Quenching press for sale

Your location was not identified (Edit)
Enter your address
or
Move
5

Quenching Press GLEASON 537

Monheim, GermanyGermany dealership location
18058 km
2009
used
max. wheel diameter 711 mm dayligth 203 mm slide stroke 152-508 mm Control SIEMENS boring diameter 152 mm max. workpiece diameter 508 mm workpiece height max. 102 mm 200gkv press capacity 100 kN Dimensions (LxWxH) 1240x2990x2540 mm weight 5443 kg Gear Press - distance upper die holder to top of bottom holder: 254-558 mm - press capacity external and internal ring: 10886 kg each more
5

Quenching Press OERLIKON SP 5 / 2

Staufenberg, GermanyGermany dealership location
17967 km
1977
used
max. wheel diameter:500 mm dayligth:500 mm slide stroke:500 mm E2srfca7g total power requirement:17,5 kW weight of the machine ca.:4500 t dimensions of the machine ca.:3x3x2 m more
5
Specifications: Table length: 3250 mm Clearance between stands: 2550 mm Stand extension: 275 mm Electric motor: 10 kW 0tgicsae Electric motor speed: 1450 / min Pressure: 125 tons Stroke: 80 mm Ram adjustment: 125 mm Air pressure: 4-6 atm Air consumption: 7 m3 / h Machine weight: 12 900 kg more
15
Presto, type HPK 50 BSK, Nr. 4, year of construction 2009, drive power 22 kW Technical specifications: Manufacturer Presto Type HPK 50 BSK Year of construction 2009 Press power 50 t Specific press capacity 65 N/cm² Drive power 22 kW Power input 80 A Hours of operation 12363 h Nobdv Channel cross section 1100 x 700 mm Feed channel dimensions 1050 x 1250 mm Filling volume 0,96 m³ Throughput capacity on idle speed 157 m³/h Cycle time 22 sec. Average throughput rates: Density of 3... more
6
Double column - hydraulic press SMG type HBP 200-2000 / 2000 Fabr. No. 7.4117 built 1986 - 2000 conversion Force 200 ton. Stand width front 2050 mm Stand forward on the side of 2030 mm Table size 2800 x 2000 mm Plunger area 2000 x 2000 mm Piston stroke 700 mm Height of 1850 mm Table height above floor 750 mm Hwrjmaygc RAM retraction force 33 ton. Rapid forward speed 500 mm / s Press speed 72/36 mm / s Rear hub speed 420 mm / s Safety distance 230 mm Motor power of main engine 75 ... more
3
pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm 9wvoanorl speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm height over floor:6,05 m height beneath floor:1,5 m power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDx... more
4

Hydraulic C-Frame press OMERA OPI 100 SC

Strassberg, GermanyGermany dealership location
18039 km
1991
used
Pressure: 100 ton Throat: 420 mm Stroke: 600 mm Daylight: 900 mm Table surface area : 980 x 750 mm Ram surface area: 980 x 750 Nbpuz Table height over floor: 985 mm Approach speed: 480 mm / sec Working speed: 21 - 60 mm / sec Return speed: 470 mm / sec Levelling roll-Ø : 50 ton Additional adjustment range each rail: 250 Max. pressure: 600 x 650 Required power: 22 kW Dimensions L x W x H: 980 x 2.050 x 3.800 mm Weight of machine approx.: 10,5 ton more
1

Fine Blanking Press FEINTOOL GKP 160

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
18055 km
1975
used
pressure 50 t plate thickness mm no of strokes 72 Hub/min ----- PRESS DESIGN - drive system: knuckle-joint SLIDE - total force (nominal) 50 to - stroke 50 mm - stroke rate (max.) 72 /min TOOL DIMENSIONS - lower table (left-right) 430 mm - shut height max. 230 mm Jvcpey more
7

Eccentric press Stanko K 2232

Brno, Czech RepublicCzech Republic
17479 km
1973
excellent (used)
Pressing force: 160 tons Year of production: 1973 Year of production: 1973 Maximum speed: 37 rpm Lift height: 39 mm Working surface: 800x600 mm Working height between table and ram: 360 - 480 mm The front and rear tape feeder can be placed on the press. Machine weight: 13,500 kg Dpjdntn The machine is in good technical condition and fully functional. more
12
3ojawg8 Control system: SAFAN Pressing force: 170 T Bending length: 4100 mm 4 axis CNC bombirung Motor power: 11 kW Stroke upper beam: 300 mm Working pressure: 345 Bar Machine weight: 15700 kg more


quenching ...
daily

New machines via email!

Stay updated!
2
Sanchez - and press tool with hydraulic WEBER type E45 / 59600.0 Built in 1988 / 1986 Hydraulic power pack type E45 / 59600.0 Working pressure of 630 bar Max Flow rate approx. 2 l / min Fuel tank capacity approx. 10 litres Spreitzgerät - pliers WEBER type SP30 / 059 198.0 RADIUS arm length = 340 mm Spreading way of to 810 mm Spreading force in the working area max. 132 kN Clamping force kN 99 -Double hose with plug connection Nominal 0.9 kW Power supply 220 volt, 50 Hz Hydraulic un... more
2

Double Column Press - mechanical SCHULER SA 125

Eislingen, GermanyGermany dealership location
17981 km
1977
used
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm 88u7n0usu power requirement:46,5 kW weight:29,5 t Dimensions (WxDxH): m list price: in running function in our warehouse: German Safety: permitted for automatic mode: i... more
9
Pressure 200 t Bend length 3100 mm Stand passage 2800 mm Stroke 400 mm H8dlaadki Extension 300 mm Control CYBELEC DNC 7000 Distance Table / Pestle 965 mm Table width 170 mm Rear stop - adjustable 1200 mm Working height 1080 mm Room requirement approx. 5000x3000x3500 mm Machine weight approx. 18500 kg more
7

fineblanking press Schmid HSR 160

Schwäbisch Gmünd , GermanyGermany
17972 km
good (used)
Fine cutting press Schmid HSR 160 Gx3qdle more
2
Eccentric press VEB BLEMA GOTHA PEE II 160 built in 1988 in Germany. Technical parameters : - press pressure: 160 T - table size: 710 x 1000 mm - slider table surface: 850 x 630 mm - slider adjustment: 100 mm - number of strokes per minute: 50 min-1 - slider stroke range: 32-140 mm - total connected power: 15.5 kW - machine dimensions (height x width x depth): 3400 x 1300 x 2800 mm - weight: 12000 kg Bfgrnflkrw - central lubrication system - an additional shaft measuring 1200 x 76... more
4

Eccentric Press WEINGARTEN AR 125

Brno, Czech RepublicCzech Republic
17477 km
1965
good (used)
Bfaq7kmphz Maximum force (pressing): 125 t Length of the bottom working table: 800 mm Width of the bottom working table: 630 mm Maximum number of strokes per minute (automatic work): 66 1/min Ram stroke: 20-120 mm Adjusting the ram: 100 mm more
6
Almimy Direct 18 Bfgqyjzaxq Screw compressor Engine power: 18kW Final pressure: 10bar Delivery volume: 2.94m3/min more
4
pressure:315 t distance between columns:1660 mm stroke:400 mm Distance table/ram, stroke up:600 mm Table surface area:1600 x 1000 mm table height over floor:960 mm Betu7clxvk Die cushion pressure in table:80 t Die cushion stroke in table:200 mm Die cushion area in table:950 x 650 mm Side window:720 mm Ram surface:1600 x 1000 mm Oil volume:1400 l Power capacity:57,0 kW Weight:30,0 t Dimensions (WxDxH):2,7 x 2,9 x 4,5 m die cushion in table:hydraulic more
7
Pressure 300 t Bend length 3100 mm Control CYBELEC Mumtcc Accessories/Equipment: - 2 front support arms more
1

Compressors HYDROVANE 66CM Rotary Vane Air Compressor

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
ready for operation (used)
Nmymr more
2
Hydraulic press DIEFFENBACHER DT II 100/40 manufactured in 1982. Technical data of the 100 ton deep drawing press: - table dimensions: 1000 x 800 mm - slider dimensions: 1000 x 800 mm - main cylinder: 100 tons - main cylinder stroke: 600 mm - stroke of the deep drawing unit: 250 mm Gi9vkbs - pressure of the deep drawing unit: 40 tons - maximum building height: 900 mm - working pressure: 265 bar - cylinder: O200 / 220 mm - distance between columns: 1100 mm - power: 42 kW - machine... more
1
Maximum force (pressing): 1600 kN Maximum number of strokes per minute (automatic work): 50 1/min Bfgsxpsjoe Power demand: 11 kW Ram stroke: 25-160 mm Adjusting the ram: 100 mm Machine weight: 12190 kg more
6
Compressed-air tanks BWB Manuf.. No. 144247 built in 2008 Boiler capacity 90 litres Working pressure 11 bar -zinc plated -Pressure gauge -Pressure relief valve -3 piece valves Tank diameter 350 mm Total height 1200 mm Weight 37 kg Ngstz very good condition more
3
Pressure:63 t throat:400 mm stroke:16 - 90 mm no. of strokes:60 /min Bfdyaxv3ny distance table/ram, max. stroke up, adjustment up:350 mm table surface area:1000 x 750 mm hole in the table:260 x 140 mm table height over floor:710 mm ram surface:600 x 220 mm ram adjustment:50 mm power requirement: kW weight:4,3 t dimensions (WxDxH):1,1 x 2,6 x 2,4 m list price: mechanical PARTLY OVERHAULING:mit neuer Exzenterwelle German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumat... more
3

Eccentric C-Frame press EDELHOFF DEPRRW 200

Strassberg, GermanyGermany dealership location
18039 km
1983
used
Capacity: 200 ton Throat: 300 mm Ram stroke: 20 - 140 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 360 mm Table surface area : 1.500 x 600 mm Ram surface area: 1.300 x 560 mm Number of strokes: 30 - 120 [...] Bbpdlwpdvb Vertikale Verstellbarkeit der oberen Platte: 790 mm Required power: 18,5 kW Dimensions L x W x H: 2.250 x 2.250 x 3.500 mm Weight of machine approx.: 20 ton more
5

Compressors HYDROVANE 68E 60 cfm Rotary screw Compressor

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
ready for operation (used)
Serial No. 5hv699601/8809 Input 415/3/50 11 kW CFM 60 PSI 100 Length 4' Width 2' 6" Height 4' 8" Nett weight actual. 380 Kgs / 0.37 Tons Be0tphpjie more
4
Eccentric press IWK PKZZRR 250/2050 built in 1970 in Germany. Characteristic data: - dimensions of the working table: 2000 x 1000 mm - table height from the ground: 700 mm - slider dimensions: 1850 x 1000 mm - stroke: 300mm - slider stroke adjustment: 200 mm - clearance between columns: 2050 mm - number of strokes per minute: 14/35 Vsrpzq - power: 24 kW - machine dimensions: 3100 x 2000 x 6500 mm - press weight: approx. 33 tons - technical documentation, electrical and hydraulic d... more
3

Pressbrake Donewell H 110-2500

Brno, Czech RepublicCzech Republic
17477 km
1984
good (used)
Control system: DNC 600 Maximum force (pressing): 110 t 0nqfeerb Maximum bending lenght: 2000 mm Machine weight: 7000 kg more
6
Bookbinding press for gluing books MURO The machine is in perfect condition. Large format of gluing, fast work. Bfgo9vztzs It is an original product, the highest quality. Production Muro, Germany. more
5

Double Column Press - mechanical SCHULER SA 250

Eislingen, GermanyGermany dealership location
17981 km
1978
used
Pressure:250 t stroke:30 mm no. of strokes:60 - 500 /min Distance between columns:1500 mm distance table/ram, max. stroke up, adjustment up:390 mm table surface area:1580 x 1100 mm hole in the table:1270 x 300 mm table height over floor:1470 mm side window:600 mm ram surface:1500 x 900 mm ram adjustment:100 mm material width:500 mm material thickness:0,5 - 1,5 mm coil weight:6,5 t coil internal diameter:420 - 560 mm coil external diameter:1500 mm no. of straightening rolls: straightening roll d... more
2

hydraulic press LAUFFER OPS 60 A

Mögglingen, GermanyGermany
17957 km
1971
ready for operation (used)
Max. pressing force 60 to 0j9gwqjg Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm more
3

Compressors ABAC Formula 55 317 cfm Rotary Screw Compressor. Manufactured 2011

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
2011
ready for operation (used)
Serial No. CNZ 201928 Input 400 / 3/ 50hz 55 kW Belt drive yes Compressor unit rotary screw CFM 317 (9 m3/min) PSI 116 (8 bar ) Length 1650 mm Width 1200 mm Height 1800 mm Stepp8 Nett weight actual. 1,260 Kgs. / 1.24 Tons more
4
Revolver press AMADA PEGA 357 made in 1995 in Japan. Gda7zq8 Technical parameters : - counter: 36244 h - CNC control system: AMADAN-04 PC - pressure: 80 tons - bending length: 2500 mm - axis range (x, Y): 1250 x 2500 mm - type of machine table: roller table - opening height: 470 mm - finger retraction depth: 420 mm - controlled axes: X 1 X 2, Y 1 Y 2, R 1 R 2, Z1 Z2 - positioning speed (X axis): 50 m / min - positioning speed (Y axis): 50 m / min - simultaneous axis speed: 70 m /... more
8
- 5 lane capsule filling and sealing machine - All-Fill multi auger filler with modifications for Coffee as well as tea - max speed 10000 capsules per hour Safua07k -nitrogen flushing capability -conveyor run more
4

