Used Pulleys for sale (405)

Condition: used, mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 01/2007, number of seats: 42, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1029 * PICK-UP PRICE * no TÜV (technical inspection), no new batteries, ... * Volvo * 8700 LE * AIR CONDITIONING Lajdpefg Nrgsfx Abzog * 250 kW - EURO 5 - Engine overhaul in 2016 (approx. 468,994 km) for over 27,300,--/net * Injection pump, etc. Fuel lines repaired at VOLVO in 12/2018! * Transmission overhauled at approx. 416,163 km!!! * Engine control unit replaced by VOLVO at approx. 410,331 km. * ZF automatic transmission * Retarder * Auxiliary heater * mechanical wheelchair ramp * complete repair history available – partial excerpt: * Brakes, NOx sensor replaced, rear air springs, engine maintenance, air conditioning maintenance, air dryer replaced, door cylinder door 2 replaced, regular oil changes for all oils, idler pulley replaced, crankshaft seal replaced, modulator rear axle replaced, fuel transfer pump replaced, * All information without guarantee * We reserve the right of prior sale. * We refer to our general terms and conditions. * WE ALSO HAVE A VOLVO SPARE PARTS WAREHOUSE * If required, you can contact us –

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: with rubber coating, diameter 236 mm Lodpfelug R Sjx Abzoag -Transport width: 750 mm -Shaft: Mountings Ø50 x 100/450 mm, dimensions see photo technical drawing -Quantity: 1x transport roller available -Dimensions: Ø 236 x 1300 mm -Weight: 53 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: with rubber coating, diameter 335 mm -Transport width: 945 mm -Shaft: Mounting Ø50/60 mm, dimensions see photo technical drawing -Quantity: 1x transport roller available -Total dimensions: Ø 335 x 1445 mm -Weight: 118 kg/piece Ledpfjlug Sljx Abzeag

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 315 mm -Transport width: 750 mm -Shaft: Recording dimensions see photo technical drawing -Quantity: 1x transport roller available -Total dimensions: Ø 315 x 940 mm Lsdolug Stepfx Abzsag -Weight: 81 kg/piece

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder Lodpfoyhduysx Abzsag - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, mileage: 354,774 km, power: 235 kW (319.51 HP), first registration: 03/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * Our internal number: 1077 * PICK-UP PRICE / Final price -> as is, where is. * MAN A 20 * Retarder * Automatic transmission * AIR CONDITIONING * SEATS also have 3-point seatbelts facing forward * CUSTOMER SERVICE performed in 06/2025: * e.g., oil change, fuel filter, pre-filter replaced, * oil filter, air dryer cartridge, idler pulleys / tensioner pulleys / * V-belt, FRONT AXLE completely overhauled, SHOCK ABSORBERS new, greased, .... * Matrix with control unit GORBA Lajdpoygp Hfefx Abzeg * Screen cabling incl. bracket * Folding ramp * Convector heater * 45 seats * 4 x folding seats at the KIWA parking space * 31 standing places * Raising/lowering * Paint: white * etc. * TAKE-AWAY PRICE * All information without guarantee * We reserve the right to sell the vehicle prior to sale * We expressly refer to our terms and conditions

Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. Ljdpowr Nlyofx Abzeag The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock Ledpfxsy Tptms Abzoag

Condition: used, Year of construction: 2025, New demonstration machine! List price: €4,938 net. The upper part is made of heavy-duty cast iron and features a built-in three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; motor circuit breaker and main switch according to VDE; dimensions of the sanding belt backing: 850 x 150 mm; steel table with height adjustment via spring pressure; belt dimensions: 150 x 2280 mm; the sanding belt backing is coated with a graphite sliding layer; the machine is supplied with a set of sanding belts; additionally included in the scope of delivery is an angle and miter fence. The machine is dust-tested (GS) according to Holz-BG-Stuttgart when connected to a central dust extraction system with an air velocity of at least 20 m/s. Standard equipment: - swiveling 90-180° - motorized belt oscillation - small support table on the idler pulley - pneumatic belt tension. Technical data: Motor power: 2.2 kW, sanding belt dimensions: 150 x 2280 mm, sanding belt speed: 22 m/s, table size: 750 x 350 mm, space requirement: 1000 x 800 mm, weight: from 180 kg, dust extraction port diameter: 100. Ljdpfx Absx Hwpvozjag Storage location: Rieth.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Lasdpfxjzwfxwo Abzsg Operators control station including speed control and start stop controls Working height 800mm

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel Lodpfxey Aklvj Abzjag -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available Laedjlzmxkopfx Abzeg -Dimensions: Ø 320 x 795 mm -Weight: 68 kg

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: Ljdeu U Rayopfx Abzeag 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Lajdpfxjzdiq Ss Abzjg Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates.

