Used Part Device for sale (23,023)

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out! Blsdsyty E Espfx Ab Ief

Condition: defective spare-parts repository (used), Year of construction: 2004, Spare parts from Deckel Maho DMF 360 linear for sale. The machine is used exclusively as a spare parts donor. The machine is complete in all components. For example: iTNC 530 control, complete control cabinet, SK50 spindle as new, cooling unit, partition wall, rack wall, SK50 swivel head Hirth (defective), chip conveyor, high-pressure coolant system 80 bar, various other used parts in good condition. Prices on request, plus 19% VAT. Bsdpfx Aoytx Dmjb Ielf

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Bodjytr Swjpfx Ab Islf Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg Bedpfjytn Hkjx Ab Iolf You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Year of construction: 2023, condition: excellent (used), Professional pneumatic device for emptying SEMCO 600 ml cartridges and containers, designed for industrial applications (adhesives, sealants, pastes, high-viscosity materials). Manufacturer data: • Manufacturer: axiss GmbH (Germany) • Type: 9110 / B-SEMCO600-PN-KM-F • Year of production: 2023 • Serial number: 514 • Quality standard: DIN EN ISO 9001:2015 • CE marking Bodpfx Abeyc Nzuo Ijlf Technical description: • Pneumatic emptying of SEMCO 600 ml cartridges • Robust construction on an aluminium profile mounting plate • Piston assembly with transparent sleeve (position control) • Pressure regulator with pressure gauge • Directional control valve • Pneumatic quick couplings • Shut-off valve (safety) • Vertical or horizontal mounting possible • Smooth and controlled operation

Condition: excellent (used), For sale: precision measuring instrument UNIVERSAL CONCENTRICITY GAGE, manufactured in the USA, designed for measuring concentricity, runout, straightness, and inspection of rotating components. The set comes complete with a Blankenhorn 0.01 mm or Käfer 0.01 mm dial gauge (Made in Germany). Features a stable base, precise guides, and a holder with micrometric adjustment. The technical condition is very good – the equipment is fully operational, sourced from a German quality control department. Technical data: • Manufacturer: Universal Gage Co., USA • Model: Universal Concentricity Gage • Accuracy: 0.01 mm • Measuring range: approx. 0–100 mm • Gauge: Blankenhorn / Käfer – Made in Germany • Condition: used, functional, very good Bjdpfextwxuex Ab Ielf

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 Bodpfsxn Awxex Ab Iolf • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Year of construction: 2011, condition: good (used), functionality: fully functional, Clean-o-mat SP 120 Usable basket diameter approx.: 1140 mm Blodjyth Uzspfx Ab Ief Usable height approx.: 500 mm Loading height approx.: 830 mm Permissible basket load: 500 kg Fluid volume: 210 l Pump delivery rate: 280 l/min Connection data: 230/400 V / 24 A / 50 Hz Pump motor power: 4 kW Heating capacity: 9 kW Rotary basket drive: 0.09 kW 1-stage steam extraction: 0.45 kW Overall height approx.: 1250 mm

Condition: good (used), Year of construction: 1991, material Stahl weight 300 kg turning speeds 1400 U/min Bedpfjynmp Hox Ab Iolf motor 75 kW The Höcker Polytechnik L 300 industrial blower, built in 1991, impresses with its robust construction and an impressive air flow rate of 7,200 m³/h. With a 7.5 kW motor and a speed of 1,400 rpm, it is ideal for extraction and conveying tasks in workshops, production facilities, and filter systems. The fan runs reliably, is designed for durability, and comes from a renowned German manufacturer. Perfect for anyone looking for a solid and powerful solution for air and material transport.

Condition: new, Year of construction: 2025, Marking: Slootvuil schotten - Nieuw Bjdpsytdf Nofx Ab Islf

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: P3000-03-10-04798, pressure: 5.5 bar, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the specified periods, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 5.5 bar MACHINE DETAILS Voltage: 115/230 V Frequency: 50/60 Hz Power: 120 VA Dimensions & Weight Dimensions (L x W x H): 550 x 300 x 700 mm Machine weight: 30 kg Blodpfxoyniyzj Ab Ief External reference: Lot 1 / Wittner

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Bljdpfxsxggc Ne Ab Ijf machine without flywheel drive motor and frequenzy regulator

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Bledpfx Abevkdkio Ief Power: 3.1 kW

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief Blodpjp Stgnofx Ab Ief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools Blodpfx Ajh Aw Rnob Ief While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, Year of construction: 1997, open-circuit voltage 280 - 320 VDC current intensivity 30 - 80 A output voltage 140 VDC cutting medium Air / Nitrogen total power requirement ca. 11,2 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,90 x 0,35 x 0,50 m Plasma Cutting Machine HYPERTHERM - Hypertherm Powermax 1100 ERTHERM RT 80 hand torch Blsdeym D Anopfx Ab Ief - Recommended cutting capacity: 22 mm - Maximum cutting capacity: 29 mm - Severing capacity: 38 mm - Gas: Air or nitrogen - Gas inlet pressure: 6.1 bar - Gas flow rate: 189 l/min

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Blodpfxounv Rxe Ab Iof Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633)

Condition: new, THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES & SPARE PARTS ARE AVAILABLE FOR PURCHASE: 1x Canon MC-30 Maintenance Cartridge 1x Toner Canon PFI-1700 MBK 1x Toner Canon PFI-1700 PBK 1x Toner Canon PFI-1700 M 1x Toner Canon PFI-1700 PM 1x Toner Canon PFI-1700 PC Bodpfxsx Hym Re Ab Iolf 1x Toner Canon PFI-1700 Y 1x Toner Canon PFI-1700 GY

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 600 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,000 mm, total width: 1,900 mm, warranty duration: 12 months, tank capacity: 2,000 l, MIXER 2000L Bjdpfx Ajyrz Eweb Iolf The mixing auger is driven by a three-phase, 4-pole electric motor with trapezoidal belt transmission. The range includes sizes from 500 to 20,000 liters.

Condition: used, DMG Mori Panel 85-240VAC 0,3A 2386389 ( 110498 ) ID-No.: 2386389 Bodpfxeymqu Rj Ab Ijlf Suppl.: 110498

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for shaped profiles and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, inner radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable from 4 to 9 m/min, 2.6 kW, 400 Volt. Bljdpfx Abjvf H I Tj Ief

Condition: good (used), functionality: fully functional, Manufacturer: Colortronic Type: CSE Blodeyryl Nopfx Ab Ief Power: 0.8 kW Equipment: Stainless steel lance with suction hose

Condition: good (used), functionality: fully functional, Manufacturer: SHINI Model: SAL-3U-CE Power: 1.15 kW Equipment: Stainless steel lance with suction hose Bledpfoyryliox Ab Isf Two units available Price: 350 EUR per unit

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Bodpfxeymga Ne Ab Iolf Total weight: 160 kg

Condition: used, Technical details: width: 1300 mm depth: 1000 mm height: 1600 mm weight of the machine ca.: 1950 / 1860 Stück kg 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Blodpfx Abju Sq Ubs Ijf Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *