easily integrated into any project area with different layout plans. It offers flawless washing performance with options such as a high-vibration feed bunker, a washing nozzle vibrating screen, and a helical or bucket washer. The hydrocyclone system ensures maximum efficiency in separating fine material. Furthermore, thanks to the PLC-controlled automation system, all processes are managed from a single point, minimizing the margin of error. CONSTMACH stationary sand washing and screening plants are equipped with SIEMENS and SCHNEIDER brand electronic components, offering long-term use and high durability. With these features, they are an ideal solution for companies that want to maintain high quality standards in aggregate production. Stationary Washing and Screening Plant Technical Specifications Production Capacity: 100 – 250 t/h Maximum Feed Size: 200 mm Feed Height: 4.5 meters Main Configuration: Feed Bunker + Washing Nozzle Vibrating Screen + Helical Washer / Bucket Washer / Dewatering Screen and Hydrocyclone + Conveyor Belts Total Motor Power: Varies according to production capacity Electric Generator Requirement: Varies according to production capacity Weight: Varies according to production capacity Why Should You Choose CONSTMACH Stationary Washing and Screening Plants? Hodpoxqai Rsfx Aahsp CONSTMACH combines its long-standing engineering experience in washing and screening technologies with high quality standards. All systems provide long-term use with low maintenance costs thanks to their durable steel construction and energy-efficient motors. In addition, with project-based customization options, it offers full compliance with each customer's production goals. Thanks to its superior service network and fast spare parts supply, CONSTMACH plants preserve the value of your investment in the long term. What Does Constmach Do? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Hodpfotqmvrex Aahop

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Hedpfx Aownriasahsp Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen