Used Pilot for sale (811)

Condition: new, Year of construction: 2024, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clamping for fixtures - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 117 (57|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Itjdpfxor Nbzxo Affjr Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 13, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Opel Movano identical to Ducato / Jumper / Boxer Front low-floor pre-run vehicle, base vehicles available - Phonic and thermal insulation of passenger compartment - Glass gray / black in original cut-out - 13 sleeper seats plus passenger single seat or dental cabinet) + driver's seat - 2 folding seats (folding seats count as standing places) - 7 standing places / total capacity 20/21 - Wheelchair space / stroller space in special use area - Convector heating in passenger compartment - Auxiliary heating - Air conditioning in passenger compartment - Multi-stage night lighting white / orange - Roof hatch - Double-width passenger door with manual wheelchair ramp - Electric step at original sliding door Isdpfjx Hrm Aex Affjtr - Reinforced rear axle, permissible total weight 4500 kg Base vehicle with air conditioning, manual transmission, PDC with reversing camera, auxiliary heating, radio with hands-free system, multifunction steering wheel, ... Wheelbase 4035 mm Total length 6223 mm Height 2522 mm Width 2050 mm Optional: - Extra extra large windshield - Automatic transmission then engine 130 kW - Air heater Special equipment: Airbag driver/passenger side, Cool & Sound package, electrical interface for additional conversions, driver assistance system: park pilot system with reversing camera, light package 1, tire repair kit, seats in cab: adjustable passenger single seat, seats in cab: driver's seat heated Additional equipment: Exterior mirrors, single tires on 2nd axle / rear axle, driver assistance system: crosswind assistant, generator 185 A, rear wing doors with glazing (opening angle 180 degrees), high roof H2, permissible total weight 4.5 t, body/superstructure: high box van, body variant: vehicle length L4, body variant: high roof (H2), fuel tank: 80 liters, steering column (steering wheel) adjustable, headlight range adjustment, model update, engine 2.3 liters - 121 kW CDTI, pollen filter, long wheelbase, low emissions according to Euro 6d-TEMP emissions standard, sliding door loading/passenger compartment right, side marker lights, vision package, steel rims 6.5x16, LED daytime running lights, permissible total weight 4.5 t, speed limit 90 km/h Net export possible All information without guarantee These are German vehicles / no re-imports. Orders can also be placed for Citroen/Peugeot/Fiat Ducato or Opel Movano. We make shipment worldwide

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Iedpfxjxnbiae Affjtr Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 520 x 740 mm Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Grafix IR dryer

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,225 kg, first registration: 12/2025, color: grey, number of seats: 9, total length: 5,450 mm, total width: 2,275 mm, total height: 1,984 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal Number: 21217 Errors and prior sale excepted! ---- Isdpex Dpvgefx Affstr SPECIAL EQUIPMENT * 3 USB ports for the 2nd row of seats * Electrically swiveling towbar * Windows, 2nd row: Pop-out windows in the side panels * Rear air conditioning * 70-litre fuel tank * Inductive charging station for mobile devices – Qi standard * Wheels: 6.5 J x 17 alloy wheels in premium carbonised gray finish * Electric sliding doors left and right with hands-free function – Ford Key Free system including Ford Power start function – LED headlights * Technology Package 5: Electrically adjustable, heated and folding exterior mirrors – Audio system with 13-inch multifunction display, Ford SYNC 4 with navigation – Blind Spot Assist including Cross Traffic Alert & Reverse Emergency Braking – Pre-Collision Assist, camera and radar based – Driver drowsiness alert – Lane keeping, lane departure, lane change assist, Lane Pilot – Traffic sign recognition – Wrong-way alert function – Front/rear park assist system – Adaptive cruise control including Stop&Go function – Intelligent speed limiter with speed limit display – Reversing camera – Sensico leather-look steering wheel * Carpet floor mats, front FURTHER EQUIPMENT * 2 grab handles on driver and passenger sides * Two-stage release for passenger compartment and cargo area * ABS * Body-colored mirror housings * Flat roof * Roof console * Rear double-wing doors * Rev counter * Third brake light (with LEDs) * ESP – Hill Start Assist – Emergency Brake Assist – Traction control * Electric front windows with quick up/down for driver and passenger * Electronic parking brake * FordPass Connect – Wi-Fi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Lockable glove compartment * Heated, fixed rear window * Rear window wiper * Interior lighting in passenger area * Front interior lighting * LED cargo area lighting * Small centre console * Driver drowsiness alert * Emergency call assistant (eCall emergency system) * Front and rear Park Assist system * Particulate filter: Diesel particulate filter (DPF) with SCR catalytic converter * Radio accessories: 10 speakers * Tyre repair kit * Tyre pressure monitoring system * Steering column-mounted gear lever * Rain-sensing wipers * Front and rear mudguards * Fixed side windows, third row, left and right * Fixed side windows, second row, left and right * Power steering * Front seatbelts * Seats: Rear seat package 3 – 2nd row with 3 single seats – 3rd row with 3-seat bench * Seat Package 47: Driver's seat, 4-way manual adjustment, with adjustable inner armrest – Fixed front double passenger seat – Headrests, driver and passenger – Heated seats for driver and front passenger (outer seat) – Folding tray on passenger seat – Lumbar support for driver – Side airbags, left and right – Passenger airbag – Head-shoulder airbags, front left and right – "Barlo Style" fabric upholstery in Black Onyx, seat backs and bolsters in Euro New Onyx fabric * Start-stop system * 12-volt socket in the load/passenger compartment * Body-colored front and rear bumpers * Carpet flooring throughout vehicle * USB port for the 2nd row of seats * Recirculating air heater * 4 lashing eyes * Immobilizer * Privacy glass, medium tinted side windows from B pillar * Central locking with remote control – plus second key with remote … and much more. ---- 1st owner. De

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder Iodpfx Afsx Dkk Ssfotr - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Itsdpfx Afsw U A I Eofor Plant includes: - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: S2749544010016, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, rotational speed (max.): 16,000 rpm, number of slots in tool magazine: 167, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Rotary pallet storage system PSS-R1800 with 10 storage locations - 167 tools in system _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1,000 m³, filter class ISO ePM1 80% Machine cooling system with air-cooled cooling unit dynamic package Electrical cabinet lighting Machine control system SINUMERIK ONE with machine control GROB⁴Pilot gen. 2 Swivel axis calibration GSC for 4-axis machining centers Program for creation of an automatic clamping sequence Time-controlled start of warm-up program - programmable at the HMI EES function to realize CN program on an external data carrier (SIEMENS) Technology package SINUMERIK MDynamics - milling (SIEMENS) Control panel to enter tool data at tool loading and unloading position Pallet guide element at rotary table Extension of B-axis' radius of action Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 167 (47+10|50|60) tool pockets Tool cleaning device Tool coding, system BIS-M Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Setup station door for manual loading and unloading and automatic load and unload systems Rotary pallet storage system PSS-R1800 with 10 storage locations Air gun at setup station Cutting fluid return from pallet storage system PSS to machining center Lighting in the setup station of the PSS pallet storage system Itjdpewz Eddjfx Affsr Clamping program editor for setup station of PSS-R450-1800 Support EES-call PSS-R450-1800 Support GSC swivel axis calibration PSS-R450-1800 NC program management system by the primary control PSS-R450-1800 Tool requirement planning PSS-R450-1800 5x Pallet 500 x 630 mm, T-slots Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Cooling fluid system Premium - system description Premium flushing package Part clamping system in work area, customer-specific Part clamping system in setup station of pallet storage system PSS, customer-specific Part clamping system in setup station of pallet changer, customer-specific Rotating inspection glass for work area door Infrared probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: used, mileage: 15,900 km, power: 81 kW (110.13 HP), first registration: 10/2020, fuel type: gasoline, overall weight: 1,940 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Airbag driver/passenger side Airbag driver's side Cool & Sound package 1 Multimedia audio system, Bluetooth hands-free system, air conditioning Cruise control system (cruise control) Heated front seats Front left seat adjustment (6-way), front right seat adjustment (4-way) Audio controls on the steering wheel Electric front windows with anti-trap protection Exterior mirrors electr. adjustable and heatable, electr. folding Ijdovra Tvepfx Affetr Rear parking pilot system Further equipment: Airbag driver's side, Sliding door passenger/load compartment right-hand side removed, Driving assistance system: Hill start assist (HSA), Rear wing doors without glazing, Body/structure: Box, Load compartment partition closed, Engine 1.2 ltr. - 81 kW, Petrol particulate filter (OPF), Wheel hub covers, Wheelbase 2785 mm, Low-emission according to Euro 6d emissions standard, Start/stop system

Condition: used, mileage: 129,500 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2024, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 11 m³, loading space length: 3,400 mm, loading space width: 1,710 mm, loading space height: 1,900 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Sonderausstattung: Laderaumleuchte LED, Schiebetür Lade-/Fahrgastraum links, Sicht-Paket 1 Weitere Ausstattung: 3. Bremsleuchte, Ablage im Dachhimmel Fahrerhaus, Airbag Fahrerseite, Antriebs-Schlupfregelung (ASR), Audiosystem: Radio/CD-Player mit Multi-Funktions-Display, Außenspiegel elektr. verstell- und heizbar, Blinkleuchte in Außenspiegel integriert, Bodenbelag: Vinyl im Lade-/Fahrgastraum, Bordcomputer, Dachverkleidung Himmel im Fahrgastraum, Drehzahlmesser, Elektr. Bremskraftverteilung (EBD), Elektron. Differentialsperre (EDS), Fahrassistenz-System: Berganfahr-Assistent, Generator 165 A, Haltegriff B-Säule, Heckflügeltüren ohne Verglasung (Öffnungswinkel 180 Grad), Heizung mit Umluftschaltung, Innenraumfilter: Pollenfilter, Karosserie/Aufbau: Kasten Hochraum, Karosserievariante: Mittelhohes Dach, Kühlergrill silber, Laderaumtrennwand hoch hinter Fahrer und Beifahrer, Lenksäule (Lenkrad) höhen-/längsverstellbar, Leuchtweitenregelung, LKW-Zulassung, Motor 2,0 Ltr. - 96 kW TDCi KAT, Parkpilotsystem vorn und hinten, Produktionsstätte: Otosan, Radstand 3750 mm, Radvollabdeckungen, Reserverad in Fahrbereifung, Schadstoffarm nach Abgasnorm Euro 6, Schiebetür Lade-/Fahrgastraum rechts, Seitenschutzleisten breit (Seitenbeplankung), Sitz-Paket 13: Fahrersitz (4-fach verstellbar) - Beifahrerdoppelsitz, Stoff, Sitze im Lade-/FG-Raum: 1.Reihe, 3er-Sitzbank, Stahlfelgen 6,5x16, Stoßfänger teillackiert, Trend, Trittstufe hinten integriert, Verglasung getönt, Verkleidung im Lade-/FG-Raum: halbhoch, Zweiter Schlüssel mit Fernbedienung klappbar Isdpfsw A Ea Ijx Affjtr Please call us at WhatsUp/Viber also) E-mail:

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 11,798 h, load capacity: 3,000 kg, lifting height: 3,670 mm, fuel type: electric, mast type: telescopic, construction height: 2,525 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Gearbox: Electromechanical Technical condition: Very good Front tires Type: Superelastic Front tires Size: 23x10-12 Rear tires Type: Superelastic Rear tires size: 18x7-8 Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Hoppeke Battery year of construction: 2015 Description: Incl. charger Isdpfx Afou D Tf Hjfjtr Sideshift, 3rd valve, rear working lights, front working lights, half-cab, Safety Light, Safety Pilot, Double pedal control, Blue-Spot

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs Isdpfxowkpxko Affotr - marking of various materials

Condition: used, mileage: 37,310 km, power: 110 kW (149.56 HP), first registration: 08/2023, fuel type: diesel, overall weight: 3,000 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,980 mm, loading space length: 1,387 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0757. X001889 ----EQUIPMENT Registered as truck (N1) * Towbar, fixed - incl. trailer stabilization * Seat configuration - 5. Armrests: Armrests for left seat in driver's cab * Seats 1st row: front double passenger seat bench on the right with lockable compartment under seat * Suspension: Rear suspension reinforced * Windows (glass in cargo/passenger area) - Front side windows in heat-insulating glass, rear side windows and rear window tinted (privacy) * Gross weight: Permissible gross weight 3000 kg * Cruise control including speed limiter * Rear window with heat-insulating glazing, heated, and rear window wiper/washer system * Interior lighting with LED technology in cargo/passenger area - entry lighting in the tailgate * Paint: Solid * Package: Comfort Package Plus - 2x 12-volt sockets - Manual air conditioning in cab - Seat upholstery fabric, design "Bricks" - Waste bin for door compartments in cab - Additional soundproofing in cab - Height adjustment for left single seat in cab - Glove compartment with lighting - Sun visors with mirrors and airbag label on passenger sun visor - Entry grab handle on A-pillar, driver and passenger side - Lumbar support for left single seat, manually adjustable in first row * ParkPilot front and rear * Radio "Composition Colour" with 6.5" touchscreen, 2 USB ports (type C) in dashboard, 4 speakers: 2 tweeters, 2 woofers, App-Connect * Driver assistance systems: Rear view camera "Rear View" (static guidelines) * Sliding door in passenger/cargo area: sliding door left * Flooring: Universal floor in passenger/cargo area - Universal floor in cargo area with loading sill protection rear - Step lighting in passenger/cargo area * Registered as a truck without seats in passenger area - Commercial vehicle type plate with EU type approval, with weight specification, with COC documents - No seats in second row - Registered for up to 5 seats * Airbag for driver and passenger - with passenger airbag deactivation - Seatbelt tensioners for outer seats * All-wheel drive 4MOTION (permanent) * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill-start assist * Third brake light * Heat-insulating glazing green * Rev counter * Seatbelts: 3-point automatic seatbelts, height-adjustable on outer seats in cab * Brake systems: Electronic Stabilization Program, ABS, ASR (with deactivation button), EDS, Hill-start assist - Brake assist * Chassis: 16" chassis with 16" brake system * Windows: Heated rear window * Power windows * Transmission: DSG (dual-clutch gearbox), 7-speed automatic * Flooring: Rubber flooring in cab * Glove compartment with lighting * Storage compartments - Glove compartment with lockable lid * Tailgate with window cutout * Child safety lock, electrically operated * Front headrests, height adjustable * Fuel tank with 70 l capacity * Headlight range control * Multi-collision brake * Non-smoker specification, 12-V socket and cup holder in the dashboard Itodpsx A N Imefx Affjr * Radio accessories: Digital radio reception DAB+ * Tire pressure monitor * Particulate filter: Diesel particulate filter including SCR and AdBlue tank * Sliding door in passenger/cargo area: sliding door right * Windows: Fixed side window in cargo/passenger area

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3,796 h, functionality: fully functional, machine/vehicle number: S2909835010226, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 21,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 21.000 rpm - pallet change system for 2 pallets - High-pressure cutting fluid system (40 bar) _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced Energy efficiency package EEP1 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Pallet change system for 2 400 x 400 mm pallets Setup station door, automatic, for manual and automatic loading and unloading 2x Pallet 400 x 400 mm, T-slots, with pallet changer hook Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)  Cooling unit for hydraulic proportional valves Part clamping system in the setup station of the pallet changer KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1) Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR) Itjdpfx Afjxtknpsfor Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: used, mileage: 7,900 km, power: 121 kW (164.51 HP), first registration: 02/2025, fuel type: diesel, next inspection (TÜV): 02/2026, fuel: diesel, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, truck registration, Overhead storage in driver’s cab headliner, Anti-lock Braking System (ABS), Drive type: Front-wheel drive, Audio system 13: Digital radio reception (DAB / DAB+) with 4. Multifunction display, Audio system: Radio with USB and Bluetooth hands-free system, audio/radio remote control on steering wheel, docking station (MyFord Dock), radio pre-wiring, 4 speakers. Electrically adjustable and heated exterior mirrors, indicator integrated into exterior mirrors, on-board computer, entry lighting, Electronic Brakeforce Distribution (EBD), Electronic Stability Program (ESP), Electronic Traction Control, Driver assistance system: Hill Start Assist, Emergency Brake Assist, Crosswind Assist. Power windows, FordPass Connect including eCall, Automatic transmission (8-speed), rear wing doors (opening angle 180 degrees), heater with recirculation mode, Body/Build: high-roof panel van standard, body version: medium-high roof, air conditioning, automatic climate control, radiator grille with chrome strip, adjustable steering column (height/length), engine 2.0 Ltr. - 121 kW EcoBlue catalytic converter, My Key (2 programmable vehicle keys), digital radio reception (DAB+), wheelbase 3750 mm, particulate filter, low emissions according to Euro 6d-TEMP standard, low emissions according to Euro 6e standard, leather gear selector knob, interval wipers adjustable, right side loading/passenger compartment sliding door, rear mudflaps, side protection strips, Start/Stop system, daytime running lights, Technology Package 2: fog lights, audio system: radio with USB and Bluetooth hands-free, audio/radio remote control on steering wheel, docking station (MyFord Dock), front and rear park pilot system, cruise control, leather steering wheel, reversing camera, driver assistance system: lane keeping assist, Trend trim, integrated rear step, 10 lashing rings, Roll Stability Control (RSC), lightly tinted heat-insulating glazing, central locking with remote control, permitted gross vehicle weight 3.50 ... Subject to changes, prior sale, and errors. Itedpex E Nv Sjfx Affor

Condition: used, mileage: 26 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2025, emission class: euro6, color: silver, number of seats: 4, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, * 2nd battery (75 Ah, AGM) with isolating relay and battery monitoring * Armrests for both seats in the cab * Exterior mirrors, electrically adjustable, heated, and foldable, including fold-in function via vehicle key * Swivel seat on the right in the first row (not height adjustable) * Height adjustment for the left single seat in the cab * Seat heating for driver and passenger seats, individually adjustable * Lumbar supports for the left and right single seats in the first row (both manually adjustable) * Multifunction leather steering wheel (3-spoke) * Auxiliary heater for cab and cargo area with remote control and fuel-powered supplementary heater * Premium multifunction display with multicolor screen and fatigue detection * Central locking with remote control and interior operation * 2 USB-C ports in the dashboard * 4 speakers: 2 tweeters, 2 woofers * Digital radio reception (DAB+) * Premium multifunction display with color screen * Mobile phone interface Itodpox E I Dzofx Affjr * "Discover Media" navigation system with 20.3 cm (8-inch) color touchscreen including streaming and internet * Voice control * Wired & wireless App-Connect * Adaptive cruise control (ACC) with speed limiter * Airbags for driver and passenger, with passenger airbag deactivation * Hill start assist * Electronic stabilization program, ABS, ASR (with deactivation switch), EDS, hill start assist, and brake assist * High beam control “Light Assist” * Rear window with thermal insulation glazing, heated, and rear window wash/wipe system * Fatigue detection * Emergency call system eCall * ParkPilot at front and rear * Start-stop system with brake energy recuperation * Interior safety mirror, automatically dimming * Lane keeping assistant “Lane Assist”, lane change assistant “Side Assist”, and exit assist * Rear view camera “Rear View” (static guide lines) * Electromechanical power steering, speed-sensitive, steering column height and length adjustable * LED main headlights with LED daytime running lights and LED tail lights * Windshield wiper interval control with rain sensor for front wipers * Crosswind assist * Traffic sign recognition * Immobilizer (electronic) * Area monitoring system “Front Assist” with City Emergency Braking (for adaptive cruise control ACC) * 1 12-volt socket in the dashboard * 16" chassis with 16" brake system * 2 remote folding keys * 2-seat bench on the left, folding backrest with armrest on the aisle side, in the second row * 4 "Aracaju" alloy wheels 7J x 17, in black, gloss-machined surface * 2.0 L/110 kW (4V) TDI CR diesel engine * 6-speed manual gearbox * Emission standard Euro 6d ISC-FCM * Acoustic package * Base vehicle for body manufacturers * Operating voltage 12 V * Floor covering preparation for 1st row in the passenger/cargo area * Camper preparation * 3-point automatic seatbelts, height adjustable on the outer seats in the cab, with electric belt tensioners * Electrical terminal strip and function control unit 1 with ABH programming * Exterior package * Driver assistance package Plus * Cab seat package for body manufacturers * Standard suspension and damping * Entry grab handle on the A-pillar, on driver and passenger side * Foldable grab handles on the roof frame * Glove compartment with lighting * Tailgate with window cut-out and closing aid * Tailgate closure without relea

