Used Point for sale (4,108)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: • Seriennummer: 71110476, Device 2: • Manufacturer: PBI Dansensor • Model: LeakPointer • Serial number: 71110476 • Year of manufacture: 2011 • Purchased: 2013 • Purchase price: Unknown, invoice not available. • Documentation available Duedpfx Afjxxxa Djkop Sale price: 500 EUR per device.

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 71040038, Unit 1: • Manufacturer: PBI Dansensor • Model: LeakPointer • Serial Number: 71040038 • Year of Manufacture: 2004 • Purchased: 2011 (as used equipment) • Purchase Price: Unknown, invoice not available. Dujdpfexxw Tiex Afkop • Documentation available Weight: 50 kg

Condition: used, Year of construction: 2009, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 4007342, pressure dew point: 3 °C, pressure (max.): 14 bar, Equipment: type plate available, Beko Drypoint RA 120, for collection, location Hildesheim 31137, still connected, test run possible Dsdpsw Slhpefx Afksup

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Dusdpfx Afjxuf Hvokop Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope Dedpfx Aoxc Nypefkoup of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1997, functionality: fully functional, BOBST Domino 90-A1 Folder Gluer for sale! Year 1997 Cold glue system ERO with 4 glue guns Dusdpfx Afexnzq Dekop Max width 900mm Min width 126mm Max speed 400m/min

Condition: new, Year of construction: 2026, functionality: fully functional, The FORMA MSF-4 is a high-precision round bar milling machine designed for the efficient production of cylindrical wooden poles and sticks. This industrial-grade machine is ideal for manufacturers of fencing, tool handles, and playground equipment. Key Technical Advantages: High Performance: Specifically engineered for smooth surface finishing at high feed rates. Djdpfx Afouab Acskoup Precision Milling: Capable of processing various wood types into perfectly uniform round bars. Robust Construction: Built for 24/7 industrial use with a 2024 year of construction, ensuring the latest safety and efficiency standards. Fully Functional: New condition, tested and ready for immediate operation. Why choose MSF-4? Ease of Use: Simple setup and minimal maintenance requirements. Versatility: Suitable for both softwood and hardwood processing. Quality Guarantee: Manufactured by FORMA, a trusted name in woodworking automation.

Condition: used, Year of construction: 1978, Year ca. 1978 für Stangenprofile und... ... für Flachmaterial material thickness max. 24 mm working length 300 - 600 mm efective widths 3 mal 170 mm drive motor 400 V, 11 kW, 50 Hz . Dujdpsx U A I Tsfx Afkjp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, Folding tap pointer . tube diameter 5 - 20 mm Dujdpfeit Ewfex Afkjp tag length 50 - 100 mm total wight 1,4 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Technical specifications Two-phase mains voltage : 400 V. Mains frequency : 50/60 Hz. Max. puncture current : 9700 A. No-load voltage MAX : 2,6 V. Thickness MAX tacking 2 sides : 3+3 mm. Max electrode force : 190 daN. Arms projection : 330 mm. Nominal power X=50% : 22 kw. Nominal power X=50% : 15 kw. Power factor : 0.7 (cosphi). Intermittence ratio : 15%. Dimensions : Djdohzg Ihopfx Afkoup 79 - 32 - 128 cm. Weight : 118 kg. Resistance welder (tacking machine) with column, swinging arm, with digital microprocessor control. The multifunction LCD digital panel allows to operate: in EASY mode (setting of current and tacking time); in EXPERT mode (setting of different tacking parameters) with the possibility to save up to 20 customized programs. Continuous and pulsed operation guarantees excellent welds on various types of steels. Features: adjustment of the welding current (%), welding time (cycles), pressure and speed of electrode closing choice of various welding cycle parameters (approach time, ramp time, welding time, pause time and number of pulses) easy-to-read LCD display pneumatic drive thermal protection with signaling air flow regulation for the slowing down of the arms closure Model requires cooling

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Dedpsymnykefx Afksup Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Djdpfx Afeyl U Tuokjup Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data is based on the original order confirmation. The seller cannot guarantee that it matches the current condition. TECHNICAL DETAILS Load capacity: 12,000 kg at load center 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Lowered height: 4,895 mm Extended height: 8,100 mm Mast tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm STEINWEG Stone Clamp Type HG1T-6000S TECHNICAL DETAILS Clamping width: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Load capacity: 6,000 kg Double clamping bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in stable and clean welded construction Splayed clamping arms with rotatable mounting With hydraulic cylinders, required valves, lines and fittings Including oil pressure gauge and connecting hoses to the rotator Additionally: one pressure gauge mounted 180° opposite the standard gauge Load arm & extension TECHNICAL DETAILS Extension: 1.6–2.1 m Load capacity: 8,000 kg at outreach of 1.6–2.1 m EQUIPMENT 1 telescopic forklift jib, double-beam design, with infinite rotator and pendulum suspension Including connecting hoses to the forklift 1 hydraulic extension with extension cylinder 1 pair of stabilizers (2) for pendulum movement compensation Integrated sideshift with sliding guides, sideshift range: 250 mm Wireless Pressure Monitoring (Clamp Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30 °C to +85 °C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation Dedjym Uu Uepfx Afkoup EMC System: Electronic control with 7" touchscreen Driver’s seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable sideways ADDITIONAL EQUIPMENT Front mud guards Rear mud guards External mirrors on high-mounted fenders Turbo II heavy-duty air filter Additional hydraulic function Quick couplings on carriage Accumulator/shock absorber 60 bar / 2 L in lift hydraulics Hydraulic oil tank pre-heating Additional LED headlights, 2 × on mast Reverse alarm LED beacon Electric cables above the mast Power connection 400 V, 3-phase Blue Spot lighting front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with speed boost EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/Analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Adjustable A4 writing surface LED reading lamp Diesel auxiliary heater + engine water heater Sun visor (roof/front) Panoramic rearview mirror Installation of attachments from other manufacturers Central lubrication system, basic version with 14 lube points

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, table load: 400 kg, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 410 mm Z-axis travel: 460–510 mm Table size (L × W): 700 × 410 mm Maximum table load: approx. 400 kg per pallet T-slots: 18 × 4 mm Pallet changer: Automatic pallet changer (APC) Changeover time: ~4 seconds Pallet clamping: 3-point clamping system (patented) Spindle taper: BT-40 / ISO40 Maximum spindle speed: 8,000 rpm Spindle motor: approx. 9 kW Tool magazine (ATC): 24 positions Tool capacity: 24 Maximum tool diameter: approx. 80–125 mm Maximum tool length: up to ~250 mm Maximum tool weight: approx. 7 kg per tool Tool change time: Rapid change arm Rapid traverse speed (X/Y/Z): up to approx. 30 m/min Feed rate: up to approx. 10,000 mm/min Dujdpfx Afeymw Tmekop Axes: 3 axes (X / Y / Z) MACHINE DETAILS Dimensions & Weight Machine dimensions (L × W × H): approx. 2,360 × 4,365 × 2,878 mm Machine weight: approx. 7,500 kg EQUIPMENT Automatic pallet changer (APC) 3-point clamping system for pallet fixing FANUC CNC control (e.g. 0iMB) LCD color display Automatic lubrication pump Coolant system incl. wash hose Chip conveyor Work light Electronic handwheel (MPG)

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. Dusdpfxeq I Nxdj Afkop 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Djdpfx Aevzx Ausfkeup Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders Duodpfxjytcalo Afkep • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2011, operating hours: 15,718 h, 2011 | Liebherr R906 LC Litronic with two buckets | Used Tracked Excavator | 15718 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 50 approved ✅ 15 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine in working condition but with some noted attention points. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "29883 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Duodpfxoyc N Rio Afkjp ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2008, lifting height: 15,300 mm, fuel type: electric, Drivetrain Drive: Wheel Dodpfsv Tkknsx Afkjup Weights Empty weight: 5.120 kg Functional Lifting capacity: 400 kg Working height: 1.730 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 3,28x1,22x3,28 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer PB Lift Type PB S171-12ES Built in 2008 Features Working height max 17,34 m Platform height 15,34 m Lifting capacity 400 kg Platform Capacity Extension 150 kg drive battery Platform dimensions LxW 2,79 x 1,17 m platform length pushed out 3,79 m total dimensions LxB 3,28 x 1,22 m Weight 5.120 kg Transport height with railing 3,28 m Transport height without railing 2,32 m travelable up to working height (inside) 17,17 m ground clearance 0,10 m only indoor use no Specifics White tires outdoor use only with supports stop Points for restraint systems (PPE) available Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2015, lifting height: 197,000 mm, Empty weight: 11.990 kg Lifting capacity: 750 kg Working height: 217.000 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 4,84x2,45 Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar B-195DL25 Year of build: 2015 Condition: Used Data: Max. working height: 21,70 m Platform height: 19,70 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Platform dimensions LxW: 4,38 x 2,20 m Platform lenght pushed out: 6,88 m Transport dimensions LxW: 4,84 x 2,45 m Height transport position with/without railing: 3,64 / 2,81 m Movable up to working height: 21,70 m Ground clearance: 0,19 m Dusdpex Sdwkjfx Afkop Only indoor using: no Drive type: Diesel Own weight: 11.990 kg Special features: White tires, all-wheel-drive, swing axle, soot filter, generator, anchor points for Personal Fall Protection Equipment (PFPE).

Condition: used, Year of construction: 2015, lifting height: 16,600 mm, fuel type: electric, Weights Empty weight: 8.660 kg Functional Lifting capacity: 550 kg Working height: 1.860 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,56x2,02x3,52 Additional information Duodpowfdarjfx Afkjp Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: HL190E20 Year of build: 2015 Condition: Used Data: Max. working height: 18,56 m Max. platform height: 16,56 m Lifting capacity: 550 kg Lifting capacity on extension: 550 kg Drive type: Battery Platform dimensions LxW: 4,05 x 1,83 m Platform lenght pushed out: 6,07 m Total dimensions LxW: 4,56 x 2,02 m Own weight: 8.660 kg Transport height with / without railing: 3,52/2,72m Movable up to working height: 18,56 m Ground clearance: 0,20 m Only indoor using: no Special features: white tires, PPE Anchorage Points.

Condition: used, Year of construction: 2015, lifting height: 31,000 mm, fuel type: electric, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 23.950 kg Functional Lifting capacity: 600 kg Working height: 3.300 cm CE mark: yes Dusdpfx Afjwd Nmnekjp Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 6,61x1,4x4,29 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Combistar HL-330 E14 4WDS-N Year of build: 2015 Condition: Used Data: Max. working height: 33,03 m Max. platform height: 31,03 m Lifting capacity: 600 kg Lifting capacity on extension: 600 kg Drive type: Battery Platform dimensions LxW: 6,39 x 1,19 m Platform lenght pushed out: 8,40 m Total dimensions LxW: 6,61 x 1,40 m Transport height with / without railing: 4,29/3,11 m Movable up to working height: 33,03 m Ground clearance: 0,16 m Only indoor using: no Own weight: 23.950 kg Special features: white tires, Platform extendable to 8.40 x 1.19 m, 4-wheel steering, all-wheel drive, Anchor points for restraint systems (PPE) available. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2011, lifting height: 15,300 mm, fuel type: electric, color: red, Drivetrain Drive: Wheel Weights Empty weight: 5.120 kg Functional Lifting capacity: 400 kg Working height: 1.730 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 328x122x232 Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer PB Lift Type PB S171-12ES Built in 2011 Dsdpfx Aev Tkgiefkeup Features Working height max 17,34 m Platform height 15,34 m Lifting capacity 400 kg Platform Capacity Extension 150 kg drive battery Platform dimensions LxW 2,79 x 1,17 m platform length pushed out 3,79 m total dimensions LxB 3,28 x 1,22 m Weight 5.120 kg Transport height with railing 3,28 m Transport height without railing 2,32 m travelable up to working height (inside) 17,17 m ground clearance 0,10 m only indoor use no Specifics White tires outdoor use only with supports stop Points for restraint systems (PPE) available Location: 41468 Neuss immediately available

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Dusdpfshqnl Tjx Afkep Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Dusdpfx Asd Ab Uuefkop Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.