Used Pneumatic Valve for sale (12,173)

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Godpfx Aev Tbpzsf Uobi Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Godov U Ad Njpfx Af Ujbi Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: - No-load speed: 20,000 - Power: 400 W - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,971 h, load capacity: 4,000 kg, lifting height: 4,100 mm, fuel type: electric, mast type: other, construction height: 2,780 mm, battery capacity: 930 Ah, remaining battery capacity: 88 %, battery voltage: 80 V, DGUV certified until: 03/2027, fork length: 1,800 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,100 mm Overall height: 2,780 mm Year of manufacture: 2019 Gbsdpfx Aeyhu Uwef Uji Operating hours: 1,971 STILL 4.0 ton electric forklift with full cabin and heating, very low hours, very good battery, good tires (rear tires new), telescopic full free lift mast, fork positioner with side shift by Meyer, mini-levers, two-pedal control, Blue Spot front and rear, lighting, fork length 1,800 mm, charger included. The following options/upgrades are available upon request (price on request): - Single-pedal instead of two-pedal control - Different fork lengths - Lighting per StVZO (German Road Traffic Licensing Regulations) Ex-works price, including 1,000-hour service according to STILL manufacturer's guidelines and valid FEM (UVV) safety inspection at time of sale. Inspection, demonstration, and test drive available by appointment. Sale to commercial customers only. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift economically with our own low-loader with ramps (transport costs on request). For more information and offers, please visit our newly designed website.

Condition: used, Rotary Feeder,Rotary Valve, Ventilatorenfabrik Oelde GmbH, used machine Manufacturer: Ventilatorenfabrik Oelde GmbH Type: MS 050-390 A Capacity / Speed: 58 liters; rotor equipped with 12 fixed rotor blades (cells) – 15 rpm Electrical data: 400 V; 50 Hz; 4.5 kW Gjdsytr H Uspfx Af Uebi

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: EB5 DW -Price: per piece -Quantity: 1 available Gbodpob A Nrhsfx Af Uoi -Weight: 3.6 kg

Condition: like new (used), Bosch Rexroth Control Valve 4WRPEH 6 C4B15P-3X/M/24A1, R901382359 Unused item from stock clearance Manufacturer: Bosch Rexroth Type: 4WRPEH 6 C4B15P-3X/M/24A1 Material number: R901382359 Valve type: Proportional directional control valve with integrated electronics Size: 6 Valve function: 4/4-way valve Actuation: Electric, with integrated electronics (OBE) Supply voltage: 24 V DC Control signal: ±10 V Nominal flow rate: 15 l/min Maximum flow rate: up to 30–40 l/min (depending on version) Maximum operating pressure: 350 bar Port pattern: ISO 4401-03-02-0-05 Mounting type: Subplate mounting Electrical connection: 7-pin connector (6+PE) to EN 175201-804 Seal material: NBR Weight: approx. 3 kg Protection class: IP65 with suitable connector Short description Direct-operated proportional control valve with electrical position feedback and integrated electronics for the precise control of flow and direction in hydraulic systems. Suitable for position, speed, and pressure control applications. Gsdpoyrx Txefx Af Ujbi

Year of construction: 2004, condition: excellent (used), pneumatic race LARIUS 10:1 For sale pneumatic press from the renowned company LARIUS, manufactured in Italy. The device is designed for pressing high-viscosity liquids - ideal for greases, adhesives, industrial paints, silicones, etc. Technical data: • Ratio: 10:1 Gsdpfxjwqx H Rs Af Ujbi • Max. liquid pressure: 70 bar / 1015 psi • Air working pressure: 3–7 bar (40–100 psi) • Capacity: 12 l/min at 60 cycles (3.2 gal/min) • Year of manufacture: 2004 • Production: LARIUS - Italy Very good condition

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003584 - Manufacturer Code: LCP2505AK-08 - Condition: As new (display item) - Functionality: Fully functional - Compatible Machine: - If interested, we offer overhaul service, please contact us. 1KG 20X20X20 Godpjyrn Sqofx Af Usbi

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003571 - Manufacturer Code: 434-015-22 - Condition: Like new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an inspection service, please contact us. 1KG - 20X20X20 Godpsyrn Nvofx Af Usbi

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003569 - Manufacturer Code: QS2A50A25PS01 - Condition: As new (showroom item) - Functionality: Fully operational - Compatible machine: - If interested, we offer a refurbishment service, contact us. 1KG 20X20X20 Gbedpfx Asyrn Niof Uoi

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description Gjdeyt Hu Topfx Af Ujbi The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used .