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) Ijdpfx Aew Et Iljffotr - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 12/2025, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,920 mm, total width: 2,274 mm, total height: 3,260 mm, loading space length: 4,347 mm, loading space width: 2,126 mm, loading space height: 2,263 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal number: 19316 Errors and prior sale excepted! SPECIAL EQUIPMENT * Battery: 2 AGM batteries (replaces standard battery) – incl. extended battery runtime up to 30 minutes * Bi-xenon headlights with static cornering light, LED daytime running lights – incl. headlights with static turning light * 95 l fuel tank * Seat package 3A: Driver's seat electrically adjustable in 10 ways – double passenger seat – height-adjustable headrests – driver’s and (outer) passenger seat individually and variably heated – folding tray at passenger double seat – driver's inner armrest – driver's lumbar support – passenger airbag – right & left side airbags – right & left head/shoulder airbags – seat upholstery: fabric – heated steering wheel – leather steering wheel * Technology package 15: Exterior mirrors electrically adjustable and heated – Blind Spot Assist incl. Cross Traffic Alert – Ford audio system – fog lights – Pre-Collision Assist, camera and radar based – Lane Keeping Assist – extended Traffic Sign Recognition – front Park Pilot system – adaptive cruise control with Stop & Go function – reversing camera – navigation system * Conversion by Kunath: Lightweight box body ALUVAN eCoVan ultra light – MBB Palfinger tail lift ADDITIONAL FEATURES * Driver’s airbag * ABS with electronic brake-force distribution – ESP with traction control – hill start assist – crosswind assist – safety brake assist – rollover protection – emergency brake support with emergency brake light * Battery: Programmable battery runtime up to 10 minutes * Rubberized floor up to partition wall * On-board computer with consumption and mileage info (e.g. remaining range) as well as outside temperature display and Ford ECO-Mode * Roof, front overhead storage compartment * Headliner in driver’s cab * Roof marker lights * Electric front windows with quick-down/-up function on driver’s side * Electronic parking brake * Ford Easy Fuel – comfort fuel cap and misfueling protection * FordPass Connect incl. live traffic information and Wi-Fi hotspot (5G modem, up to 5G/LTE for up to 10 mobile devices) * Heated windscreen * Additional lockable glove box * Interior lighting with delay and front reading lights * Interior mirror * Automatic climate control * Headlight leveling control * Emergency call assistant Ijdjxngvfopfx Affjtr * Particulate filter: diesel particulate filter * Radio: 12-inch multifunction display and Ford SYNC 4 communication and entertainment system with voice control plus Bluetooth and USB port – supports various phone functions – music playback – integration of storage devices – emergency call assistant – Ford Power-Up software updates – AppLink (wireless) – support for Android Auto and Apple CarPlay – capacitive touchscreen – 15 languages, graphical and audible * Full wheel trims * Tire repair kit * Tire pressure monitoring system * Wheels: steel wheels 6.5J x 16 with 235/65 R16 tires * Wipers with rain sensor * Headlights: halogen dipped beam headlights with daytime running lights * Power steering * Safety belts – belt tensioners and force limiters at the front * Start-stop system * Front bumper * Recirculation control / front heating * Immobilizer * Central locking with remote control – 2 keys, one with remote * Overhead storage compartment at the front ...and much more.----1st owner. German specification. Errors and prior sale excepted!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2930815010072, travel distance X-axis: 450 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 665 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 12,000 rpm, operating hours of spindle: 349 h, coolant supply: 40 bar, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Automation PSS-T300 - 117 tools in the magazine - IKZ 40 bar Basic machine G150 Travel path of the X-axis 450 mm Travel path of the Y'-axis 670 mm Travel path of the Z-axis 665 mm Power supply system 400 V, 50 Hz, TN-S Compressed air system, with pressure booster, operating pressure 5 and 9 bar, pressure vessel volume 10 l Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³, filter class ISO ePM1 80% Machine cooling system GCU (24 kW) with air-cooled cooling unit Modified door at machine column in case of integration of an automation system Machine control system HEIDENHAIN TNC7 with GROB⁴Pilot generation 2 Swivel axis calibration GSC Advanced Interface for connection of an automation system - standard interface version 1.7 (GROB) Control panel to enter tool data at tool loading and unloading position (HEIDENHAIN) Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Rotary table with EROWA MTS pallet clamping system (B-axis) Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools, BLUM-NOVOTEST Pallet storage tower system PSS-T300, basic module Host computer software PROCAM EMS light 10 xEROWA pallet, MTS 320 x 320 x 48 mm / STM 160, T-Slot 3 x Pallet ITS ø148 G (EROWA) 3 x EROWA pallet ø 148 P for part clamp EROWA adapter pallet MTS - ITS (STM160) High-pressure cutting fluid system (10-40 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Changeable cutting fluid pressure increase for the motorspindle nozzles Itedpfox Ex Rxjx Affer Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flushing unit for the base of the work area Flushing unit (Z-axis) Part clamping system in work area, customer-specific - Compressed air, manual pressure regulation, 0.5-5 bar (P8.1) - Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Machine status light, 3-colored Machine accuracy package 1 Radio touch probe RMP400 (RENISHAW) 12-month warranty

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system Iedpfxsv Sybys Affotr - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2910555210188, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 30,000 rpm, coolant supply: 80 bar, number of slots in tool magazine: 326, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: Ijdpfx Aex Evyksffotr - powerful Motorized spindle with 30,000 rpm | HSK-63 - TM200 with 200 tool pockets - IKZ 80bar Basic machine G550 AB generation 2 Travel path of the X-axis 800 mm Travel path of the Y'-axis 1020 mm Travel path of the Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control HEIDENHAIN TNC 640 with machine control panel GROB4Pilot Swivel axis calibration GSC Classic Interface (software and hardware) for connection of an automation system - standard interface version 1.7 (GROB) Time-controlled start of warm-up program - programmable at the HMI Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Pallet guide element at rotary table Motorized spindle HSK-A 63 30,000 rpm, 48/63 Nm, 40/53 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 126 pockets in total Additional tool magazine TM200 HSK-A 63 with 200 tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Scraper-type conveyor for larger quantities for aluminum chips, discharge height 1,600 mm High-pressure cutting fluid system (10-80 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Volume cutting package with detection element and flushing function Flushing unit (Z-axis) Machine accuracy package 1 Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: N2832055210401, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, controller manufacturer: Siemens, controller model: SINUMERIK ONE, rotational speed (max.): 14,500 rpm, coolant supply: 80 bar, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 100, 14,500 rpm, 225/261 Nm, 50/58 kW - 80 tools in the system - latest machine generation _____ Basic machine G550 AB generation 2 Travel path X-axis 800 mm Travel path Y'-axis 1020 mm Travel path Z-axis 970 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Machine control system SIEMENS SINUMERIK ONE with GROB⁴Pilot Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-T 100, 14,500 rpm, 225/261 Nm, 50/58 kW, oil-air lubrication Double disk-type tool magazine HSK-A 100 with a total of 80 tool pockets Tool cleaning device Electromechanical tool breakage detection device Itjdpfx Asxupggoffor Laser measurement system LaserControl for mill and turn tools Tool elevator Pallet 630 x 630 mm, with star-configured T-slots, without pallet changer hook Slat band chip conveyor, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Machine accuracy package 1 Preparations for the use of a radio signal receiver from the Remote machine diagnostics with access control switch 12-month warranty

Condition: new, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - 227 tools in the magazin - High pressure cutting fluid system (80 bar) _____ Basic machine G440 Travels: X=800, Y=800, Z=800 mm Power supply 400 V, 50 Hz, TN-S Machine cooling system with a air-cooled cooling unit (20 kW) SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication (GROB) GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Double disk-type tool magazine HSK-A 63 with 227 (47+10|50|60|60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station rotated manually Setup station door, manually-operated, for manual loading/unloading Pallet, 500x500 mm, grid with tapped holes Equipping the pallet with 4 fluid connections Scraper-type conveyor, for larger quantities, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center Itjdpfst Hrz Dsx Affjr External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Part clamping system in work area - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Part clamping system in setup station of pallet changer - KP1: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) - KP4: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Preparations for using infrared touch probe OMP60 (RENISHAW) Rotating inspection glass for work area door Remote machine diagnostics with access control switch 12-month warranty

Condition: like new (used), Year of construction: 2023, machine/vehicle number: U2456335210135, Highlights: - Powerful HSK-A 63 Motorizied spindle with 16.000 rpm - Highly dynamic rotary table - Latest Machine Generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, manually operated, for manual loading/ unloading Decentralized work area mist collector 800 m³ SIEMENS SINUMERIK 840D sl machine control with GROB⁴Pilot Swivel axis calibration GSC Advanced Time-controlled start of warm-up program - programmable at the HMI Tilting table, highly dynamic rotary table (A axis) Highly dynamic rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnosis GSD Double disk-type tool magazine HSK-A 63 for extra-long tools with 105 (45+60) tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette ø320 mm, T-slots arranged in a star shape Pallet equipped with 4 fluid connections Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Cooling unit for hydraulic proportional valves Additional control panel Iedpfxouqiu Ae Affstr Platform at the tool magazine door Machine status lamp in the machine enclosure Preparations for use of radio signal receiver (RENISHAW) Radio touch probe RMP600 (RENISHAW) Remote machine diagnostics with access control switch 3-month warranty

Condition: new, Year of construction: 2025, machine/vehicle number: N2097535010017, Basic machine G350 access-SERIE - FACTORY | NEW MACHINE - Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 770.0 mm Travel path of the Z-axis 805.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Stainless-steel internal work area enclosure HEIDENHAIN TNC 640 with GROB4Pilot access Control panel at tool loading and unloading position Tilting table unit (A'-axis) Rotary table with T- slots (B‘- axis) Iedpfjqqi Dksx Affetr Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Scraper conveyor , discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (4 kW) Compressed air feed through spindle center Air gun at the work area Flush gun at the work area Flushing unit (Z- axis) Compressed air cleaner bar for safety screen in work area door Rotary distributor in B'-axis rotary table with hose installation Remote machine diagnostics with access control switch 12 month warranty

Condition: new, Year of construction: 2025, machine/vehicle number: N2761135210252, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, controller manufacturer: Siemens, controller model: ONE, rotational speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW - 117 tools in the system - latest machine generation _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Iodpfxoxqlp Ns Affetr Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³, filter class ISO ePM1 80% Work area door, automatic, for manual and automtic loading/ unloading Machine control Siemens ONE with GROB4Pilot GROB- NET4Industry starter package Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis) Motorized spindle HSK-A 63, 16.000 min-1, 159/206 Nm, 25/32 kW, oil- air lubrication Double disk-type tool magazine HSK-A 63 with a total of 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Palette 400 x 400 mm, grid holes, without pallet changer hook Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) machine cooling unit with air- cooled cooling unit (11 kW) Compressed air feed through spindle center Flushing unit for the base of the work area Air gun at the work area Flush gun at the work area Flushing unit (Z- Axis) Preparations for use of a machine accuracy package Remote machine diagnostics with access control switch 12-month warranty