Used Professional Extreme 750 for sale (9,372)

Condition: used, max. wheel diameter 0-200 mm Nwjdjtuxa Uopfx Ahvsd max. module 25 min. module 0,5

Condition: excellent (used), Ex University, used Anti-vibration table 750mm x 750mm Nwjdpfx Ajyt N Sbjhved

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is delivered powder-coated in RAL 7012 and RAL 7035. Use of special colours is possible but must be agreed in advance and may incur additional charges. Nwjdpoywpt Iefx Ahvod Welded table frame designed for professional use, mounted on a swiveling trolley, stands on 4 swivel castors, surface load capacity 150 kg. When not in use, the machine can be swiveled and locked into a space-saving position, reducing its depth to just 800 mm. The table surface consists of a 22 mm thick HPL/MDF board, covered in the pressing area with a slotted vacuum distributor plate made of MDF. Membrane frame opening is assisted by 2 gas struts mounted on the sides of the machine. The installed membrane is made of natural rubber, 2 mm thick, 780% elongation at break, and heat resistance up to 70°C. The membrane is fixed using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is ensured by a sealing profile in the membrane frame. Oil-lubricated vacuum pump with 40 m³/h suction capacity and two vacuum tanks with a total capacity of 200 liters. Press chamber evacuation and ventilation is controlled via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. You can also book initial setup and a brief instruction session by one of our technicians. If required, we will be happy to provide you with a separate quote for this service. Summary of key specifications: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation at break: 780%, excellent recovery properties, suitable for temperatures up to 70°C - Vacuum distributor plate made of MDF - Digital vacuum control VAK-CONTROL 1 with automatic shut-off - Vacuum pump: 40 m³/h, oil-lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with brakes - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Setup dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Setup dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: April/May 2026 Location: Flörsheim

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Nwedpfx Ahoxy Rx Ieved Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Nwsdpfxeylkvls Ahvsd Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° Nodpfxexy Rxhs Ahvjwd E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: excellent (used), Year of construction: 2015, Heidenhain TNC 620 V2 control system Travel X/Y/Z: 760/480/480 mm Speed: 12,000 rpm Tool magazine for 24 SK40 tools Table size: 900 x 410 mm Nsdpsv Rr Hxjfx Ahvjwd Chip conveyor Automation / Robot

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. Nwodpjyxp Rvofx Ahvjd - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm Nwedpfsyxp Nfsx Ahvsd - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm Nwsdpeyxkwwjfx Ahved - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: excellent (used), functionality: fully functional, spindle bore: 52 mm, Strojimport (Czech Tos) L & Z Lathe TIP TOP With 3-axis digital readout ACU RITE Compact, powerful and absolutely stable as well as precise machine Impeccably smooth operation at all speeds Turning capacity: 430 (in gap 650) x 750 mm Spindle bore 52 mm Drive 5.5 kW Spindle nose: short taper No. 6 3-jaw wedge-bar chuck Forkardt 200 mm Speeds 50 - 1800 rpm Multifix B with 4 holders, tailstock MK 4, quick-action drill chuck 3 - 16 mm, live center Röhm, Nsdoyxhlfjpfx Ahvewd machine feet, drum stop. Safety features: CE compliant, electrically monitored chuck guard, power-on protection, spindle brake, splash guard, emergency stop, occupational safety signs will be added upon request. Dimensions: L 1.8m W 0.86m H 1.4m Weight approx. 1300 kg Naturally, can be inspected under power Free loaded, D - 88433 Schemmerhofen

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm Nodpfxeyvz Izo Ahvswd opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg Price: On request - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 675002 - Drive system: CNC - Horizontal/vertical: Horizontal - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 - C-axis rotation [°]: 360 - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 Nwodpjxqw E Asfx Ahvjd - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Nwjdpfx Ahjyvq Nhjvod Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Nedpfx Ahoyvq Evovswd Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 x 750 Precision Lathe (2007) Nodpfx Aoyw Tkdohvswd Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2011 Availability: from April-May 2026 Condition: very good, used Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank cross-section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Main spindle internal taper: 5 mm Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse (longitudinal/cross): 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread pitches: 99 Quill diameter: 50 mm Quill stroke: 130 mm Quill internal taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: - Collet chuck system - Multifix quick-change tool post - Machine lamp - Coolant system - Machine feet - Original documentation

Condition: used, mileage: 232,803 km, power: 552 kW (750.51 HP), first registration: 04/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,830 mm, total width: 2,550 mm, loading space length: 6,300 mm, loading space width: 2,540 mm, loading space height: 1,200 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, power assisted steering, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Electric power steering - Remote central locking - Refrigerator - Leather interior - Alloy wheels - Lift axle - Air suspension - Tow jaw coupling - Engine brake - Hub reduction - PTO - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater Nwedpfsyw Npiex Ahvod - Toolbox = Notes = Volvo FH 16 750 8x4*4 Lift and steering axle. Full air suspension. Retarder. Dynamic steering. Trailer coupling. Fassi F710RA.2.26 XHE Dynamic JIB: L426 Scanreco radio remote control. 3.70 m - 16,000 kg 4.30 m - 13,900 kg 5.95 m - 9,850 kg 7.70 m - 7,400 kg 9.65 m - 5,770 kg 11.70 m - 4,630 kg 13.85 m - 3,850 kg 16.10 m - 3,280 kg 19.10 m - 1,660 kg 20.45 m - 1,500 kg 21.80 m - 1,365 kg 23.20 m - 1,250 kg 24.75 m - 1,150 kg 26.35 m - 980 kg Manual extension 29.85 m - 600 kg 31.70 m - 480 kg 33.50 m - 350 kg = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80% Front axle 2: Tire size: 315/70R22.5; Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80% Rear axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Weights Empty weight: 22,985 kg Payload: 14,015 kg Gross vehicle weight: 37,000 kg Functional Crane: Fassi Interior Upholstery: Leather Financial Information Price: On request Identification Type number: FH 16 750 8x4 / RETARDER / FASSI = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We also speak Russian. We strive to provide accurate information, however no rights can be derived from the published texts.

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Nwjdpfoyw I H Tsx Ahvod Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, area performance: 1,935 m²/h, overall weight: 160 kg, warranty duration: 12 months, water tank capacity: 40 l, TASKI SWINGO 750 BT DRIVE-MOTOR SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) 430mm cleaning head equipped with a new medium-hard disc brush for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger and wheel drive simplify daily operation. A suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Nodpsyw H N Hefx Ahvewd Suction nozzle working width (mm): 690 Theoretical performance (m²/h): 1935 Tank capacity (l): 40/40 Working speed (km/h) 3.0 - 4.5 Machine weight, ready to use (kg): ~160 Dimensions (LxWxH) (mm): 1160x690x1195 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 430mm PPL 0.5 disc brush Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 40-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: HAAS, table load: 1,360 kg, overall weight: 4,200 kg, spindle speed (max.): 7,500 rpm, number of axes: 4, This 4-axis MIKRON VCE 750 was manufactured in 1998. It features impressive travels of 762 mm in the X-axis, 510 mm in the Y-axis, and 560 mm in the Z-axis. The machine includes a tool magazine with 20 positions and a maximum table load capacity of 1,360 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON VCE 750 vertical machining centre we have for sale. Contact us for further details. • Tool magazine: 20 positions • Rapid traverse: 25 m/min Nwsdpfxsyu S Ubo Ahvjd • Feed rate: 16 m/min • Table size: 600 x 865 mm • Condition: Ready for operation Additional equipment • Chip conveyor Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2022, I sell the horizontal band saw Droste Schärftechnik Viki 750-80, year 2022. Max. working width 750mm. Saw band 80mm Njdpfx Ahoywrwvevewd Wheel diameter 710mm Main motor power 22kW. Full hydraulics. Band conveyor. PLC control display. Condition very good. Available immediately.

Condition: used, Just Normlicht Color-Control Professional ist ein Farbprüftisch für ein präzises Farbmanagement-System. Njdpjyuzf Ajfx Ahvewd Just Normlicht Color-Control Professional is a color testing table for a precise color management system. Farbprüftisch / Ink Proof Table Just Normlicht Color-Control Professional  Tischabmessungen / Table Sizes 940 x 680mm 5 Schubladen L/B/H 90 x 70 x 12cm / 5 drawers W/L/H 90 x 70 x 12cm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), For sale: as-new ELIET turf seeder/drill, type GZC 750. Operating hours: 50.0. Weight: 252 kg. 6.5 HP, hydrostatic drive and steering grid rollers. Seed box capacity: 61 L. Adjustable seed rate, removable seed box, ergonomically adjustable handlebar, 75 cm working width, 2 grid rollers, suitable for slope use. Levelling harrow centrally located underneath the seed box. Levelling, seeding, and reconsolidating in a single operation. Price net. Nwjdpfxeywnn Ro Ahvjd

Condition: used, mileage: 847,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player Nwsdpoywlawefx Ahved - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2015, Lippert belt conveyor GF 19370-750-600 RA2275 Technical data: Conveyor length (NL): 19370 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Nsdperupuujfx Ahvewd Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics