Used Pneumatic Valve for sale (11,805)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Hodpfx Asyqr Sxog Ienl

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 units unused rotary valve dosing feeders. Both feeder valves have been completely overhauled. New bearings and seals have been installed. ! Price per unit ! Manufacturer: Kreisel Industries GmbH Model: ZS315-1 Inlet / Outlet size: 300 x 300 mm Housing material: Cast iron / Rotor: welded steel sheet Installation height: 450 mm Number of pockets: 7 Bearings can be lubricated from both sides externally. Pocket dimensions: Length 300 mm / Width 100 mm / Height 40 mm Weight: 200 kg per unit Gear motors are also unused stock items. Manufacturer: Thurm DDR Year of manufacture: 1990 Functionality has been tested! Feeder valve 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical throughput: 10 m³/hour Feeder valve 2 Drive power: 1.1 kW Hedpfx Ajx N A N Tog Ijnl Speed: 25 rpm Theoretical throughput: 12.6 m³/hour

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Hnsdey Avb Aspfx Ag Isl Presses are fully operational and in use. For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: SMC, Maintenance unit filter control valve Hnedpfx Agex Ryhce Iol -Soft start valve: AV4000-F04-5Y0-X260-Q -Pressure switch: I SE30A-01-P -Filter control: AW40-F04H-A -Switching valve: VHS40-F04A -Individual components: see photos -Price/Fee: complete -Dimensions: 340/120/H250 mm -Weight: 2.3 kg

Condition: ready for operation (used), Year of construction: 2001, Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement. Hnedpfx Agsylzg Ue Iol

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Hedpfx Aefv Av Seg Ijnl Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 8,5 kN Hodpfx Agjfv Awas Ienl stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, MOOG D920-141 control valve- removed from running machine - fully functionalmanufacturer: MOOG Hnodpfx Agoyxg Thj Isl type: D920-141 type code: R08KB910HXYX

Condition: used, Rexroth proportional directional control valve with regulator- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Rexroth type: NG10 spare part no.: 10848665 Hnsdpfx Agoyxg S Ds Iol manufacturer no.: R900969493, R900031884 type code: 4WRSE 10 Q00-3X/G24K0/A1V-588=DE (4WRSE 10 Q00-32/G24K0/A1V-588=DE) / 4WRSE 10 V.-A1-32The number before the first slash describes the device series. For this reason, this number in the type code may differ from that on your old spare part. If you have any questions about this, please do not hesitate to contact us.

Condition: used, Year of construction: 1999, machine/vehicle number: 9093548, functionality: fully functional, Pneumatic press 63 tons Hnedpfxoyzhvpe Ag Iel

Condition: used, Year of construction: 1998, machine/vehicle number: 9083432, functionality: fully functional, Pneumatic press 125 tons Hjdeyzhqyepfx Ag Ienl

Condition: good (used), Disc valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN50 Hnodpfeb A S Eaox Ag Isl -Material: Stainless steel -Weight 2 kg

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, gate valve, diaphragm valve, diaphragm shut-off valve, flanged shut-off valve -Manufacturer: KSB, gate valve type BOA-W -Connection: DN 50 PN 6 -Number: 3x valve available -Price: per piece -Dimensions: 230/140/H260 mm Hnsdpsrp Ikrsfx Ag Iel -Weight: 8.6 kg/piece

Year of construction: 2006, condition: like new (used), Pneumatic crushing and sizing machine for band saw blades. Hjdpfxjd Sl H Hs Ag Isnl

Year of construction: 2006, condition: like new (used), Pneumatic crushing and sizing machine for band saw blades. Hjdpfx Aedy A A Nog Ienl

Condition: good (used), Rotaval H.D.200 Rotor: stainless steel Housing: aluminium Rotor clearance: Hedpfjyyziysx Ag Isnl Drive end: 0.18 mm Non-drive end: 0.18 mm Radial: 0.18 mm

Condition: new, Year of construction: 2026, Pneumatic press for the production of aluminum components, suitable for all types of grooving, punching, and drilling, featuring an adjustable-height ram and foot pedal operation. Maximum force / working load: 3,000 kg at 8 bar Pneumatic pressure: 6–8 bar Usable light (vertical clearance): 260 mm Stroke range: 0–35 mm Packing dimensions: 500 x 320 mm Ram speed: 23 mm/s Approximate air consumption per cycle: 25 liters Table dimensions: 530 x 340 mm Clear height: 260 mm Adjustable stroke: 0 to 35 mm OPTIONS: Rotary cabinet / base stand PACKAGING AND DIMENSIONS: 600 x 490 x 600 mm (86 kg) Standard packaging: wooden crate Hjdpfxepa Nw Ss Ag Ionl We look forward to hearing from you! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Blast carriage 10t for blasting system with pneumatic drive. - Pneumatic drive for 10t load capacity - Load capacity: 10 t Hnjdpsyyxfrsfx Ag Isl - Dimensions: L=2000mm W=2000mm H=500mm - For rail system - With mounting surfaces for workpiece holders - Rotary table as an option

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT Hedpfx Aoyypb Rog Ijnl ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, Sale of a pneumatic conveying station as shown in the photos. Hedpfx Ageyyc T Ts Isnl

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Bill of materials of the installed elements see attached PDF. EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment. Hsdpfx Agjyybits Ienl

Condition: new, For sale: EMG-DREHMO DR 39 B-40 electric valve actuator. The device comes from warehouse stock – condition: new, unused. Hnedpsyutpgofx Ag Isl Actuator designed for automatic valve control in industrial installations (water, gas, process technology, power engineering). Technical data • Manufacturer: EMG-DREHMO • Model: DR 39 B-40 • Year of manufacture: 2005 • Torque: 40 Nm • Power supply: 380–420 V / 50 Hz • Motor power: 0.40 kW • Speed: approx. 30–40 rpm • Protection class: IP67 Condition Device is brand new – warehouse condition. Visible transport marks: slightly bent handwheel, small crack in housing by the gearbox (visible in photos). Not tested under voltage – sold as warehouse device / to be checked before installation. Scope of delivery • EMG-DREHMO valve actuator • Handwheel for manual operation Visual condition as per photos.

Condition: new, pressing force: 3 t, Force 32 kN, stroke 100 mm Hsdpfx Aeyxmppjg Isnl

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Hsdpfx Aeb A Nrheg Ijnl -Type: EB5 DW -Price: per piece -Quantity: 1 available -Weight: 3.6 kg

Condition: used, Slide gate vacuum pump DK200 Status: Refurbished Warranty: 12 months Manufacturer: Leybold Type: DK200 Nominal motor power: 5,5KW Hjdpfxedbby Hj Ag Ijnl Nominal suction capacity: 200m³/h Final pressure without gas: less than 5x10e-3 Accessories: Operating manual with spare parts list Delivery: short term