Used Quick Hobler for sale (5,939)

Condition: excellent (used), Quick change chuck Make Hässner Type GF 2-Mk 2Z (28526) Lhedpfjt Uaxmsx Affjr 2 inserts MK 2 4 inserts MK 3

Condition: ready for operation (used), Year of construction: 2002, MAZAK SUPER QUICK TURN 100MSY CNC Lathe - High-Performance Turning with Y-axis (Price Negotiable!) Manufactured in 2002 in Japan by YAMAZAKI MAZAK CORP., this MAZAK SUPER QUICK TURN 100MSY CNC lathe is built for precision machining of workpieces with a maximum diameter of 280 mm. This machine comes with a comprehensive range of features, enhancing its versatility and productivity. All machining parameters are programmed through the advanced CNC control, which allows for the creation of complex programs in just a few steps. The MAZAK SQT 100 MSY CNC turning center weighs 4720 kg. Technical Specifications: ● Maximum turning diameter: 280 mm ● Maximum bar diameter: 51 mm ● Maximum turning length: 309 mm ● Maximum main spindle speed: 6000 rpm ● Dimensions (L x W x H): 2100 x 1600 x 1800 mm ● Machine weight: 4720 kg Equipment: ● CNC Control: MAZATROL 640T Lhsdpfx Afowpxwmofor ● Sub-spindle ● 12-position turret ● Chip conveyor ● Foot control Contact us today to discuss pricing and make an offer!

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post Lhedpfxsxdicaj Affjr -Quick-change tool holder: quick-change turning tool holder -Recording dimensions: see photos -Clamping height: 50 mm -Support length: 230 mm -Quantity: 1x holder available -Dimensions: 230/85/H150 mm -Weight: 6.7 kg

Condition: as good as new (ex-display), Year of construction: 2024, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Station 2 punching with trump tool and/or cutting in thirty degrees Lhodpfxofhw N Is Affor max 4mm St45 max 3mm stainless steel Throat: max. 100mm

Condition: used, Jaw width: 80 mm Lhsdjv D Hv Ispfx Affsr Opening width: 75 mm

Condition: new, weight max. in kg 2500 kg fork length 1150 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 4 vorne, 2hinten tire equipment PU/Pu fork arm (length x width x thickness) 1150 x 155 x 50 mm weight of the machine ca. 0,068 t dimensions 1,5 x 0,54 x 1,21 m Ljdpfxshqigle Affjhr SPECIAL PRICE!!! - Hydraulics with quick lift function up to approx. 200 kg - controlled lowering of heavy loads - Low-maintenance steel hydraulic unit - Rounded fork tips for more safety when entering the pallet - Hard chrome-plated piston rod and overload valve - Swivel and load rollers with ball bearings, for easy running even under load

Condition: excellent (used), Quick-release threaded chucks with safety coupling Lhodpfx Aswlp Ihjffer Manufactured by Holex Straight shaft diameter 31 mm Set of 6 Diameters: 8-9-10-14-16-18 mm (28632) Stock number

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2019, next inspection (TÜV): 12/2025, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller Certified for beverages Lhsdpsxfm Sbofx Affer Lifting axle Disc brake Edscha sliding roof Lift-lowering device Spare wheel holder Pallet box German registration Portal doors SAF axles, chassis no.: D443686

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder Lhodpfx Afoxday Ajfsr -Manufacturer: DRGM Hässner, quick-change chuck holders 10 pieces -Type: Morse -Receiving sleeves: 3x MK4 / 3x MK3 / 2x MK2 / 2x MK1 -Shipping/Price: complete -Transport dimensions: 320/150/H220 mm -Weight: 14.7 kg

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 2,300 kg, lifting height: 220 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Technical condition: very good Front tires type: solid rubber Lsdsu D N N Iepfx Affohr Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Description: If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We are happy to enquire about leasing & financing as well as delivery at favorable conditions for you. Linde devices can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of listing. Subject to prior sale, changes and errors. Tandem load rollers, rubber steering wheels, Quick Lift (quick lift function), professional design for heavy use, can be greased, sturdy construction

Condition: like new (used), NOFIX quick-change tool holder for retrofitting to milling machines, boring machines, etc. For ISO / SK 40 spindle mounts Lhedjv Saaijpfx Affor Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Lhsdpfx Aewc Ri Ioffor Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: used, 10 Bilz quick change recordings WES 16 x 22 3 B. 3 units available WES 3B 20 x 16 1 x "available Lsdpfxodn Swrj Affshr WES 3B 22 x 18 2 x. "available WES 3B 25 x 20 3 x "available WES 3 B 28 x 22 1 x "available

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, The Henry Quick cordless vacuum cleaner from Numatic is a display item in mint condition. The battery life is approx. 60 minutes and carpets can be cleaned effectively with the electric turbo nozzle. The stand / column can be purchased for an additional charge. Ledpjuiyg Eefx Affshr Technical data: Running time: approx. 60 minutes Motor: 300 watts Filter bag capacity: 1 liter Weight: 3.2 kg

Condition: good (used), Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, attachment holder -Quick-change chuck: MK5 shank with 10 arbor sleeves -Receiving sleeves: 2x MK5 / 3x MK4 / 4x MK3 / 1x MK2 Lhsdpfx Asxdalxjffer -Shipping/Price: complete -Transport dimensions: 340/270/H150 mm -Weight: 29.8 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 2,300 kg, lifting height: 220 mm, fork length: 1,150 mm, drive type: Handbetrieb, Hand pallet truck Lsdju D N Nzspfx Affehr Technical condition: very good Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Description: If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We are happy to enquire about leasing & financing as well as delivery at favorable conditions for you. Linde devices can also be traded in - even without purchasing a device from us. The operating hours shown were read off at the time of listing. Subject to prior sale, changes and errors. Single load rollers, rubber steering wheels, Quick Lift (quick lift function), professional design for heavy use, can be greased, sturdy construction

Condition: excellent (used), power: 122 kW (165.87 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 8,582 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 25.000 kg Dimensions (LxBxH): 889 x 298 x 308 cm Engine type: Caterpillar C4.4 Mast: articulated arm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Japan Lhjdpfx Afjw U Df Ejfer Condition CE type: CE OQ70/55 Oilquick quick coupler, 600 mm track shoes, bucket with teeth, transport width 300 cm

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Ledpfewc Rk Eex Affshr Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: good (used), Quick-change tool holder size D with base Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Lhodpfx Afsw Ec Eyefsr

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Lhsdpfx Aswx Nl Heffor Specification: Maximum Swing 675 mm / 26.57 in Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm Lhsdpjw Upx Rofx Affsr -Weight: 3.5 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 7,921 h, functionality: fully functional, machine/vehicle number: 637, travel distance X-axis: 754 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, TECHNICAL DETAILS Number of axes: 3 X travel: 754 mm Y travel: 500 mm Z travel: 500 mm Max. spindle speed: 10,000 rpm Table size length: 1,000 mm Table size width: 500 mm Control type: Heidenhain iTNC 530 Control: CNC Interface: ISO40 MACHINE DETAILS Lhjdpfx Aswyv Tmjffer Dimensions & Weight Weight: 4,000 kg Dimensions: 2,600 mm x 2,350 mm x 2,560 mm Transport packages: 3 units EQUIPMENT Documentation available CE marking available

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Lsdpfx Afjwc Afhjfohr Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Year of construction: 2011, 2011 Mazak Quick Turn Nexus 250-II M in superb condition with Mazak Matrix Nexus Control, 12-position turret, live tooling , chip conveyor, high-pressure coolant system, automatic tool presetter, and part catcher. ----- Machine Specification: CONTROL Mazak Matrix Nexus Control 15” Color LCD Touchscreen Mazatrol conversational programming (also supports G-code) Networking capabilities: Ethernet, USB, FTP, DNC CAPACITY Chuck size (main spindle): 10” Maximum swing: 610 mm Maximum machining diameter: 350 mm Maximum turning length (1000 mm bed): 1,025 mm Lhjdpevt Ehzefx Affsr Maximum turning length (500 mm bed): 515 mm Max bar work capacity (main spindle, dependent on chuck system): 76 mm MAIN SPINDLE Rotating speed maximum: 4,000 min⁻¹ Motor output (30-minute rating): 26.0 kW TURRET Number of tools: 12 Mill spindle motor output (10-minute rating): 5.5 kW FEED AXES Travel (X axis): 190 mm (500 mm bed) / 225 mm (1000 mm bed) Travel (Z axis): 515 mm (500 mm bed) / 1,025 mm (1000 mm bed) / 1,535 mm (1500 mm bed) Rapid traverse (X axis): 30 m/min Rapid traverse (Z axis): 30 m/min ACCESSORIES Chip conveyor (optional) High-pressure coolant system (optional) Automatic tool presetter (optional) Part catcher (optional) MACHINE SIZE Machine dimensions (L x W x H): 2,475 mm x 1,780 mm (500 mm bed) / 4,382 mm x 2,095 mm (1500 mm bed) Machine weight: Approx. 7,500 kg Total power consumption: Approx. 20 kVA Control: Mazak Matrix Nexus Control Spec: Spindle Bore 76 mm | Max Swing 610 mm | Travel mm X 190 Z 616 Accessories: Tailstock, Tool setter, Parts catcher, Swarf conveyor & Tooling Package

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post -Mounting dimensions: 112 mm Lhjdpjd Ebpljfx Affsr -Number: 5x steel holders available -Price: per piece -Dimensions: 160/55/H170 mm -Weight: 3.7 kg/piece