- USED - 6-AXIS SYNCHRONISED CNC PRESS BRAKE LVD PPEB 135/30 turbo

Matelica (MC), ItalyItaly dealership location
17814 km
2006
ready for operation (used)
AXIS: X1 - X2 - Y1 - Y2 - R - Z1 BENDING LENGTH: 3050 mm TONNAGE: 135 ton THROAT DEPTH: 400 mm Bfaqfy9szk DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 600 mm APPROACH SPEED: 180 mm/sec RETURN SPEED: 200 mm/sec WORKING SPEED: 22 mm/sec MOTOR POWER: 22 Kw CONTROL UNIT: CADMAN-CNC WEIGHT: 10000 Kg ACCESSORIES: WILA TABLE NOTE: N.2 FRONT SUPPORT BRACKETS; EASY FORM SYSTEM PRICE: On demand more
4
pressure:40 t throat:280 mm stroke:8 - 90 mm Stroke rate:130 / min Distance table/ram, max. stroke up, adjustment up:385 mm Table surface area:630 x 480 mm Hole in the table:170 mm Table height above floor:800 mm Passage to the back:350 mm Iwfhfon Ram surface:460 x 300 mm Ram adjustment:56 mm Power capacity:4,0 kW Weight:4,5 t Dimensions (WxDxH):1,1 x 1,6 x 2,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical two han... more
1
Pressing force 250 to Table 1.120x785 mm Delivery time approx. 3 weeks, intermediate sale reserved Pressing force: 250 to Table: 1,120 x 785 mm Clutch: electro-pneumatic clutch-brake combination Triggering: 2-hand Stroke: 30 - 140 mm Extension: 400 mm Installation height: 360 mm Impact completion: 110 mm maximum stroke number: 45 rpm. usable stroke number: 25 rpm. Pestle: 800 x 475 mm Clamping opening in the pestle: 65 H7/ 100/155 mm Diarrhoea hole: 320 mm H7 Clamping plate: 115 mm Engine: 22.0 ... more
1

Compressors ALUP SCK 45 275 Cfm Screw Type Compressor and Dryer

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
2004
ready for operation (used)
Serial No. 218471/F0405277 Capacity 275 cfm Input 415/3/50 45 kW Hours 6349 Compressor unit Screw type CFM 275 C0ag8kya Features Hankison dryer Length compressor 1.4 m dryer 1.25 m Width 0.9 m 0.6 m Height 1.65 m 1.25 m Nett weight actual. 1130 Kgs / 1.11 Tons more
8
The eccentric press WMW PEE 250 was built in Germany by the VEB Blema Goth Erfurt machine combination. Technical parameters : Press force: 250 tons (2500 kN) Slider surface: 900x670 mm Table surface: 1250x800 mm The size of the stroke of the slider: 40-160 mm Adjustment of the slider: 110 mm Projection: 460 mm Maximum opening in bottom return position and screwed connector: 400mm Total maximum opening: 660 mm Minimal opening in the lower return position and unscrewed connector: 290 m... more
5

Filter House Nestro 7/7-30 mit Brikettierpresse

Hochheim am Main, GermanyGermany dealership location
18019 km
2005
used
Used filter House Briquetting press Built in 2005 State: normal Filter type: 7/7-30 filter House Filter area: 105 m² Height: approx. 7,000 mm Bekxxjxgun Floor space: 1.953 x 1.953 mm Intakes: 300 mm = D & D = 250 mm Expansion storage: 8 m 3 (complete) Return air: 600 x 600 mm (including summer/winter switching) Fans: 2 pieces in the vacuum Air volume: 10,300 m ³/h (5,150 m ³/h per fan) Pressure differential: approx. 3,200 PA Power: 7.5 kW (per fan) Bri... more
8