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm distance between columns 440 mm Gbedsyfwvrspfx Af Uji side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Gedpfxeyqr Sxs Af Uobi

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Gbedpfevxbmwjx Af Uoi Available immediately. CE version. Documentation included.

Year of construction: 2026, condition: new, Our machine is a one-head pneumatic oscillating blade cutting table designed for efficient processing of a wide variety of materials. EVA XPE EPP PE LEATHER HONEYCOMB CARDBOARD General Information Machine dimensions: 3310 x 1750 x 1370 mm Maximum panel size: 1300 x 2400 x 100 mm Maximum board size: 1300 x 2400 x 100 mm Gjdpfx Asytcv Tjf Ujbi Total installed power: 11 kW Cutting heads: 1 Maximum cutting speed: 700 mm/sec Maximum cutting thickness: 100 mm Oscillating blade, creasing wheel

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Godpfx Aexgty Uef Uobi Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Godpfx Asxgr Svof Ujbi Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: good (used), functionality: fully functional, Type DZ 4 Press force at 6 bar 4 t Gedpfxoyr Siao Af Uobi Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm Gbodpjyr H U Dofx Af Uei CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.5 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MOTOR 16 KW WEIGHT 11650KG

Condition: used, Pneumatic punching unit TÜNKERS or DE-STA-CO, pneumatic power cylinder Pneumatic punching frame, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No. 141-1040F Punching frame No. B-13-26/100 Punching force: 4 tons (40 kN at 8 bar) Air connection max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outside): Ø 22 mm - Stripper with Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg Gbjdpfxjxf Uqxs Af Uji very good condition

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, pressing force: 4 t, table width: 245 mm, table length: 360 mm, stroke length: 50 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Gedpfx Afjyn Hncs Uobi Max. stroke: 50 mm Max. pressing force: 4 t Table dimensions: approx. 360 x 245 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 700 x 1800 mm Machine weight: 600 kg EQUIPMENT On base frame External reference: Groven - Lot 5

Condition: not inspected (used), functionality: unexamined, table width: 200 mm, table length: 300 mm, No minimum price – guaranteed sale to the highest bidder! Bidding constitutes a binding obligation to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Table dimensions: 300 x 200 mm MACHINE DETAILS Gbodpsyn Hcmofx Af Usi Dimensions & weight Dimensions (L x W x H): 500 x 500 x 1400 mm Machine weight: 200 kg External reference: Groven – Lot 1

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7558 TECHNICAL DATA - Loading areas: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions (L/W/H): 4270x1600x2000 mm - Weight: approx. 800 kg ADVANTAGES – Two working zones – Gluing length: 3300 mm – Pneumatic cylinders – Used press, very good condition Net price: 10,900 PLN Gbjdpfx Afjyarabs Uei Net price: 2,600 EUR based on exchange rate 4.2 EUR (Prices may vary depending on significant fluctuations)

Condition: good (used), Hydraulic valve, pressure valve, filling valve, pre-fill valve Gsdpfxot Ultij Af Ujbi -Manufacturer: Rexroth, Filling valve type ZSF 160 FO-1-14/M/01 -Classification: NG160ZSF-160F1-1 -Nominal size: 160, A B, mechanically operated -Connections: G 1 1/4" / G1/2" -Individual components: see photos -Overall dimensions: 470/310/280 mm -Weight: 49 kg

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 Gsdporx Tatofx Af Usbi MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required