Used Piston Kompresor for sale (1,864)

Year of construction: 1999, condition: good (used), I am selling 3 more or less identical piston diaphragm pumps from GEHO, type ZPM 400. Built in 1999, max. 29bar, max. 15 m3/h, engine 28 kW. Cpodpfoq Tprrox Aa Eow Technical documents are available and pumps were used as a transport pump in a sewage treatment plant. Location is 58762 Altena in the Sauerland, can be loaded freely

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Cpedpfx Ajvr Eicoa Eow Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: used, Waelz piston pump (Roots blower) Status: Overhauled Manufacturer: Leybold Type: WSU 251 Warranty: 12 months Accessories: Instruction manual; Spare parts list; Oil refill Codpfxecnyzre Aa Eepw Delivery time: ex stock

Condition: as good as new (ex-display), Piston vacuum pump Leybold E250 State: Like new Guarantee: 12 meses Manufacturer: Leybold Type: E250 Motor Power: 5,5KW Flow rate: 290m ³/h Cpedsfn Iunspfx Aa Esw Ultimate pressure.: 4x10e-2 Delivery: Immediatly Any questions, just ask.

Condition: new, Year of construction: 2024, overall weight: 223 kg, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, NEW 2024 Airworks Silent K50T10SD Piston Compressor. 7.5KW 1074 L/min 223KG dB(A) 79 1000RPM Codpfx Aaotwba Ee Espw 11 Bar

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 79 dB(A) Volume compressed air tank: 270 liters Dimensions L x W x H: 970 x 795 x 1880 mm Cjdpfowhxlusx Aa Eepw Weight: 264 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, fuel type: gasoline, empty load weight: 11 kg, color: grey-black, gearing type: mechanical, Year of construction: 2024, TITLE: INTERNAL REAR LOCK WITH 2 PISTONS REF: 24-ATT-02 The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Cpjdpfev Hidajx Aa Eew Given the quantity of adverts and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1500 / LUFT 1500 COMPACT / THEOR 15-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced by normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants in the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Cpodoycf Nuepfx Aa Ejw Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with large surface area and precise micron rating. Optimal Price: We deliver high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter Set for Oil Change in CORMAK LUFT 400 Screw Compressors A complete set of filters is essential when changing oil in CORMAK LUFT 400 screw compressors. Regular replacement of these filters helps maintain compressor efficiency, prolongs the life of key components, and ensures clean, reliable compressed air. Oil Filter – Keeps Lubricating Oil Clean The oil filter is crucial for maintaining the cleanliness of the lubricating oil circulating through the system. It removes contaminants and metal particles generated by normal wear. Clean oil ensures proper lubrication and cooling of moving parts and extends the life of the oil separator. Purpose: Remove impurities from lubricating and cooling oil Benefits: Protects bearings and screw elements Reduces friction and overheating Extends oil service life Air Filter – First Line of Defense The air filter is the compressor’s first defense against dust and airborne particles. It effectively captures solid particles, dust, and contaminants from the environment before they enter the screw block. Using a clean air filter prevents wear of compressing elements and minimizes the risk of contaminating the oil and compressed air. Cpedpfsycf Iqox Aa Eew Purpose: Protect the screw block and the rest of the system from external contaminants Benefits: Increases compressor lifespan Maintains performance Reduces energy consumption Oil Separator Filter – Ensures High-Quality Compressed Air The oil separator filter is a key component of oil-lubricated compressors, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the output air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure drops and excessive oil consumption. Purpose: Achieve high-quality compressed air by effectively separating oil mist Benefits: Lower operating costs (reduced oil consumption) No contamination of pneumatic installation Stable pressure maintenance Why Choose Our Filters? Full Compatibility: Filters are precisely matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Filter media with large surface area and precise micron rating. Competitive Price: High quality at a cost-effective price, providing an economical alternative to OEM parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 1000 / LUFT 1000 COMPACT / THEOR 10-10 Cedpfeycf Hmsx Aa Eopw Oil filter is vital for maintaining the cleanliness of the lubricating oil circulating within the system. It removes impurities and metal particles generated through normal wear. Clean oil ensures proper lubrication and cooling of moving parts, as well as extends the service life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduction of friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from external contaminants. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Oil separator filter (separator) is a crucial part of the oil compressor, responsible for separating oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is critical for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air by effectively separating oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic installation, maintenance of stable pressure. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: new, Year of construction: 2026, Filter set essential for oil replacement in CORMAK screw compressors – suitable for models: LUFT 700 / LUFT 700 COMPACT / THEOR 7.5-10 Oil filter is essential for maintaining the cleanliness of the lubricating oil circulating in the system. It removes impurities and metal particles produced during normal wear. Clean oil ensures proper lubrication and cooling of moving parts, and also extends the life of the oil separator. Purpose: Removing contaminants from the lubricating and cooling oil. Benefits: Protection of bearings and screw components, reduced friction and overheating, longer oil lifespan. Air filter is the first line of defence for your compressor. It effectively captures solid particles, dust, and contaminants from the environment before they reach the screw block. Using a clean air filter prevents wear of compression components and minimises the risk of contamination of oil and compressed air. Purpose: Protecting the screw block and the rest of the system from contaminants from the surrounding air. Benefits: Increased compressor durability, maintained efficiency, reduced energy consumption. Csdpoycf D Sofx Aa Ejpw Oil separator filter (separator) is a crucial element of the oil compressor, designed to separate oil droplets from compressed air. A high-quality separator ensures minimal oil content in the outgoing air, which is vital for protecting pneumatic tools and production processes. Regular replacement prevents pressure loss and excessive oil consumption. Purpose: Achieving high-quality compressed air through effective separation of oil mist. Benefits: Low operating costs (reduced oil consumption), no contamination of the pneumatic system, stable pressure maintenance. Why Choose Our Filters? Full Compatibility: The offered filters are perfectly matched to the technical specifications of CORMAK screw compressors. High Filtration Quality: Use of filtration materials with a large surface area and precise micron rating. Optimal Price: We provide high quality at a competitive price, offering an economical alternative to original parts. Take care of your CORMAK compressor today!

Condition: used, Various pistons / cylinders available. Codpfx Ajwx Etyoa Ejpw Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Sound level meter in wooden case Make Brüel & Kjaer Type 4220 Weight 1,2 kg Cjdpsf Etutofx Aa Eepw

Year of construction: 2021, condition: new, machine/vehicle number: MA0134_MAXXI5,5, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 5.5 D - 270 - 10 bar Codpfx Ashu R Akoa Eepw with lying 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Delivery quantity at 7 bar: 605 l / min Sound level: 80 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 170 x 56 x 134 cm Weight: 181 kg Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Codpfx Aex Tbf Usa Ejpw Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder Cedsr Etulepfx Aa Eopw - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. Cpjdpfx Aor D U I Dea Eow - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: used, 0 800x600 mm Motor output 18,5 kW Codsyrtzwepfx Aa Eepw 0 0,6 m³ Diameter of the motor 252 mm Number of working hours 1741 h Dimensions (L/W/H) 1650x1200x1595 mm loading dimensions L x W x H 1650x1200x1800 mm Weight 1300 kg WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Cedpfx Aajyrrtxs Espw

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Cedpsyrrtlefx Aa Eopw Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Csdpfx Aoyrrpaea Ejpw Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Cpjdpfx Aasyrrlbj Esw Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) Cjdpfx Aowki Apja Espw - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. Cpjdpowg Hr Tsfx Aa Esw CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: excellent (used), Year of construction: 2015, Item: Galdi RG270UCS Used Filling machine: Galdi RG270UCS, for the inline forming, filling and sealing of Gable Top cartons. Cpodpfx Asiiyr Iea Eew Pure-Pak Classic with Crew Cup Production year 2015 Pure-Pak Classic Ultrasonic Screw Cap Applicator moved by servomotors, many spare parts incl. The machine has been in production to 2021 and was dismantled q2 2021. Carton size 70 x 95 mm, 1500ml Speed up to 7000 cartons per hours Filler Volumetric piston filler + Bottom up Lenght 7715 mm Width 1500 mm Height 3655 mm More technical details can be provided upon request. We offer two pieces identical machines.