- USED - 8-AXIS SYNCHRONISED CNC PRESS BRAKE    LVD PPEB 220/40

Matelica (MC), ItalyItaly dealership location
17814 km
2008
ready for operation (used)
AXIS: X1 - X2 - Y1 - Y2 - R1 - R2 - Z1 - Z2 BENDING LENGTH: 4000 mm TONNAGE: 220 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 3150 mm OPEN HEIGHT: 685 mm UPPER BEAM TRAVEL: 450 mm Bfaqe3mb7h X-AXIS TRAVEL: 600 mm R-AXIS TRAVEL: 600 mm APPROACH SPEED: 150 mm/sec RETURN SPEED: 200 mm/sec WORKING SPEED: 21 mm/sec MOTOR POWER: 37 Kw CONTROL UNIT: CADMAN TOUCH WEIGHT: 20000 Kg ACCESSORIES: CHILLER; PNEUMATIC TOOL LOCKING; WILA TABLE NOTE: N.2 FRONT SUPPORT BRACKETS; EASY FORM SYSTEM PRICE: On... more
2
pressure:80 t throat:300 mm stroke:7 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:450 mm table surface area:720 x 600 mm hole in the table: mm table height over floor:850 mm ram surface:400 x 275 mm ram adjustment:60 mm power requirement:5,5 kW weight:6,5 t dimensions (WxDxH):1,2 x 2,0 x 2,9 m German Safety: permitted for manual loading:CE-sign light guard:Sick infinitely variable drive: clutch:hydraulic Bfdydnqpcb overload protection in ram:hydraulic ... more
5

Four columns press BRUNNHUBER HSP 50 AZ 5x5

Strassberg, GermanyGermany dealership location
18039 km
1973
used
Capacity: 50 ton Stroke: 750 mm Daylight: 1.050 mm Table surface area : 500 x 500 mm Ram surface area: 500 x 500 mm Approach speed: 600 mm / sec Working speed: 34 - 85 mm / sec Return speed: 600 mm / sec Bbpdmaajjc Cushion capacity in table: 20 ton Oil volume: 700 l Height over floor approx.: 4.000 mm Weight of machine approx.: 8,5 ton more
1

Sundry Presses 5 Ton Pneumatic Toggle Press

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
ready for operation (used)
Cz7hsspw Capacity 5 ton Table size 13" x 9" / 330mm x 228mm Ram stroke 3. 1/5" / 78mm Throat depth 6.1/2" / 155mm Stroke length 3.1/2" / 78mm Control pneumatic Nett weight actual. 290 Kgs. more
3

Press Brake Trumpf V85X

Strassberg, GermanyGermany dealership location
18039 km
2000
used
Tonnage approx.: 85 ton Ezagzgr Bending length approx.: 2050 mm Stroke: 215 mm Distance between the columns: 1.750 mm Working hours machine: 50000 h Control: DELEM more
6
Machine Built: 1979 Condition: factory-checked Cold press (Machine prepared for connection to a hot water system) Pressing area size 3000 x 1300 mm with rack compensation with 4 pistons, piston diameter 85 mm with safety rip-off line Bemrxmsfhb Availability: short-term Location: Röllbach more
4

- USED - 8-AXIS SYNCHRONISED CNC PRESS BRAKE WITH ROBOTISED CELL SCHIAVI NMP 220/40

Matelica (MC), ItalyItaly dealership location
17814 km
2000
ready for operation (used)
AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 - Z3 BENDING LENGTH: 4000 mm TONNAGE: 220 ton CONTROL UNIT: TASK 84 MIND 3 WEIGHT: 23000 Kg NOTE: ROBOT ANTIL Mod. APR 5- HP/100 PRICE: On demand Bfaqfponfj more
5
pressure:160 t stroke:30 - 100 mm no. of strokes:30 - 180 Hub/min distance between columns:2340 mm Width between oil collecting pans:2000 mm distance table/ram, max. stroke up, adjustment up:600 mm Table area:2280 x 1200 mm hole in the table:1600 x 300 mm table height over floor:1020 mm side window:800/700 mm ram surface:2000 x 1000 mm ram adjustment:100 mm power requirement:60,0 kW weight:34,0 t Dimensions (WxDxH): m overload protection in ram:hydraulic WITHOUT feeder:can be offered optionally... more
6
Pressure total: 315 ton Stroke: 350 mm Nbpvd Daylight: 520 mm Approach speed: 300 mm / sec Working speed: 15 mm / sec Return speed: 300 mm / sec Side opening in the columns L ? R: 2.100 mm Table surface area : 2.000 x 1.200 mm Ram surface area: 2.000 x 1.200 mm Table height over floor: 950 mm Required power: 55 kW Dimensions L x W x H: 4.400 x 2.950 x 4.800 mm Weight of machine approx.: 30 ton more
1

Flypresses SWEENEY & BLOCKSIDGE No 4 Flypress

Leicestershire, United KingdomUnited Kingdom dealership location
18353 km
ready for operation (used)
Throat depth 5" Daylight 8" Nmylt Fitted with SWING ARM Equipment MOUNTED ON STAND Length 600mm Width 450mm Height 1900mm Nett weight actual. 290 Kgs. more


quenching ...
daily

New machines via email!

Stay updated!

to

to

Edit search
QUENCHING PRESS
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.