Used Plasma Cutting Drilling for sale (18,244)

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Pedehzbipjpfx Amyegp Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2026, - Thread cutting attachment - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical safety feature - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Overhang: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: manual - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): manual - Spindle speeds, stepless: 60 – 6,000 rpm Pedpfjfx U D Ajx Amysgp - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (dependent on pitch): M6 - MANUFACTURER'S WARRANTY: 3 years (single-shift operation) - OPTIONAL Drilling kit 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and quick-release drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE SHIPPING (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Pgjdpfx Amjqntkijyjp Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Condition: ready for operation (used), Year of construction: 2013, This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information. Application Types Cutting Podox D Npaepfx Amyjgp

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Pgedpsx D It Rjfx Amyjp Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2008, General Data Psdpfxsx D Ey Ie Amyogp Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Control Unit Brand MicroStep Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Pgjdox D Hz Hopfx Amyop Application Types Cutting

Year of construction: 2007, condition: ready for operation (used), - USED - CNC PLASMA CUTTING MACHINE WORKING AREA: 6000 x 2000 x 60 mm GENERATOR: HYPERTERM HPR130 Pjdpfx Amjyru Rgsyjgp CONTROL UNIT: GASPARINI MAX CUTTING SPEED: 0,1 - 30 m/min WEIGHT: 4400 Kg OVERALL DIMENSIONS: 6910 x 3150 x 1581 mm ACCESSORIES: FUME EXHAUSTER NOTE: MACHINE REVISED IN 2026

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Pgsdpjgbdpkefx Amyep Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Year of manufacture: 1990 Podpfxedzqccj Amyegp Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Pgodpodzqa Hofx Amyjp Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, working range: 3,000 mm, sheet thickness (max.): 40 mm, The information was found successfully. Here is the updated listing with added cutting parameters: Teknohaus Thermcut 3000D – CNC Plasma Cutting Machine For sale: a well-maintained Finnish-made CNC plasma cutting machine. The machine has been used in production and operates flawlessly. Technical specifications: Manufacturer: Suomen Teknohaus Oy Model: Thermcut 3000D Year of manufacture: 2007 Serial number: 320011 Supply voltage: 3 × 400 V Plasma source: Hypertherm HyPerformance HPR130 (130 A) Controller: Thermcut / Teknohaus CNC controller with touchscreen USB interface for program transfer Pgsdoywlh Uepfx Amysp Cutting capacity (mild steel): - High-quality, virtually dross-free cut: 16 mm - Production piercing: 25 mm - Maximum cutting thickness (edge start): 38 mm Features: - Large cutting table (approx. 3000 mm wide) - Two plasma channels (Plasma 1 & Plasma 2) - Water table for spark and fume management - Ideal for cutting steel, stainless steel, and aluminium Machine viewings available by appointment; the machine can be seen in full working order. 📞 For further information, please call.

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Psdpfxsv I U Hcs Amyogp Sold without cutting table.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Pgodpfx Ameyi Ub Hoyep Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: good (used), Year of construction: 2010, Offer 25375 Technical Data: - Working area / cutting length with approx. 5 m rails: approx. 3000 mm - Working area / cutting width: approx. 1500 mm - Controller: BACH Pjdpfx Amsxnivzsyogp - Track gauge: approx. 1900 mm - 1 plasma torch with height adjustment - Plasma source: KJELLBERG Hi FOCUS 160 i - Cutting current at 100% duty cycle: 10 - 160 A - Cutting range (steel): approx. 5 - 50 mm - Cutting range (aluminium): approx. 5 - 35 mm - Cutting range (stainless steel): approx. 5 - 30 mm - Connection: 400 V / 35 kVA - Extraction table with extraction unit, make: TEKA, type: Filtercube 4 H, year 2010 - Weight: approx. 4 t - Space requirement for system: approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction unit: approx. L 1.5 x H 3.5 x D 1.5 m

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Podsyug Enspfx Amyjgp

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Pgodpfx Amewk Nxqeyop Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Pedpoxciumsfx Amyjgp Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20515021, table length: 6,000 mm, table width: 2,500 mm, Equipment and features: Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Lower cutting table dimensions 2,5 x 6 m Equipment: - heat recovery and flue gas suction system included in the shop Pgedpfou Rnkwex Amysp The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus.

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Pgodjygk Sijpfx Amysp Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg Pedpfsx I Ehpjx Amysgp EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: new, Year of construction: 2026, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request Pjdpfxsh I Eitj Amyogp ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES Pgsdpfoh I Nw Dex Amyep ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 2,200 kg, input voltage: 400 V, total width: 3,000 mm, total height: 1,800 mm, total length: 4,300 mm, workpiece weight (max.): 1,000 kg, power of the servo motor: 750 W, working width: 1,550 mm, positioning speed: 50 m/min, table width: 1,550 mm, cutting current: 100 A, warranty duration: 24 months, working length: 3,050 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, Kompakt plasma cutter manufactured in Poland! Brand new machine, lead time from 8 to 12 weeks. Key features: - robust mechanics based on a welded and stress-relieved frame, - hardened helical rack gears, - fume extraction flap control system for enhanced extraction efficiency, - drawers for small parts and for easy cleaning of the combustion chamber, - one of the fastest machines on the market – 50 m/min, - ThermaCut EX-TRAFIRE 100SD plasma unit, - intuitive, straightforward controls, - fume extraction fan. Alternative configurations possible: Pgodpjykpp Iofx Amyep - change of working area - use of a different plasma unit

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 24 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Psdpfx Aoxw Ihhemyjgp Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. For more detailed information, please contact us.