Used Planer Matcher for sale (1,591)

Condition: excellent (used), Catalogue number 7693 TECHNICAL DATA - shaft width: 810mm Codpfxex Thp To Abbegn - max workpiece thickness: 170mm - 4-knife cutterhead * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure Cjdpfx Absx Thcmjbsgn - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: excellent (used), Catalogue number 7835 Cgjdpfx Asx Armxebben TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables Cgjdpfx Aox Tgwcsbbjn - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: used, Sunderland No 5 B Gear Planer, Gears, Tailstock, Mandrels. Codpeyb Sfgofx Abbegn

Condition: used, Technical data: Max. planing width: 330 mm Cutterhead diameter: 110 mm Cgjdoybn R Sjpfx Abbjn Number of knives: 4 Total table length: 2410 mm Table height adjustment Tilting fence Safety switch Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2410 mm Width: 750 mm Height: 1050 mm

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm - Shaft with 4 knives Cjdpsya Drvofx Abbegn - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: used, Various planing heads for the Weinig Unicontrol. Bore 40 mm. Cedpfx Aovzud Usbbegn

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23750, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,300 mm, spindle speed (max.): 24,000 rpm, overall weight: 120,000 kg, grinding spindle motor power: 32,000 W, We offer this used FOOKE Endura 905 Linear planer-type milling machine - double column, year of construction 2008. Machine type: Endura 905 Linear Year of manufacture: 2008 Voltage: 400/230 V Frequency: 50 Hz Power: 130 kW Cgedeyazmkspfx Abbsn Electrical enclosure rating: IP54 Weight: 120000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Bäuerle -2-blade shaft -plane width 41cm Cedpohu Haxefx Abbsgn -swivel fence -Total table length 221cm -incl. fan stop -incl. 2 interchangeable knives 3 new V-belts Robust and heavy planer. Viewing and test planing possible by appointment

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: Codpet Eu Htefx Abbegn planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Year of construction: 1980, condition: good (used), Gubisch planer and moulder 172/7 S/N 3425 80 Year of manufacture 1980 length of the planing table 1950 mm planing width maximum 170 mm planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.bottom planing shaft 7,5 kW 2.right joining shaft 3,0 kW 3.left shaft 4,0 kW 4.right shaft 4,0 kW 5.Top Thickness Shaft 4.0 kW Codpfjgrmymex Abbogn 6.Top Thickness Shaft 5.5 kW 6.Uni shaft top / bottom 3,0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1,5 kW Feed speed infinitely variable 5 - 30 m/min. weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical data under reserve

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 Cgjdsx S Rx Ijpfx Abben toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Cgedpfsx S Ngkox Abbsn Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: new, Catalogue number S0232 - New machine, in stock - CE certificate Cgedpfxex S I Rzo Abbsn - Shaft width: 410 mm - 4-knife shaft - Protected cutter head Ø 125 mm - Planer knives: 410x35x3 mm - Cutting depth: 8 mm - Speed: 4700 rpm - Motor: 4.0 kW - Power supply: 3x400 V - Table length: 2650 mm - Infeed table length: 1500 mm - Outfeed table length: 1100 mm - Tilting fence 0°–45°, 1500x155 mm - Extraction port Ø 160 mm - Dimensions (L/W/H): 2650/900/1000 mm - Weight: 720 kg Net price: 21,000 PLN Net price: 4,900 EUR (based on 4.20 EUR exchange rate) (Prices may change due to currency fluctuations)

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Cedpfx Ajx S Inmobbogn Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations) Cedpsx Syq Tsfx Abbsgn

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table – Unpainted – Used jointer, in very good condition Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Cgedpfx Ajx Symbobbjn Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: used, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, planing height: 240 mm, planer shaft diameter: 125 mm, working width: 630 mm, type of input current: three-phase, – Manufactured in Poland by Jaroma – DTR technical documentation available TECHNICAL SPECIFICATIONS: – Shaft width: 630 mm – Knife shaft suitable for multiple resharpenings – Knife shaft diameter: 125 mm Cgodpfsw Ip Sqex Abbsn – Knife shaft rotation speed: 6000 rpm – Max. workpiece thickness: 240 mm – Adjustable rollers in the lower table – Motor: 5.5 kW – Electric height adjustment – Two feed speed options – Overall dimensions (L/W/H): 120 / 128 / 125 cm – Weight: 1060 kg

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES Cgjdox Syk Hspfx Abbsn – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES Cjdex Syhxepfx Abbegn – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers Cgedpfxex Syblo Abbjn - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Cgodpfxex Syazs Abben Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm Cgodpsx Sx U Refx Abben - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: new, Catalogue number: S097 ADVANTAGES – Brand-new machine, in stock – Roll width 530 mm – 4-knife planer shaft – Upper control panel – Long working tables – With noise reduction comb by the roller – 5.5 kW motor – Sturdy construction TECHNICAL DATA Working width: 530 mm Working table dimensions: 2900 x 540 mm Max. processing depth: 8 mm Cutterhead speed: 4700 rpm Cutterhead diameter: 125 mm Number of knives: 4 pcs Knife dimensions: 540 x 35 x 3 mm Cgodpfsx Sx Uqox Abben Cast iron fence dimensions: 1500 x 155 mm Motor power: 5.5 kW Suction: 160 mm Weight: 800 kg Net price: 27,000 PLN Net price: 5,960 EUR