Used Platform Trailer for sale (23,066)

Condition: used, overall weight: 38,000 kg, empty load weight: 6,970 kg, maximum load weight: 31,030 kg, axle configuration: 3 axles, first registration: 02/2022, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Gsodam Stake Trailer | SAF axles | 1st axle liftable | 3rd axle steering axle | Spare wheel holder | Wheelbases: 6200/1410/1410 mm | Loading platform length: 13,500 mm | Toolbox | Tyres: 385/65 R22.5 | Unladen weight: 6,970 kg, Payload: 31,030 kg | Stakes x6 | Subject to error, input and prior sale. Ibsdpfxexiq Uhj Afijc

Condition: new, overall weight: 53,000 kg, maximum load weight: 45,115 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate delivery and short-term notice, on our website. Extract from the equipment list. Complete specification available upon request. Cargo Area: * Cargo area with approx. 30 mm thick hardwood floor * 8 pairs of lashing rings foldable outwards (LC 10,000 daN) Landing Gear: Ibjdpfxjxl Nf Rs Afiec * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck takes place via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display these data. Axles and Suspension: * BPW axles, technical capacity per axle 10,000 kg * 1st and 3rd axles hydro-mechanically steered, mounted on turntable, 2nd axle fixed * Air suspension with lift/lower valve * Axle tool Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M) without interconnecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin ISO sockets * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned with shot blasting machine after welding * Second blasting with corundum for optimum coating adhesion * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * 4 wheel chocks with holder on the front wall * Storage for approx. 1,000 mm stake pockets in the central beam at the rear * At the gooseneck and rear panel, left and right, one bracket each for warning signs incl. socket * Yellow reflector tape according to EU regulations on the side and rear of the trailer * 10 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * European reflector boards (Red-Yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mudflap at the rear of the trailer * Manual and description on USB stick * 80 km/h speed stickers at the rear and on both sides * Electro-hydraulic power unit * 1 shunting coupling bolted with reinforcement to the end traverse * Axle load gauge to determine axle load including load diagram * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * Remote steering from front and rear via cable remote control with push buttons, with axle alignment control (without installation in the tractor unit) * 7 pairs of galvanised plug-in stanchions approx. 100 x 50 mm, approx. 1,000 mm high * 4 pairs of stake pocket rails, mounted transversely in the platform for plug-in stanchions approx. 100 x 50 mm * Spiral cable

Condition: new, overall weight: 39,000 kg, maximum load weight: 31,830 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2025, total width: 2,550 mm, total height: 2,970 mm, Equipment: ABS, Brand new Kässbohrer platform trailer Immediately available ! * BPW axles * Disc brakes * Lift axle * Twistlocks for 1 x 40' container, 2 x 20' containers, 1 x 20' container in the middle * Heavy duty lashing eyes * Perforated outer frame * 800 mm drop sides * Transport brackets for drop sides and stanchions * Stakes with transport bracket Isdoqafz Ispfx Afiobc * Stake pockets in the floor * Stainless steel storage box * Illuminated extra-wide boards * All-round warning light For further information please do not hesitate to contact us

Condition: used, overall weight: 23,000 kg, axle configuration: 2 axles, loading space length: 7,014 mm, loading space width: 2,236 mm, loading space height: 95 mm, first registration: 05/2019, next inspection (TÜV): 10/2026, * SAF axles Ibedpfx Afexiur Deijc * Storage box * Flatbed * Side walls * Unladen weight: 4,800 kg * Inspection (HU): 10.2026 * Safety inspection (SP): 04.2026 -----Internal vehicle number: 11330----Subject to errors & prior sale

Condition: used, overall weight: 39,000 kg, maximum load weight: 34,240 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, first registration: 11/2022, next inspection (TÜV): 11/2025, Year of construction: 2022, total width: 2,550 mm, Equipment: ABS, 3-axle flatbed semi-trailer FLIEGL Type SDS 390 First registration: 11/2022 German registration, one owner Gross weight: 39,000 kg Unladen weight: 4,760 kg Fifth wheel load: 12,000 kg Platform length: 13,650 mm Coupling height: 1,150–1,200 mm Full-load landing gear, 2-speed Ibjdpjxd I Uzjfx Afijc Plastic toolbox: 650 x 520 x 670 mm 2x additional LED reversing lights Floor: 30 mm anti-slip plywood, forklift axle load up to 7,100 kg Reinforced front wall, 1,950 mm high, high-volume design Outer frame slightly sloped, new 'Load-Lock' version for lashing strap attachment SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE KNORR trailer EBS with RSS vehicle stability system Tires: 6 x 385/65 R 22.5, tread depth 90% RENTING is the new BUYING — Full-service rental available immediately with us.

Condition: used, overall weight: 45,000 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, 24 month guarantee from first registration, hydraulically steered hydraulically steered Nato Stweckdose central lubrication system fifth wheel dimension 1120 - 1300 mm loading height 1340 - 1520 mm depending on fifth wheel dimension 10t lashing eyes in the edge frame spacing 1200mm excess length board remote control rotating beacon pluggable LED 220V socket extension lights 3 axle telescopic semitrailer 1x extendable up to 7500 mm (500 mm steps) loading floor 28mm hardwood 10 ton lashing eyes in the edge frame (spacing 1200 mm) stake pockets in the edge frame for stakes 81 x 5 1mm removable front wall made of steel 1800mm high Ibsdpfxemhd Rys Afioc

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,920 kg, axle configuration: 3 axles, first registration: 01/2025, Equipment: ABS, Kögel SF24 Platform Iedpfx Afsxdun Usijbc !!! LIKE NEW !!! 3 axles, air suspension with a lift axle, pallet box, 8 stakes, stake pockets, twist-locks for containers, 4 extendable warning boards with position lighting, disc brakes, ABS. Payload: 32,920 kg.

Condition: new, overall weight: 66,500 kg, maximum load weight: 56,590 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, More vehicles available at Extract from specification. Full specification available on request. Chassis Chassis frame constructed from welded longitudinal members and through-bolted cross-members * Underrun bumper approx. 700 mm wide * Fifth wheel plate at least approx. 8 mm thick, mounted between the main beams * Cross-member spacing max. 400 mm (for longitudinally laid floor) * 3.5 inch king pin to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty), S-foot Axles * 4 x 10 t SAF axles with large drum brakes * 22.5 inch single tyres * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension units each rated at 10 t capacity * Lift and lower system with 1 rotary slide valve Knorr/Wabco * Bracket for lift and lower device, bolted design Brakes * Smartboard/TIM/Info center on mount for lifting and lowering, in addition to lift/lower valve, without battery (operable only with tractor unit) * Holder for lighting and brake system at the front of underrun bumper, total height approx. 700 mm * Basic tyre pressure monitoring system, connected to EBS CAN-bus * With double release valve for brake and spring chamber * Test nipple for brake cylinder pressure at front right brake cylinder * 1 each red and yellow coupling head * Lift and lower control fitted to left rear side (in direction of travel) * EBS braking system make: Wabco * EBS diagnosis via CAN-bus (EBS socket), no diagnostic cable routed to outside! Tyres * 8 x 445/65 R 22.5 - branded make of our choice * Hub centring Lubrication Lubrication nipple strips on bogies and at the steering front * No central lubrication Bodywork * Without body certificate to DIN EN 12642 XL * 2x LED work lights mounted on top of front bulkhead (facing rear), switch on lift/lower holder * Heavy-duty front bulkhead suitable for platform * Contour markings: yellow sides, yellow rear * Front bulkhead approx. 800 mm high, with sheet metal cladding, bolted design Lighting system Work lights: 2x LED integrated in lamp panel, operated via reverse gear * 2x LED work lights, switched via reverse, one per side near landing gear * 2x LED reversing lights, one per side in front of the 1st axle Ibedpfx Afexfx Rvsioc * Lighting/electrical system make of our choice * Number plate illumination * The towing vehicle must provide sufficient power for the selected lighting (especially reversing light) * Position lights front, lower, one right and one left, white (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin sockets at the front via multifunction box * EBS socket * 1 pair of lane departure marker lights (LED) Floor * Hardwood floor approx. 28 mm thick, alternating with galvanized omega steel profiles Accessories * Vehicle swing-out sticker at the rear * Rear marking plate (ECE) as per our choice * Aluminium underrun protection * Folding and extendable rear right access ladder (without platform) * 2 wheel chocks with holders on front bulkhead * 2 rubber buffer stops at rear corners Mudguards * Rear mud flaps with ES-GE advertising * 180-degree plastic mudguards over each axle * 4 pairs of antispray mud flaps for single tyre configuration Paint/Coating * Chassis painted RAL 1007 daffodil yellow * Front bulkhead (steel construction) in RAL 1007 na

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, 1. Technical Data * Maximum permitted fifth-wheel load: 12,000 kg * Maximum permitted axle load: 24,000 kg * Maximum permitted gross weight: 36,000 kg (technically up to 39,000 kg) * Technical specifications for registration and manufacturer’s plate included. 2. Chassis and Body * Welded modular ladder frame construction * Multi Lock external frame for flexible load securing * Load compartment length: 13,620 mm, load compartment width: 2,480 mm 3. Protection and Safety * Rear underrun protection and side guard according to EC Directive * Rear access ladder * Two mechanical landing gears, operated from one side 4. Axles and Running Gear * 3 axles, each with 9,000 kg capacity * KRONE axles with air suspension and disc brakes (430 mm diameter) * Lifting and lowering device and automatic lift axle control * 1st axle as lift axle 5. Wheels/Tyres * 6-off, 385/65 R 22.5, M+S tread (Mud & Snow) * Smart Tyre Monitoring and TPMS (telematics services possible) * Wheel nuts with protective caps 6. Brakes & Electrics * Brake system according to ECE Regulation 13 incl. ABS and EBS system * Spring-loaded parking brake * Full LED lighting, side marker lamps with turn signal function, additional sockets 7. Floor & Interior * 30 mm thick, waterproof, sealed panel floor Ibsdpfx Asxhac Esfioc * Rear portal through loading height: 2,700 mm * Steel bulkhead with impact protection plate 8. Tarpaulin & Side Walls * PVC tarpaulin, sliding roof, reinforced and with tensioning mechanism * White roof tarpaulin, lateral and rear contour marking 9. Other Equipment * Toolbox, pallet stop, warning signs, beverage transport certificate * Telematics Premium included for 24 months 10. Paintwork & Appearance * Chassis deep black RAL 9005 * Bodywork blue RAL 5010 gentian blue * Rims natural silver * Side underrun protection white 11. Certificates * Load securing certificates according to EN 12642 XL and VDI 2700 Sheet 12 * EU certificate of conformity and registration certificate Part II

Condition: used, overall weight: 35,000 kg, empty load weight: 8,450 kg, maximum load weight: 26,550 kg, axle configuration: 3 axles, first registration: 04/2007, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Hangler platform semi-trailer, 3 axles | steering axle | BPW axles with disc brakes | GVW 35,000 kg | spare wheel holder + spare wheel | toolbox | extendable by 3 metres | tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Iedpfx Aswz Ekkjfiobc

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,606 mm, loading space width: 2,460 mm, first registration: 06/2006, ----Lifting axle / Storage box / Equipment for truck-mounted forklift ----* Isdsxbmawopfx Afiobc

Condition: used, overall weight: 45,000 kg, maximum load weight: 35,721 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,550 mm, first registration: 07/2024, next inspection (TÜV): 07/2025, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, 3-axle SANH FAYMONVILLE Max-Trailer 200 Mega-Platform forklift transporter First registration Fifth wheel height 950 to 1,050 mm Rear swivel radius 2,300 mm Loading area length 13,500 mm, extendable by 3,400 mm Loading area at the rear can be raised/lowered hydraulically over a length of 2,100 mm Cable remote control Can be driven over with an axle load of 12,000 kg 9 pairs of lashing rings (LC 5,000 daN) Ibsdpfxjw I Ix Nj Afiec 3 pairs of lashing rings (LC 10,000 daN) Tires 6-fold 435/50 R 19.5 TPMS tire pressure monitoring system BPW axles with air suspension, with disc brakes 1st axle LIFT AXLE 3rd axle self-steering WABCO Trailer- EBS Steel front wall approx. 1,200 mm high, EN12642-XL Hydraulic rear with grating 1 pair of aluminum docking ramps 1,500 x 450 x 120 mm Electric hydraulics 24-V 6 pairs of WADER container locks 10 pairs of stake pockets for stakes in the outer frame 3 pairs of stake pocket strips mounted across the loading area Extensions extendable by approx. 230 mm on each side Electric cable winch with radio remote control approx. 5,400 kg lifting capacity, 24 m. wire rope Extra-wide panels, extendable by 400 mm on each side RENT is the new BUYING, also available immediately from us in full-service rental-----

Condition: new, overall weight: 42,000 kg, maximum load weight: 33,190 kg, axle configuration: 3 axles, Equipment: ABS, Frame * Standard ladder-type frame of lightweight steel construction with cross members inserted through the frame * With camber (pre-camber) in the chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin compliant with DIN 74080 / ISO 337 Running Gear * For indivisible loads, an increase in the total towing weight is permitted * Axle lift mechanism on axle 1; control of axle lift fully automatic, load-dependent * Make: Kögel (or as specified by customer) * Tri-axle assembly with disc brakes, diameter approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm of travel Vehicle Tires * Wheels with internal sensors in compliance with UN ECE R141 * 6 x 385/65 R 22.5 UNIROYAL TH 50 tires * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments * Landing legs (make as specified by customer, Kögel) mechanical, with compensating foot, lifting capacity approx. 24 t. Single-sided operation, right side in direction of travel * Spray suppression system in accordance with (EU) Regulation No. 109/2011 * 1 pair of quarter-circle mudguards in front of the axles * 1 pair of straight mudguards with spray flaps between the 1st and 2nd axles * 1 pair of quarter-circle mudguards with spray flaps behind the axles * 2 wheel chocks with holder * Side underrun protection to ECE-R73 * 2 plastic toolboxes, waterproof, internal dimensions approx. 545 x 400 x 400 mm. Mounted at the rear, 1x left and 1x right * Retractable access ladder at rear right * Tall, rigid under-run protection at the rear made of steel to ECE-R58 * 1 pair each of extendable warning signs for oversize loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Positioned at the front and rear of the vehicle Brake / Air Suspension System * 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-actuated brake, external pneumatic connections, and external EBS diagnostic connector via ISO 7638 plug * EBS system (make as specified by customer, Kögel) * Air suspension system incl. 1 lift and lower valve, installed on the left in direction of travel, behind the axle assembly. Driving position self-adjusts automatically * 2 non-interchangeable coupling heads in front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) Ibjdpexcdmqefx Afiec Floor * Floor plates approx. 30 mm thick * Floor all around with sealed joints * Stake pockets for square insert stakes approx. 80 x 80 mm, arrangement as per drawing J9: 8 stake pocket strips (18 stake pockets per strip: 4 outside + 10 in the middle per strip) Front Wall * Storage for max. 14 square insert stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing capacity approx. 1,000 kg per ring) on the front wall as per EN 12640 Side Wall * VarioFix steel slotted external frame * 24 pairs of lashing rings in the external frame (to EN 12640), permissible lashing capacity approx. 5,000 kg per ring Bumper Protection * 1 pair of steel buffer bumpers approx. 160x85x85 mm mounted outside on rear frame end plate * Cross member steel angle galvanized as forklift protection and central lock cam protection, mounted on rear frame end plate Electrical / Electronics * Steel light

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,250 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details ? Loading area length: 13,620 mm ? Loading area width: 2,480 mm ? Fifth wheel height: 980 mm ? Multilock outer frame, universal load securing option every 100 mm _____ Axles/Tires ? BPW axles ? Air suspension ? Wheelbase: 1,310 mm ? Brake discs (370 mm diameter) ? Wheel nuts with protective caps ? 1st axle as lift axle ? Tire monitoring system ? Odometer _____ Attachments ? Toolbox ? 10 pairs of 81 x 81 mm stake pockets in the outer frame ? 15 pairs of Multi-Lash lashing rings ? 10 stake pockets, 81 x 81 mm, centered in the floor Ibedpfx Ajn Hrtkefiec ? 12 insert stakes, total length approx. 1,950 mm ? 12 pillars, total length approx. 1,950 mm ? 30 mm thick, waterproof floor panel _____ Accessories ? 2 overhead marker signs including marker light ? Pillar storage on the left side for 12 pillars _____ Lighting ? Multifunctional taillights (Hella) ? 2 LED license plate lights ? LED side marker lights with flashing lights ? Rotating beacon (orange) ? Including 1 reversing light _____ Paintwork ? Chassis: RAL 9005 - jet black ? Rims: natural silver ? Landing gear: RAL 9005 - jet black ? Axles: RAL 9005 - jet black ? Bulkhead: RAL 7035 - light gray

