Used Plastic Cups for sale (7,053)

Condition: ready for operation (used), Shredder for plastic 45kw power , can chop foil and other plastic into small chunks. The shredder has also soft start box. Hsdpfoxf Txzsx Ab Dow

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Hedpfxou Ti Tvo Ab Dsw Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: used, Packaging machine, strapping tool, and automatic strapping machine ORGAPACK Type CT 2650 Strapping machine for plastic strapping Automatic strapping machine, automatic strapping machine for PP strapping Machine No. 1624, built approx. 2010 Table size: 930 x 470 mm Working height: 700 to 800 mm Maximum frame width: 930 mm Maximum frame height: 700 mm Package width: max. 900 mm Package height: max. 680 mm Package width: min. 80 mm Package height: min. 30 mm Strap width: max. 12 mm (installed is 12 x 0.55 mm) Tension force: 10 to 500 N Coil width: 180 mm Power supply: 400 volts, 50 Hz. - Fully automatic strapping machine for PP plastic packaging strapping (polypropylene packaging strapping) - Sealing unit with heat-welded seal (heat wedge seal) - Continuously adjustable strap tension via electric slip clutch - Electric foot switch - Strap dispenser fixed to the side of the machine - Stainless steel table with steel rollers - Mobile on casters - Operating instructions - Included is a roll of plastic packaging strapping 12 x 0.55 mm, Ø 400 mm (black) Function: The strap is located in the outer frame. The strap is automatically wrapped around the object to be packaged (carton) and inserted into the clamping point. The tensioning mechanism is electrically triggered. Hodpfxsukxwmo Ab Dew Once the tension is reached, the strap is welded and separated. The strap then immediately re-runs automatically through the outer frame. Dimensions L x W x H: 1540 x 520 x 1630 mm Weight: 160 kg Good condition

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Hedpfxoxd D I Rs Ab Dow

Condition: used, Used bucket elevator with plastic buckets from Apollo High capacity (15 t/h) Lifting height = 6.66 m Hedpfx Aboxd U Ego Dow Gentle product handling Some buckets only 3 years old! Bucket width = 750 mm Hydraulic chain tensioning

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Technical data: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm Hodpfx Ajt H Ibmsb Dsw - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rotordiameter: 450 mm Hsdpfx Abswwwhys Djw Rotorwidth: 600 mm 9-knives rotor, 2 rows of statorknives Drive 37 kW New control cabinet Comes with a sieve of 12mm and 15mm

Year of construction: 2003, operating hours: 0 h, condition: good (used), machine/vehicle number: 00278, ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Hjdefh Slpjpfx Ab Djw Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Standard equipment has: Photoelectric cell, automatic cleaning system, 100% full sensor with machine stop, special roller cardboard / plastic / crate, system humidification, loading hopper on the front, management by PLC. Can work in cold condition until (-30 ° C), it has an antifreeze tank. Price/Pret Euro 2.850 + TVA Ex Works Loaded: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2015, condition: used, Plastic crusher, power 55 kW, capacity 600 kg/h Hsdpexdibvefx Ab Dew

Condition: used, • Year of manufacture: 10/2018 • Serial no.: 2502 • Glass thickness from 4 mm to 24 mm • Maximum processing dimensions: length 3250 x height 2000 mm • Length – 7000 mm, width – 2400 mm, height – 2800 mm • Connected load – 400V – 50 Hz Hedpfxsw Uurio Ab Dsw • Air pressure – 6 bar • Water pressure – 3 bar • Price on request

Condition: used, Trepko filling machine for cups type 106 K.S. (P) Producer: Trepko Denmark Capacity 80 packing/min. 2 lane cup filler 2 format tools sets for cups 80 x 95 mm & 80 x 115 mm Can uses for Butter, margarine, yoghurt, soft cheese, etc. Incl. pallet with extra spare parts Hjdpfsfvqm Rex Ab Dew