Year of construction: 2020, condition: ready for operation (used), This 5-axis TGT V2 Maxima was manufactured in 2020 and is in mint condition. It features an ELBARON grinding mist extraction system and includes collets for diameters up to 20 mm. Extras include robot pallets, spare spindle, and sanding wheel packs. Consider the opportunity to buy this TGT V2 Maxima. Contact us for more information. Additional equipment • ELBARON grinding mist extraction system / Robot pallets / Collets for all common diameters up to 20 mm / Spare spindle / Sanding wheel packs and associated sanding wheels (Approx. 25 pieces) Machine Benefits Technical Machine Benefits Lodox D Hi Rjpfx Abzeag • Operating time: 42000 minutes • Machine in mint condition / original spare spindle available, eliminating waiting times for spindle maintenance / full description and installation manual included Extra Information Spindle bearing: Front/rear: 7010 CTYN DU L P4 (NACHI)/ Lubricating grease: Kluberisoflex Super LDS 18 or NBU 25 (2.75 cc per bearing)/ Tightening torque: 58 Nm (front/rear)/ Concentricity: ≤ 0.002 mm/ Motor: LENZE 7.5 kW (10 hp), 4-pole/ Speed: 0-4500 rpm (frequency converter)/ Belt: PJ-12-1143L (GATES/FENNER)/ 2 Feed drive unit - X- and Z-axis/ Stroke: X-axis: 300 mm/ Z-axis: 680 mm/ Ball screw: Type: Fixed - Supported/ Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm tightening torque)/ Ball screw spindle: BIF 3210A-5 (THK, Ø32 mm, pitch 10 mm)/ Motor: BECKHOFF AM8053-0G20 (11.4 Nm)/ Clutch: SFC 050 DA2-24B-20B (MIKI PULLEY)/ 3 Feed drive unit - Y-axis Stroke: 300 mm/ Ball screw: Bearing: 25TAB06DBFLP4 (NACHI, 62 Nm)/ Ball nut specification: BIF 3210-5 (THK)/ Motor: BECKHOFF AM8061-0GB1 (12.8 Nm)/ Coupling: SFC 060 DA2-20B-32B (MIKI PULLEY)/ / Rotatable table - axis A/ Bearing: 7014 CTYN DUL P4 (NACHI)/ Tightening torque: 255 Nm (front), 62 Nm (rear)/ Radial runout: ≤ 0.002 mm/ Grease: Kluberisoflex Super LDS 18 (3.6 cc per bearing)/ 5th Rotary Table Assembly - C Axis/ Bearing: YRT 100 (GOLDBULL)/ Assembly torque: 14 Nm (3-stage: 40% → 70% → 100%)/ Motor: ORION_230/140 (NIMBLE/UCAM), 238 Nm/ Encoder: RENISHAW/ main coolant system/ Flow rate: 85 L/min/ Tank volume: 400 liters/ Pump: RKM206 (Rajamane, 1.5 kW, 6-stage)/ Filtration: Paper filter Para mol N 334/150 (0.01 mm)/ lubrication layout/ Oil pump: ELU-2700 (Cenlub, 3 liters, 415V AC)/ Metering Cartridge: 320410-3 (LUBE)/ steady rest (manual)/ Vertical stroke: 3 mm/ Diameter range: Ø3-Ø22 mm/ Carriage travel: 120 mm