Condition: used, overall weight: 36,000 kg, empty load weight: 7,460 kg, maximum load weight: 28,540 kg, axle configuration: 3 axles, wheelbase: 1,310 mm, first registration: 02/2012, suspension: air, tire size: 385/65 R22,5, total length: 2,550 mm, total height: 13,900 mm, Equipment: ABS, Hangler Plateau 3 axles | BPW axles, 1st axle lift axle | GVW 36,000 kg | Payload: 28,540 kg | good condition | Toolbox | Recessed lashing rings | Tyres: 385/65 R22.5 | Length: 13.90 m | Wheelbase 1310/1810 | last axle steered (turntable) | Subject to errors, input mistakes, and prior sale. Ibsdpfsw Uqa Nsx Afijc

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Ijdsw U H Sbjpfx Afijbc Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,400 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2025, total width: 2,480 mm, total height: 2,000 mm, Equipment: ABS, Brand new Krone Profil Liner SDP 27 3-axle platform trailer * Krone axles * A-axle as lift axle * mechanical support winches (12t) * Tires: 385/65 R22.5 * 1x plastic tool box * Pallet box for 24 Euro pallets * Fifth wheel height: 1,150 mm * Spare wheel holder * Reinforced front wall * MULTILOCK outer frame * 6 pairs of heavy-duty lashing eyes * Stake pockets on the side and in the middle * Six extendable stake pockets on each side * Six cable winches on each side for load securing Ibedpfx Afevw Hlcjisc * 18 insert stakes * 4 illuminated over-width signs * ORANGE rotating beacon Example photos We are happy to provide you with further information.

Condition: used, overall weight: 38,000 kg, empty load weight: 6,920 kg, maximum load weight: 31,080 kg, axle configuration: 3 axles, first registration: 09/2023, suspension: air, tire size: 385/65 R22.5, total length: 2,550 mm, total width: 4,000 mm, total height: 13,200 mm, Equipment: ABS, | Gsodam Plateau with stanchions | SAF axles | 1st axle liftable | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | 6,970 kg tare weight, 31,080 kg payload | Stanchions | Austrian vehicle | Very good condition | Subject to error and prior sale. Iedew Hw Ufepfx Afiobc

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,340 kg, axle configuration: 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis * Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads Coupling Device * 2-inch kingpin Underrun Protection * Bolted version, compliant with EU regulations Isdpfx Aowbb Ufofijbc Side Guard Protection * Compliant with EU regulations Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel) Axles * 3 x 9 t air suspension axle assembly * Disc brakes * Manufacturer: Gigant Brake System * Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS * Automatic load-dependent control * Spring-actuated cylinders for parking brake * Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit) * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards * Compliant with EU regulations * PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier * 1 double basket incl. mounting material for one spare wheel with ET 120 Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * External frame with drilled holes every approx. 500 mm for tension belts Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the external frame Lighting System * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights front (white) * LED outline lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember Paintwork * Chassis and front wall blast-cleaned, primed, and painted in a single color * Chassis: RAL 3002 carmine red * SSV: anodized aluminum * Underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Additional Equipment * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stake pockets in the external frame, evenly distributed * 4 rows of stake pockets across the load floor * 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm * Inside the front wall, a magazine for 20 plug-in stakes * 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable * Removable Kinnegrip stakes * Sliding rails under the chassis left and right for side boards and stakes * Work light on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, overall weight: 66,500 kg, maximum load weight: 56,570 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice Ibodewx Dctepfx Afiec * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: new, overall weight: 45,000 kg, maximum load weight: 39,850 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment Ijdpfx Ajwx Dbpjfiebc - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,610 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Ibjdpfswyhy Esx Afiec Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, overall weight: 76,500 kg, maximum load weight: 63,960 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. The following is an extract from the specification. Complete specification available on request. Chassis: - Welded construction made of high-quality steel profiles with through-go crossmembers, designed for high point loads - Outer frame made of UNP steel Coupling equipment / fifth-wheel load: - 2-inch kingpin - Technically permissible fifth-wheel load: 26,500 kg Underrun protection: - According to EU regulations, bolted design Side impact protection: - According to EU regulations Landing legs: - Landing legs with single-side operation, support load approx. 66 t / lifting capacity approx. 24 t Axles: - 5 x 10 t air suspension axle units, make: SAF, with drum brakes approx. 400 x 200 mm - ABS - Wheel attachment, center-bored, 10-hole, offset ET 0 - Total air suspension stroke: approx. 200 mm, lift approx. 140 mm, lowering approx. 60 mm; control via rotary valve with detent function Steering: - 1 axle with leading steering, 2nd axle rigid, 3rd, 4th, and 5th axle with mechanical forced steering (Tridec) - Greasing points are routed centrally to the outside Axle lift: - First and second axle automatically liftable, with additional cut-off at the chassis Brake system: - Two-line pneumatic brake system according to EU regulations with EBS and RSS, automatic load-dependent control, make: Wabco 4S/3M - Spring-actuated cylinders as parking brake - Interlocked coupling heads mounted securely on the front crossmember, no connecting line to the towing vehicle - Aluminum air tank Tyres: - 10 x 445/65 R22.5 164J on rim 11.75 x 22.5 ET 0 – brand of our choice TPMS: - Tire pressure monitoring system - TPMS according to ECE R141, with data transmission to towing vehicle Fenders: Ibodpfx Afowx Dcaeisc - According to EU regulations: 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with 1/4 PVC fender - Rear fender with mud flaps Load securing: - 5 pairs of folding lashing rings, evenly distributed (pulling force approx. 14 t) - 11 pairs of hook plates welded into the outer frame (pulling force approx. 3 t) - 10 pairs of lashing rings in the side outer frame, evenly distributed (pulling force approx. 8 t) Stake pockets: - 10 pairs of stake pockets set into the outer frame - 6 pairs of stake pockets set into the floor (at the outer longitudinal beam) Removable stakes: - 16 pieces galvanized plug-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stake magazine: - One magazine per side in front of the front wall, each for 8 plug-in stakes approx. 80/80 mm Front wall: - Bolted corner stakes filled with aluminum hollow profiles, inside with a steel collision plate across the entire width and height Floor: - Approx. 28 mm Z hardwood flooring, let into the outer frame, flush-mounted Lighting system: - According to EU regulations, 24 V with multi-chamber lamps - LED side marker lamps - LED position lamps white front - LED outline marker lamps rear - License plate lamps - 1x15 and 2x7-pin plug connections on the front crossmember Equipment: - Wheel chocks with double holder - Warning sign in accordance with ECE 70 - Work spotlight on lamp mounting (activated via reverse gear) - Holder for rotating beacon at the rear (incl. rotating beacon) - 1 piece climbing ladder mounted rigidly on each side left and right, incl. removable climbing aid - Smart Board - Sticker indicating vehicle swing-out - Sticker indicating load cen

Condition: new, overall weight: 39,000 kg, maximum load weight: 32,340 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads Coupling device: * 2-inch kingpin Landing gear: * 2 x 12 t landing legs with compensating foot and single-side operation on the right front side Axles: * 3 x 9 t air suspension axle units * Disc brakes * SAF brand, with disc brake approx. 430 x 45 mm * ABS * Centrally positioned wheel mounting, 10-hole with ET 120 * Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent Brake system: * Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice Mudguards: * According to EC, PVC mudguards in front of and behind the axle unit Spare wheel holder: * 1 double basket incl. mounting kit for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t * Outer frame with holes for tension straps approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting system: * EC compliant, 24 volts with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross member Ijdpfxewx Db Ae Afiebc Equipment: * ECE 70 warning board * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single color * Chassis: RAL 3002 (carmine red) * Sideboards: Anodized * Sideboard stanchions: RAL 3002 (carmine red) * SSV: Aluminum anodized * Hubs: KTL coated * Rear underrun guard: white (RAL 9010) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading deck * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front wall * Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis * Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon Ibjdpfx Afjugqvfjiec * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right