Year of construction: 2016, condition: good (used), functionality: fully functional, HDPE extruder, head diameter 70 and 100 mm, screw diameter 50 mm, width up to 700 mm, 12-30 micron, single winding Hodpfxsxb A Uqo Ab Dew

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with two GlobeTech tub lidding machines which worked in line with it. Hodpfxspfdhpo Ab Dew

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Hedpfxsr Dufbe Ab Dew Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), Year of construction: 2025, Additional Equipment Included in the package: 1x Form Wash L – Wash Station 1x Form Cure L UV Curing Chamber Separate stainless steel wash tank 1x used tank and mixer included Accessories (unused and in original packaging): 3x Resin Tank Form 4L 3x Resin Mixer Form 4L Resins Included: 1x 1 liter Resin White V5 3x 1 liter ESD Resin Black V5 3x 1 liter Resin Clear V5 Additional Equipment Included in the package: 1x Form Wash L – Wash Station 1x Form Cure L UV Curing Chamber Separate stainless steel wash tank 1x used tank and mixer included Hedpfew N Tmnex Ab Dow Accessories (unused and in original packaging): 3x Resin Tank Form 4L 3x Resin Mixer Form 4L Resins Included: 1x 1 liter Resin White V5 3x 1 liter ESD Resin Black V5 3x 1 liter Resin Clear V5 This FORMLABS 4L was manufactured in 2025. It includes a Form Wash L, Form Cure L UV Curing Chamber, and multiple accessories like unused resin tanks and mixers. Contact us for more information. Application Types 3D Printing

Condition: new, 🧰 Product features • Condition: new • Colour: black • Volume: 43.7 l • Load capacity: 20 kg • Net weight: 1.2 kg • Length: 60 cm • Width: 40 cm • Height: 22 cm • Stackable: Yes • Dimensionally stable: Yes • 40 units per pallet 💰 Price: €15 net excl. VAT 💰 Price from 40 units: €12.90 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide, on request • Delivery time: Immediately available • Inspection and collection: possible at any time by prior arrangement Hsdsk Shvuopfx Ab Dew Over 5,000 linear metres of pallet racking from various manufacturers in stock at all times (Technical data, specifications and prices subject to change. Prior sale reserved. Please refer to our T&C. All prices ex warehouse excl. VAT.)

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Hedjwg R Rtopfx Ab Djw

Year of construction: 2012, condition: good (used), functionality: fully functional, machine/vehicle number: 1209107, T-shirt bags blocked, width 200-350 mm, length 280-700 mm, thickness 8-30 microns Hjdpfx Absxb An Dj Dow

Condition: used, Used plastic tank Article number: 10856 Last application: Chemical Volume: approx. 2300 L Type: Vertical Material (media-contact): Plastic Hjdpfxsw Skile Ab Dow Design: Single-wall Operating pressure according to nameplate: ATM Tank dimensions: External diameter: 1550 mm Internal diameter: 1500 mm Cylindrical height: 1260 mm Total height: 1700 mm Total width: 1870 mm Features: Nameplate: no Heating coil defective

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Hjdpfx Aew Hz T Esb Dew

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Hodsw Nb Itepfx Ab Dsw Application Types 3D Printing

Year of construction: 2018, condition: ready for operation (used), Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible. Hodpfx Abswqqwhj Dsw

Condition: used, Automatic machine for producing plastic bags for T-shirts or shopping bags Manufacturer: COSMO Model: ST-99 Bag size: - length: 350 - 650 mm Hsdpfx Aborww E Is Dew - width: 160 - 365 mm - thickness: 0.008 - 0.05 mm Throughput: 180 - 300 pcs/min Installed power: 12 kW Power supply: 230 V, 3 phases, 50/60 Hz Dimensions: 7150 x 1600 x 1750 mm Additional air compressor required: 10 hp - not included Technical condition: used machine

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 130669, loose bags, width 200-1100 mm, length 200-1500 mm, thickness 15-150 microns Hodpfx Ajxb Ad Seb Dew

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Engine Power: 75 kW Hodpfxewav Hmj Ab Dow Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used