Used Pre Shredders for sale (45,572)

Condition: used, Used Netzsch model PMD Pharma 50 stainless steel pre-mix disperser approximately 50 litre working capacity. Jacketed chamber with mechanical seal. Has welded conical bottom and bolted dished top heads. Unit has top entry stainless steel agitator driven by a 15kw 3/50 2900rpm motor. Includes hydraulic powerpack driven by a 1.1kw 3/50 1415rpm motor for agitator raise and lower. Has bottom entry stainless steel scraped surface agitator driven by a 1.35kw 3/50 142-1420rpm motor. Bdsdoxyxnwepfx Ab Tjk

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 450 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm Bdsdpfx Aewb Ha Tsb Tsk – weight: 450 kg

Condition: good (used), mileage: 561,385 km, power: 265 kW (360.30 HP), fuel type: diesel, color: red, axle configuration: 6x4, fuel: diesel, wheelbase: 4,200 mm, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel, loading space volume: 15 m³, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, differential lock, = Additional options and accessories = Bjdpoxyubtefx Ab Tsdk - Electric windows - Speed limiter - Air-suspended seats - Sleeper cab - Sun visor - Toolbox - PTO (Power Take-Off) = Remarks = MAN TGS 33.360, 6x4, vacuum and high-pressure truck, tipper tank, manual gearbox, steel suspension, Wittig pump RFW 200, high pressure pump Pratisolli K32, Belgian registration, good working condition = Further information = General information Year of manufacture: 2008 Transmission Gearbox: ZF, 16-speed, manual transmission Axle configuration Suspension: Leaf suspension Front axle: Steering; left tyre tread: 50%; right tyre tread: 50% Rear axle 1: Twin tires; differential lock; left inner tyre tread: 30%; left outer tyre tread: 30%; right inner tyre tread: 30%; right outer tyre tread: 30%; reduction: external planetary axles Rear axle 2: Twin tires; differential lock; left inner tyre tread: 40%; left outer tyre tread: 40%; right inner tyre tread: 40%; right outer tyre tread: 40%; reduction: external planetary axles Functionality Bodywork brand: Wicom Condition Technical condition: good Visual condition: good Further information Please contact Gerrit Haverhoek for further information.

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Bjdpfx Aou Tq S Heb Tsdk Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: good (used), Year of construction: 2000, Maschinen Nr. 534 Built in 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Bdsdpfx Ajxyff Neb Tek Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Condition: ready for operation (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, number of blades: 5, overall weight: 21,000 kg, power: 279.49 kW (380.00 HP), fuel type: diesel, color: red, motor manufacturer: CAT, motor model: CAT C9.3, Field of application: Bdsdpfxsxfiybs Ab Tjk For use with aluminum, white goods, light sheet metal scrap, aluminum rims, various types of waste and wood Shafts with 7/7 discs with 5 knives per disc Robust hook lift frame Axle with drawbar (solid rubber wheels) Reinforced rubber conveyor belt Water spray system Radio remote control Optionally: Permanent overband magnet

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0509 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Bedpfxexixito Ab Tedk

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation Bjdpfx Ajxn Namob Todk We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Material of construction: stainless steel Type Of Heads: welded dished top and welded dished bottom Bdsdpfxext Ehde Ab Tjk Internal Pressure: 29 PSI Jacket Pressure: 58 PSI Internal Temperature: 273°F Type of stainless: stainless steel Legs/Lugs: Yes

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Bedev Am Emopfx Ab Tjdk

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Bodsmqty Uopfx Ab Tsdk For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. Bedpfxexv Dv Es Ab Tsdk It has process connection thread of Pg 13.5, and its connector is of “VP” type This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: new, Year of construction: 2025, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer Bodsulwg Njpfx Ab Tedk 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Bedpfswp Uhbjx Ab Tedk Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Model: DOH-SPK-D244-W26-E21-LIN-2017 Type: Cryogenic Freezer Spiral Serial number: 201703033177 Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Year of construction: 1997, condition: used, Double trough pre-pressing screw Trough approx. 2,800 x 660 mm Screw diameter approx. 370 mm 2-cylinder solids pump SP 2180-400 with distribution station and 55 kW hydraulic unit Bsdpfx Abstppmzo Tedk

Condition: good (used), table length 1,500 mm / width 760 mm, Bsdpfx Absimz D Uj Tsdk Motor 4.0kW (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 €

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Bodpfx Absmqty Ro Todk Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface Bedpfxsftb Ebo Ab Todk - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Condition: used, Year of construction: 2020, Pre-feeder 1600 width /2000m Bedpfx Aev Ni I Reb Tedk Bottom printing

Condition: good (used), Code: 0042 Bdodpfx Asv Ay Hksb Tjk Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Technical data Min/max panel height mm 10/60 Feed speed mt/min 3,8 Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: new, Hopper opening: 2.500 x 2.000 mm Rotors: 2 pcs. Bdodjbq St Hspfx Ab Tsk Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,800 kg, power: 22 kW (29.91 HP), Technical data: Power: 22 kW Blades: 29 pieces Dimensions: 1800 × 1840 × 1000 mm Weight: approx. 1,800 kg Bodpjxnznvjfx Ab Tsdk Condition: New and unused On pallet, immediately available for delivery or collection Location: 86554 Pöttmes

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm Bdjdpfxomqtzcj Ab Tok support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2016, condition: ready for operation (used), Various machines for processing, walking, steaming, and preforming uppers and lasts for the shoe manufacturing industry are available. 1) Moccasin upper steamer Elettrotecnica 232/S, year of manufacture: 2008, tank capacity: approx. 15l, heating time: approx. 8min, power consumption: 6kW, machine dimensions X/Y/Z: approx. 600mm/450mm/950mm, weight: approx. 70kg. 2) 2x aluminum last preforming machines Nova M-BO, year of manufacture: 2002, max. temperature: 200°C, machine dimensions X/Y/Z: approx. 950mm/700mm/1350mm, weight: approx. 250kg. 3) Upper walking machine Ring-Leibrock Wasch 3-2K, year of manufacture: 2016, stations: 2, max. temperature: 120°C, stroke rate: 25/min, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 420kg. 4) Upper preforming machine Irleh IR-13/P, year of manufacture: 2005, max. temperature: 160°C, machine dimensions X/Y/Z: approx. 1400mm/900mm/1600mm, weight: approx. 400kg. 5) 2x upper preforming machines RKK Kölsch H-BÜ, year of manufacture: 2007, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 900mm/700mm/1300mm, weight: approx. 210kg. An on-site inspection is possible. Bodpfx Ajxnp Rrob Tedk

Condition: new, ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU-Diesel motor, rotor flight circle Ø 575 mm, 2 x 12 cutting inserts on tool holder, show machine. Bsdpfebg Engox Ab Tedk