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW Laedpfxetqfv Is Abzjg - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: good (used), mileage: 189,910 km, power: 315 kW (428.28 HP), first registration: 03/2013, fuel type: diesel, fuel: diesel, color: grey, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Weights Unladen weight: 24,180 kg Payload: 7,820 kg gross vehicle weight (GVW): 32,000 kg Functionality Mast: Telescopic (4 sections) Mast length: 35.5 m Lifting capacity: 2,650 kg Superstructure make: MKG HMK T A2-A2 CE marking: Yes Condition Technical condition: Good Visual condition: Good Lasdpfx Abeyiui Dszeg EURO 5 L PACKAGE 430 HP DRIVE 8X4 BB WHEELBASE 510 CM LEAF SPRING SUSPENSION AXOR CAB WITH AIR CONDITIONING, NAVIGATION, CAMERA SYSTEM MANUAL TRANSMISSION MANY TOOLBOXES MKG HMK 350 TA2-A2 ASSEMBLY CRANE/ROOFER'S CRANE + JIB 4X HYDRAULIC EXTENSION + 3X MANUAL OIL COOLER FOR CRANE HYDRAULICS LARGE HYDRAULIC WINCH 2500 KG !!! 4 X OUTRIGGERS REMOTE CONTROL + UPPER OPERATION WORKING HEIGHT 35.5 METERS ALL HOOKS AND PULLEYS PRESENT FOLLOW US ON INSTAGRAM: GEURTSTRUCKS

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 211 mm -Transport width: 745 mm -Shaft: Mounting Ø30 x 125/115 mm -Quantity: 1x transport roller available -Total dimensions: Ø 211 x 985 mm Lajdpjlug Sdefx Abzsg -Weight: 47 kg/piece

Condition: good (used), V-belt pulley, pulley -Diameter: 570 mm -Total width: 237 mm -Belts: 9 Ledpfx Absct H T Njzjag -V-belt width: 22 mm -Hole: Ø 90 mm -Pulley: balanced -Weight: 127 kg -other pulleys in stock

Year of construction: 1993, condition: ready for operation (used), controller manufacturer: SIEMENS, Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details. Laodpfx Absznazbozjg - Cutting Capacity (Rectangular): 800 x 800 mm- Cutting Capacity (Round Diameter): 800 mm- Front Minimum Cut: 105 mm- Rear Minimum Cut: 50 mm- Band Pulley Diameter: 900 mm- Blade Dimensions: 67 x 1.6 mm- Blade Length Range: 9,680 - 9,800 mm- Saw Blade Speed: 20 - 90 m/min- Saw Blade Motor Power: 7.4 kW- Saw Arm Movement Motor Power: 7.1 kW- Automatic Saw Arm Lowering Speed: 0 - 3000 mm/min- Hydraulic Pump Reservoir Capacity: 115 L- Hydraulic Pump Delivery Rate: 58 L/min- Hydraulic Pump Motor Power: 9.2 kW- Total Installed Power: 26 kW- Power Supply Voltage: 380 V- Frequency: 50 Hz- Machine Colors: RAL 6011 / RAL 2004- Control System: Siemens Simatic Panel / UniOP Panel- Included Equipment / Scope of Delivery: Hydraulic aggregate unit, standalone electrical control cabinet, control panel, material feed roller conveyor table

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley Laodpfxov Uvfte Abzsg All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: good (used), V-belt pulley, pulley with taper bushing mount, taper tensioning bushing, taper lock tensioning bushing -Diameter: 570 mm -Overall width: 314 mm -Belts: 12 -V-belt width: 22 mm -Taper bushing mount: Ø 95 mm (can be replaced) -Pulley: balanced -Quantity: 1x pulley available Price: per piece -Weight: 169 kg -other pulleys in stock Lasdjct H T Espfx Abzeg

Condition: used, Second-hand gang saw motor (electric motor) AEG type AM 280 SX 4 for driving frame saws in sawmill applications. The electric motor is suitable for professional use in sawmills and supports the operation of frame saw systems for woodworking. Technical data: - Power: 75 kW - Pulley diameter: 330 mm Ljdozxzcuopfx Abzsag - Pulley width: 220 mm

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 322 mm Lajdpfx Aelug Szjbzjg -Transport width: 750 mm -Shaft: Mounting Ø40 x 95 mm -Quantity: 1x transport roller available -Total dimensions: Ø 322 x 940 mm -Weight: 62 kg/piece

Condition: used, mileage: 279,430 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder Lsdpjy U A S Sjfx Abzsag * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions