Used Pots for sale (490)

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) Hodpfjza U H Rex Ag Eofn - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Hfjdpfx Agezabnzo Eon Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Hfjdpfx Agjy Rlbno Ejn Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: used, Year of construction: 2008, workpiece weight (max.): 700 kg, INDUSTRIAL MARKEE 6-SPINDLE CENTRIFUGAL POLISHING MACHINE (2008) Industrial centrifugal polishing machine with 6 spindles, manufactured by INDUSTRIAL MARKEE SL (Spanish manufacturer), year 2008. From industrial company liquidation in Spain (insolvency proceedings) – not from a breakdown. ═════ SPECIFICATIONS ═════ - Manufacturer: INDUSTRIAL MARKEE SL (Spanish polishing equipment specialist) - Year of manufacture: 2008 - Type: Centrifugal polishing machine - Configuration: 6 spindles (heads) - Power supply: 380V three-phase, 50 Hz - Construction: Heavy-duty industrial steel frame - Multiple polishing heads working simultaneously - Designed for medium to high production runs ═════ APPLICATIONS ═════ Suitable for industrial polishing of: - Metal parts (steel, stainless steel, aluminum, brass, copper) - Cutlery and tableware production - Tap fittings, valves, and brass components - Plumbing fittings (taps, faucets, fittings) - Cookware (pots, pans, kitchenware) - Architectural metal components - Decorative metal objects - Hardware and tool finishing The 6-spindle configuration allows simultaneous processing of multiple parts, ideal for medium production volumes. Hsdpfx Agozcmgbj Eofn ═════ CONDITION ═════ - Used, from industrial closure (NOT from a breakdown) - Year 2008 (~17 years old) - structural condition good - Heavy-duty industrial construction designed for long-term use - Sold as-is, full inspection welcome before pickup - Polishing wheels/heads condition: variable, may need replacement (standard consumables, available worldwide) - Motor and bearings condition: to be verified during inspection - No original manual included ═════ ABOUT THE MANUFACTURER ═════ INDUSTRIAL MARKEE SL is a Spanish manufacturer specializing in polishing and finishing equipment. Spare parts and technical consultation are available through the local Spanish industry network. ═════ KEY ADVANTAGES ═════ ✓ Robust industrial construction ✓ Multi-spindle configuration (6 heads) for higher production output ✓ Heavy frame designed for stability during polishing ✓ Standard 380V industrial power supply ✓ Mechanically simple – easy to maintain and service ✓ Polishing consumables (wheels, compounds) widely available ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Barcelona, Spain - Weight: approximately 500-700 kg - Dimensions: medium-large industrial machine - Loading: forklift required - Pallet or pre-packed for transport possible - Inspection welcome by appointment - Payment: 100% bank transfer in advance - Documents: commercial invoice, sold as-is - International shipping possible – buyer arranges transport - Container loading possible (LCL or FCL) ═════ COMPARATIVE VALUE ═════ A new equivalent 6-spindle centrifugal polishing machine in 2026 costs €15,000-25,000. This used unit offers similar production capability at a fraction of the cost.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Hsdpjy Dg N Tsfx Ag Ejfn Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm MACHINE DETAILS Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit - Glue scraper unit - Brushing unit Hodpfx Aeyzm R Sog Ejfn External reference: MMG013

Condition: ready for operation (used), Year of construction: 2010, This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for sale.Contact us for more information. Additional equipment • Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters • End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm Machine Benefits Technical Machine Benefits Hodpfxezug Nxj Ag Ejfn • Dimensions of machine (lxwxh): 2100 × 825 × 1380 mm / weight (kg): approximately 520 kg • Voltage: 380v, 3-phase / power consumption: 8a / air pressure required: 6 bar

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application Hjdpfx Agozug Sgo Eofn • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: good (used), Year of construction: 2019, Edging thickness 0.4-3 mm / 5 mm Jointing unit Glue pot Pressure unit End trimming station Milling station Hjdpfx Ajy El Eieg Eofn Scraper blade Flat scraper blade Workpiece thickness 8-50 mm Workpiece width min. 75 mm Workpiece length min. 120 mm Total length approx. 2940 mm + magazine plate overhang Exact equipment upon request The data was taken from a technical data sheet; therefore, accuracy cannot be guaranteed.

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). !!! Price upon request !!! Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Hfsdpfszrfbhox Ag Esn Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Year of construction: 2010, condition: like new (used), Professional multinational tilting pan Frima VCC 211+ With a capacity of 100 liters, this tilting pan allows you to do anything you desire: cooking, pressure cooking, baking, frying, and more. Suitable for larger catering establishments, canteens, schools, kindergartens, butchers, etc. Features built-in high-power heaters, automatic water supply; simply enter the desired amount of water, and the pan will fill itself. Water drainage is also built into the pan. Rational VarioCooking Centre 211 – professional cooking for large quantities Hfedpfx Aszrk Tpog Eon The Rational VarioCooking Centre 211 is a top-of-the-line, multi-functional cooking appliance designed for professional kitchens and catering operations with a higher volume. With a 100-liter cooking pot and an intelligent control system, it replaces multiple conventional appliances and enables fast, precise, and uniform preparation of various dishes. Key advantages: Capacity: 100 liters – ideal for larger quantities of food. Efficiency: suitable for preparing 100 to 300 meals per day. 7 cooking modes: combines the functions of a stove, fryer, grill plate, tilting pan, and pot in one appliance. Temperature range: 30 °C to 250 °C for a wide range of food preparation. Power: 27 kW Dimensions: 1164 × 914 × 1100 mm (W × D × H) Advanced features

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 4547, functionality: fully functional, operating hours: 5,049 h, total height: 2,550 mm, total length: 5,900 mm, total width: 1,350 mm, overall weight: 3,000 kg, plate height: 45 mm, TECHNICAL DETAILS The machine consists of 8 processing units as follows: 1. Unit: Pre-milling unit – tools available Hfjdpfxjzrmtfe Ag Eon 2. Unit: Gluing unit 3. Unit: Pressure rollers – tools available 4. Unit: End trimming unit – tools available 5. Unit: Rough milling unit – tools available 6. Unit: Edge rounding unit – tools available 7. Unit: Radius profiling unit – tools available 8. Unit: Brushing unit – tools available Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 60 mm Panel length min.: 180 mm Feed rate control: Continuously variable Gluing system: Glue pot Voltage: 400 V Power consumption: 53.31 A Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,350 x 2,550 mm Shipping weight: 3,000 kg Note: The top and bottom stripping blades are currently not functional.

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data Hjdpfxezuypro Ag Esfn - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Tray Sealer Make: Webomatic Model: TL300 2015 With Busch Vacuum Pump Hfjdpfx Aozzd I Eog Ejn Mould set for Round pots

Condition: used, Schafberger+Sprödhuber Type BS electro-pneumatic pot-hinge drilling machine or fitting drilling machine for drilling pot hinges or fittings with mechanical centring. Technical data: Hjdpfx Aozrytxjg Eefn - Technical specifications: On request

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin For Hebrock K36 Hfsdpjznnlhsfx Ag Eon Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Hodpfxoz Iluqe Ag Esfn Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: used, Year of construction: 2009, Piston Type Semi-Automatic Pot Filler with Time Controlled filling. This can fill from 50grams up to 500 grams per piston stroke . Condition : Very Good Available Immediately Hedpfxjz Ru R Ij Ag Esfn Filling Type: Piston Volumetric Pump Filling Heads: Single Usage: Yoghurt, Ice cream, Pastes, Fruits, etc. Automation: Air Operated

Condition: good (used), Year of construction: 2017, Seal It Systems Rotary pot sealer Hfsdpfx Aez Dxpgog Een 2017, Stainless, rotary pot sealer, with magazine for pots and pre cut seals, heated sealing press and push arm piston to remove finished pots, previously used for small sauce dip pots 60mm x 40mm, with space to add a filling machine, HMI touch screen control, mobile

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Hfsdpfx Aoy Au Eyeg Een -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Hedpfsz Ni Hnsx Ag Eofn Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: Hodpfeztbutjx Ag Eofn - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: used, current capacity 8,0 kVA Hfodpfsz Sdy Njx Ag Esn throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. Hjdpfozx D Tcsx Ag Eofn The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm Hfedpfx Agoupy Abs Eon - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l