Used Profile Milling Tools for sale (42,157)

Year of construction: 1980, condition: ready for operation (used), Max. rotational speed: 2500/min, feed rate: 5-500mm/min. Guodpjfdzzyjfx Ankob

Condition: ready for operation (used), Max. rotational speed: 2000/min, with instruction manual. Gjdpfslbmtgex Anksub

Condition: ready for operation (used), Various wood milling tools are available for a Homag DEP. Spindle diameter: 35mm/50mm, tools: cutter set for longitudinal machining/replacement knives/milling tools. Documentation available. On-site inspection is possible. Gedpfx Anoufqfqjkjub

Condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible. Guedpevriptefx Ankjb

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Godpfxox S Rcms Anksub

Condition: ready for operation (used), Travel X/Y/Z: 290mm/150mm/330mm, vertical head stroke: 100mm, tool holder: SK40, speed: 2000rpm, feed rate: 500mm/min, rapid traverse: 1200mm/min, table dimensions X/Y: 600mm/195mm, max. table load: 150kg. Machine dimensions X/Y/Z: approx. 1250mm/1200mm/1400mm, weight: approx. 1800kg. On-site inspection is possible. Guodpfxjx Hz Rkj Ankob

Year of construction: 1986, condition: ready for operation (used), Travel X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, max. table load: 500kg, spindle mount: SK40, speed: 3150rpm, quill stroke: 100mm, feed: 3m/min, rapid traverse: 6m/min, machine dimensions X/Y/Z: approx. 3550mm/3150mm/2100mm, weight: approx. 3600kg. On-site inspection is possible. Gjdpfx Ajwkihxsnkeub

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Gedpfjw Edptsx Ankoub

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Gujdpfx Asxwcu Aenkjb

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Gjdpfxjd N Smhs Anksub +++++

Condition: good (used), Universal milling machine STANKO 676P Longitudinal table travel X: 400 mm Vertical table adjustment Y: 380 mm Upper arm transverse adjustment Z: 250 mm Clamping surface of the vertical table clamping surface: 250 x 630 mm Spindle mount: MK 4 Quill stroke: 60 mm Swivel angle of the vertical head: +-90° Table size of the rigid angle table: 800 x 250 mm Distance between horizontal milling spindle and rigid angle table: 80 - 460 mm Distance between vertical milling spindle and rigid angle table: 0 - 380 mm Distance between vertical vertical spindle and column: 125 - 375 mm 16 spindle speeds horizontal: 50 - 1630 rpm. 16 spindle speeds vert.: 60 - 2040 rpm. Godpfxstrybgo Ankeub 16 longitudinal and vertical feeds: 13 - 395 mm/min. 16 headstock feeds: 13 - 395 mm/min. Rapid traverse all axes: 0.935 m/min. Drive power: 2.2 kW Weight approx.: 1.4 t used, in good condition

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 Godsx Tdy Ijpfx Anksub The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Delivery time approx. 12 weeks

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, Gsdoiqkc Ispfx Anksub travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank

Condition: excellent (used), WNT tool holder SK40 Ø8x80, HSC version with G2.5 balancing up to 25,000 rpm. Professional solution for HPC/HSC machining on CNC centers. Complete with a solid carbide end mill VHM (fine-pitch, multi-flute) – ready-to-use set. Very good condition, premium class equipment. Gedpfxow Rrv Ro Anksub

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Gusdpfsl Dvx Ejx Anksb Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 2000, machine/vehicle number: 5184, Danobat Danocenter NA-750 CNC Turning + Milling Center Gusdsxx Admepfx Ankjb max swing 700mm, X/Y 255/520mm, 12-Pos-Upper-Tool-Turret and 8-Pos-Lower-Tool-Turret with driven tooling, Measuring Head, Tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15to

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Guedpfeyghywex Ankob

Condition: good (used), Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters Slotted discs, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 190 mm -Height: 90 mm Guedpfx Ansg Uxgfokjb -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 9.9 kg

Condition: used, Tool holder, milling holder, milling tool, adapter, intermediate sleeve, presetting device -Milling holders: Adapter for tool presetting device 7 pieces Gedpspix Nkjfx Ankoub -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: good (used), Tool holder, tool mount, milling tool Gedpfx Anohc Uxdokeub -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm -Weight: 4.2 kg

Condition: good (used), Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete Godpfeb A I Hlox Ankoub -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

Condition: good (used), Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool -Outer milling cutter: Ø 207 mm -Height: 75 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 6.7 kg Gjdpfxsg Uxf Ne Ankjub

Condition: good (used), Slotted discs, window milling tools, indexable inserts for window construction tools, wood milling tools, wood milling cutters Slotted discs, milling tool for wooden windows, wood router bit, milling head, milling tool, wood router bit, profile router bit -Manufacturer: VIVALDI, window milling tool Gsdpfeg Uxgbex Ankjub -Outer milling cutter: Ø 172 mm -Height: 100 mm -Hole: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 8.2 kg

Condition: good (used), Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm Godpfsu S Tbbex Ankjub -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows Gsdjb A Np Nspfx Anksub -Dufix: Nr/Var 46616 -Socket: Ø 50 mm -Weight: 6.8 kg