Used Power Supply Replacement Unit for sale (62,849)

Condition: used, Hydraulic Power Unit, Hydro Unit BOSCH REXROTH Type Solo FD 101 Hydraulic Power Unit Year of manufacture: approx. 1980 Operating pressure: max. 115 bar Flow rate: 12 litres/min. Tank capacity: approx. 80 litres (with central oil sight glass) Motor power: 3 kW Power supply: 400 Volt, 50 Hz - BOSCH REXROTH hydraulic pump, type Solo FD 101 - 1 piece 5/3 way directional control valve, 24 Volt Bsdpjxf Uzdefx Acyelp - 1 piece return filter - 1 piece pressure regulator - Tank dimensions L/W/H: 650 x 400 x 470 mm - Connection fittings for hydraulic pipes 12L Required space L x W x H: 700 x 430 x 1300 mm Net weight: 130 kg in good condition

Condition: used, mileage: 23,233 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock Bjdpfx Acsxitmgeyslp 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: used, This listing is for the Invitrogen PowerEase 500 Power Supply Blodpfx Acoxhfzmsyep The unit is in full working condition and is ready for immediate use The Invitrogen PowerEase 500 is a simple, sturdily constructed, leak-free, and user-friendly electrophoresis power supply designed for mini-gel electrophoresis of DNA, RNA, or proteins. Its compact benchtop design is ideal for laboratory settings focused on reliability and convenience. Summary The PowerEase 500 combines robust construction with microprocessor control and flexible programming, making it a reliable workhorse for gel electrophoresis. Its dual-output design, programmable memory, and simple user interface help streamline repetitive lab work while maintaining precision and safety.

Condition: not inspected (used), ADVANCED ENERGY Bedpfx Ajwncb Tscyjlp M/N: 3152327-002A S/N: 112919 F/R A For further data see type plate illustration, unit is untested.

Condition: new, Design with bag filter Technical data: extruction nozzle 200 mm Bjdpfovrv E Ijx Acyjlp engine power S1 3 kW, 400V nominal flow rate 2262 m³/h max. volume flow 3010 m³/h cut surface vacuum measured with 2 m hose 2174 Pa filter area 13,7 m² filter dedusting compressed air residual dust content H3 (

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic Bledsun N Auopfx Acysp moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Hydraulic power unit with HILMA hydraulic pump Hydraulic power pack, hydraulic unit Type: 5034-4302 Operating pressure: max. 500 bar Flow rate: 1.2 litres/min. Motor power: 0.75 kW Tank capacity: approx. 4.5 litres Power supply: 400 Volt, 50 Hz - HAWE piston pump, type R 1.5 - 1 piece HAWE 2/2-way valve, type WGR 2-1 (230 V DC) - Pressure regulator Required space (L x W x H): 280 x 260 x 480 mm Net weight: 25 kg Good condition Bsdpfxjxf Uyye Acyslp

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic power unit by REXROTH, consisting of: hydraulic tank 250 l, electric motor 15 kW, REXROTH internal gear pump, HYDAC pressure accumulator, SCHMÖLE heat exchanger, temperature monitoring, hydraulic filter, return filter. Bodpsxb Ebtsfx Acyolp

Condition: used, This listing is for the Isotech IPS 303DD Power Supply The unit is in full working condition and is ready for immediate use Description For sale is a used Isotech IPS 303DD DC Bench Power Supply, a reliable and accurate unit ideal for electronics testing, lab work, or educational environments. This model features precise voltage and current control, dual digital displays, and fine/coarse adjustment knobs for both voltage and current, offering versatility and ease of use in any bench setup. Key Features Output Voltage: 0 – 30 V DC Output Current: 0 – 3 A Dual LED Display: Simultaneous voltage and current readout Adjustable coarse and fine controls Constant Voltage (CV) / Constant Current (CC) operation Bjdpjxhfqhsfx Acyjlp Overload and short circuit protection 4mm safety binding posts for secure connections Internal fan cooling for thermal management Ideal For Electronics hobbyists and repair professionals Engineering and science students Workshops, makerspaces, and test labs

Condition: not inspected (used), Advanced Energy Industries M/N: 3155018-000D Bedpfxswnbvpe Acyslp S/N: 112480

Condition: new, Design with bag filters and integrated extinguishing device Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h max. volume flow 4900 m³/h cut surface vacuum measured Bedpfjvr I R Ajx Acyolp with 2 m hose 2740 Pa filter area 22,4 m² filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: used, Year of construction: 2016, For sale: AEG Protect 8.33 / 40 kVA industrial UPS system with two additional battery cabinets. This system is designed for reliable uninterruptible power supply in industrial environments. UPS Type: Protect 8.33 40-400-384-400 Bljdpfx Acsxd Axbeyop Power rating: 40 kVA Input: 3-phase, 45–66 Hz, 3x400 V, 66 A Output: 3-phase, 50 Hz, 3x400 V, 58 A Power factor: cos φ 0.8 Short-time withstand current: 10 kA (1s) Year: 2016

Condition: used, Hydraulic unit, Hydraulic Power Unit VICKERS Order No.: 62357390 Year of manufacture: approx. 1985 Operating pressure main pump: 60 bar Flow rate main pump: 16 liters/min. Operating pressure cooling circulation pump: 5 bar Flow rate cooling circulation pump: 5 liters/min. Tank capacity: 160 liters Motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 2 hydraulic pumps (1x main pump, 1x cooling circulation pump) - 1 BOSCH accumulator, 2 liters - Pressure relief valve - Hydraulic filter - Cleaning cover Required space L x W x H: 1000 x 620 x 1100 mm Own weight: approx. 150 kg In good condition Bledjxf Uyajpfx Acyep

Condition: new, Siemens 6RA4001-1AA01 Simodrive Power Supply < unused > in opened original packaging, 100% functional. Blsdoxagwaspfx Acyjp

Condition: used, This listing is for the Lascar PSU 130 CMD23 Benchtop Power Supply The unit is in full working condition and is ready for immediate use The Lascar PSU 130 is a compact, single-output benchtop power supply module. Bsdsxhffxepfx Acyelp It provides an adjustable DC output ranging from 1.5 V to 30 V, with a maximum current of 1 A—ideal for electronics labs or testing environments Specifications include: Wide input voltage range: ~100–240 VAC, 47–63 Hz Built-in over‑voltage, over‑current, and short‑circuit protection, plus excellent regulation with low output ripple Front panel includes a back‑lit digital display for voltage and current, a rotary adjustment knob, and 4 mm output terminals

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 71118 F/R B, Advanced Energy M/N: 3152326-000B S/N: 71118 F/R B Further data see type plate illustration, device is untested. Bledewnczajpfx Acyep

Condition: used, Hydraulic Power Unit, SPERRY VICKERS Hydraulic Power Pack Order No. 624186 Year of manufacture: approx. 1985 Operating pressure: 60 bar Flow rate: 6.5 liters/min Bedpfx Aoxf Ux Nscyjlp Tank capacity: approx. 30 liters Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - SPERRY VICKERS hydraulic pump, type GPA1-4-E - 2 solenoid operated directional valves SPERRY VICKERS, type DG4V-3-2C-UH-10-S300 Dimensions (L x W x H): 500 x 300 x 730 mm Net weight: approx. 70 kg Good condition

Condition: new, Siemens 6SC6100-0GC01 Simodrive Power Supply < unused > in opened original packaging, 100% functional Bjdpfxsxagz Es Acyslp

Condition: used, This listing is for One Agilent Keysight E36103ADC Power Supply (More Available) These unit is are all in full working condition and is ready for immediate use Overview: Keysight E36103 Model: E36103 DC Power Supply Bledpfoxhfckox Acysp Output: 20 V, 2 A, 40 W Successor to the older E36103A, which is now obsolete Key Features: High programming accuracy: Voltage: ±(0.05% + 7 mV) Current: ±(0.05% + 1 mA) Ripple & noise: Voltage: 0.8 mV rms, 15 mV peak-to-peak Current: ~1 mA rms Keysight Technologies Readback accuracy: Voltage: ±(0.05% + 5 mV) Current: ±(0.05% + 1 mA) Keysight Technologies Compact form factor: 2U ¼‑rack width, compact bench size with 3.7 kg weight Farnell UK Display & controls: High-contrast OLED screen visible from various angles Intuitive rotary knob and front-panel interface for quick digit‑by‑digit adjustments Connectivity: USB and LAN (LXI Core) Supports BenchVue for intuitive control, data logging, and automation Protection features: Overvoltage, overcurrent, and overtemperature safeguards included

Condition: used, Hydraulic Power Unit ORSTA Bledpfxjxcitps Acyep Year of manufacture: 1987 With 3 motors and various hydraulic circuits Tank capacity: 160 litres Pump power: 5.5 kW - 2 units of pressure accumulator, 160 bar, 25 litres each - 1 electric pressure switch - 7 units of 4/2-way hydraulic valve with solenoid coil - 5 units of 4/2-way hydraulic valve with solenoid coils - Oil cooling with water cooler and electric pump for internal water circuit Dimensions (L x W x H): 1300 x 750 x 1700 mm Weight: approx. 400 kg Offered without oil content

Condition: ready for operation (used), Siemens C79451-A3247-B71 SICOMP M26 Power Supply SN C1 039001, used, 100% functional Bodpfxexahmcj Acyolp

Condition: used, Hydraulic unit DAIKIN KOGIO (Japan) Type Y475109 / TF 71 Operating pressure: 70 bar Flow rate: 12 litres/min. Tank capacity: approx. 70 litres Motor power: 1.5 kW Electrical connection: 380 Volt, 50 Hz - 1 x pressure control valve - 1 x solenoid valve with 2 coils, 24 Volt - Pressure oil filter Required space: Length: 660 mm, Width: 500 mm, Height: 710 mm Bljdpfx Aoxcitiecysp Net weight: approx. 120 kg

Condition: ready for operation (used), Siemens C79451-A3247-B71 SICOMP M26 Power Supply SN C4 013882, used, 100% functional Bledpfsxahmijx Acyjp

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories Bljdpfxet Awm Ds Acysp The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar Bsdpov Ev Dqsfx Acyslp - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition