Used Paper for sale (2,668)

Year of construction: 1988, condition: excellent (used), Citoborma 480 AB paper drilling machine Nsdpfxoppauls Adhowp

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 6741108, cutting width (max.): 1,370 mm, Size 137 cm, Program, Spare knife, Excellent condition Nwjdpfx Adew Inyyshsp Machine no.: 6741108

Year of construction: 2004, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power. Nodpfx Ajkkcppodhewp

Condition: used, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland type R96-20 No. 9745 Year of construction 1999 Load capacity 2000 kg Centering pin Ø 90 mm Suction surface outside diameter 850 mm (plus seal) Nsdodzqc Iopfx Adhjwp Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction area 0.5 m2 Vacuum min. -800 mbar Suction capacity approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Dead weight 2.5 tons

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Polar Mohr 78 XT Year of manufacture 2004 Program, upgraded air table, left and right storage table; Nsdpfewl Am Rox Adhjwp 2 knives, complete documentation, tools Visually and technically in perfect condition

Condition: ready for operation (used), 2 units for sale. Machines are operational. Good condition. Ready for work. Nodpfx Adowb Sx Iehewp

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. Nedpfx Aow Ht Uhjdhowp This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 7141440, Size 137 cm, chromed air table, program, spare knife Nedpfx Adjw Inymehewp Machine no.: 7141440

Condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. Nsdpfskkcqqex Adhswp The machine can be demonstrated with power.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Tecnau Roll to Cut&Stack’ paper cutting machine. Item for sale: 1 x Tecnau Roll to Cut&Stack Nwsdpfx Asw E Hcpjdhep Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested and is fully functional. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Year of construction: 2015, condition: ready for operation (used), This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible. Nwsdpfx Ajqzyaxedhsp

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Nwedpjvbmtbjfx Adhsp Technical condition: good Description: Year 2017 ISO 4A (61 cm) Capacity 6500 kg Rotator Opening range 500-1300 mm Width 930 mm Contact pads 280x1200 / 280x500 mm ID OS1413

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells – air table – cutting line – chrome table surface – enlarged side tables Nodpew D E Sgjfx Adhowp – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife

Condition: good (used), Used feeder in good technical condition. Nwedpfx Adswlqqwohsp

Condition: used, Year of construction: 1987, Used Paper Bag Making Machine Manufacturer: Newlong Model: RBF – 35S Serial number: 147 35 87 Year of origin: 1987 Country of origin: Japan Bag width: max 350 mm, min 220 mm Bottom width: max 180 mm, min 60 mm Tube length: max 520 mm, min 250 mm Nodew Nwwqopfx Adhjwp Speed: approx. 100 pcs/min Feeder (roll size) width: approx. 1080 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, cutting width (max.): 920 mm, overall weight: 2,000 kg, Polar 92X Year 2004 Program Nwsdpfxsw I Nu So Adhop Large side tables Spare knife Photocells

Year of construction: 2018, condition: ready for operation (used), Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual. Nsdpsilqr Sofx Adhewp

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A/4A Year 2018 Capacity 6500 kg Opening range 500-1300 mm Width 930 mm Pad 1200x270 ID OS1252 Njdpfx Aet S Sq Hedhswp

Condition: good (used), Wohlenberg 132 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture 2008. Available immediately from stock. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes various cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Premium class cutting machines from the Wohlenberg brand are manufactured in Germany in Solms. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Nodpfx Adew D E Saehewp Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Bag width: 45 mm - 125 mm Tube length: 150 mm - 340 mm Nodpfsw Nvi Ssx Adhswp Gusset: 30 mm - 75 mm Photocell Max reel width: 400 mm In-line 4-color flexo printing unit

Condition: ready for operation (used), Year of construction: 2024, A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible. Njdovr Efkepfx Adhewp

Condition: used, Year of construction: 2019, load capacity: 1,200 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm) Year 2019 Capacity 1200 kg Opening range 530-1670 mm Clamp length 1000 mm Contact pads 250x900 mm Tilt range: 90° Width 1100 mm ID OS1386 Njdpfx Adeud Eaashowp

Condition: good (used), Polar Mohr 78 XS Paper Cutting Guillotine Machine in very good condition, after inspection, ready to work. Technical data: Cutting width 780mm Stack height 120mm Nodpfx Asw D E R Njdhjwp LCD display Full programmer Power supply 400V Weight 1400kg Side tables Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table Spare knife, sticks, tapping block, operating tools.

Condition: ready for operation (used), Year of construction: 1980, Bag width: 80-260 mm. Tube length: 135-370 mm. Productivity: up to 180 pieces/min. Forming material: from 35 to 120 g Max roll width: 650 mm Nedpjw Nvhuefx Adhowp Electrical connection: 380V, 50/60 Hz Power consumption: 35 kW

Condition: used, Year of construction: 2010, load capacity: 2,300 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Nwedpfx Adsul Idlehsp Condition: Ready for use and fully functional Technical condition: good Description: Year 2010 ISO 3A (51 cm) Capacity 2300 kg Rotator 360° Opening range 250-1300 mm Width 950 mm Contact pads 250x365 mm ID OS1371